jesse
Junior Member
 Offline
Posts: 65
Thank You
-Given: 2
-Receive: 101
|
 |
« on: June 05, 2009, 07:59:37 19:59 » |
|
This topic is
Mastercam x7
and
Mastercam x8 for SolidWorks
Saludos
|
|
|
|
« Last Edit: August 25, 2014, 11:14:55 23:14 by pickit2 »
|
Logged
|
|
|
|
pjve64
Newbie
Offline
Posts: 10
Thank You
-Given: 4
-Receive: 2
|
|
« Reply #1 on: July 07, 2009, 09:25:01 21:25 » |
|
I went and tried some different combinations as the problem obviously had to do with the HASP drivers. This was done on a Windows XP servicepack 2 system, I have no access to a Vista system Below is the readme.txt file with the additions I made (at the bottom) ------------------------------------------------------------------------------------------- 1) Install Mastercam X4, select Sim Type > NetHASP 2) Run "mastercam_x4_nethasp_crk.exe", browse to <mastercam X4 progdir\mastercam.exe> click Start > OK 3) If you have got Mastercam X3 installed as Sim Type > HASP you need to delete old dump from Windows Registry! Delete Registry Entry [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\NEWHASP\Services\Emulator\HASP\Dump\584B4AE9] 4) Run "mastercam-dealer-unlim.reg" to use Mastercam with Delear type of license or "mastercam-industrial-unlim.reg" to use it with Industrial type of license I selected:"mastercam-industrial-unlim.reg" 5) If you have "USB-Emulator" already installed just restart (or reboot a computer) it so it can read a new dump 6) If you have no USB-Emulator installed you need to install it. For more infor see "USB-Emul Win32 Setup" or "USB-Emul Win64 Setup" next That's all.. Enjoy  __________________________________________________________________ USB-Emul Win32 Setup 1) Open folder "USB-Emul_Win32" and run "install.bat" 2) Wait until system will find and install new devices __________________________________________________________________ USB-Emul Win64 Setup You need a local Administrator rights to install this emulator for Win64! 1) Start -> Control Panel -> Add Hardware (Yes, I have already connected the hardware) -> Add a new hardware device -> Install the hardware that I manually select from a list -> Show all Devices -> Have disk -> Browse -> (browse to folder "USB-Emul_Win64") Confirm to install not certificated drivers if Windows ask for.. 2) If setup is succesfull you have to see new system device Device Manager -> System devices -> Virtual Usb Bus Enumerator 3) Reboot!!! __________________________________________________________________ Now you still may end up with the NO SIM message Below worked for me on a Windows XP servicepack 2 system - From the created entry "MasterCam X4" in "Programs" run Hasp Setup - Then select: NHasp X When the NHasp X screen appears select: NetHASP and Local Select Read (and you will see the entries filled). - Now you can start mastercam (This worked for me) ----------------------------------------------------------------------------- |
|
|
|
|
Logged
|
|
|
|
marty.markoh
Senior Member
Offline
Posts: 320
Thank You
-Given: 192
-Receive: 433
Everything must B explored!Remember what U see!
|
|
« Reply #2 on: July 30, 2009, 09:25:16 09:25 » |
|
Someone have NoPE's crack for MasterCam x4 samplefiles?Please share...TIA Btw. crack from http://rapidshare.com/files/247620591/Fixed_Crack.rarisn't NoPE's crac-where come from? |
|
|
|
« Last Edit: July 30, 2009, 09:52:26 09:52 by marty.markoh »
|
Logged
|
|
|
|
milenjs
Newbie
Offline
Posts: 13
Thank You
-Given: 7
-Receive: 2
|
|
« Reply #3 on: August 04, 2009, 07:42:16 07:42 » |
|
__________________________________________________________________ Now you still may end up with the NO SIM message Below worked for me on a Windows XP servicepack 2 system - From the created entry "MasterCam X4" in "Programs" run Hasp Setup - Then select: NHasp X When the NHasp X screen appears select: NetHASP and Local Select Read (and you will see the entries filled). - Now you can start mastercam (This worked for me) ----------------------------------------------------------------------------- I test and this procedure solve my "No SIM" problem Now I have working Mastercam x4. |
|
|
|
|
Logged
|
|
|
|
jesse
Junior Member
Offline
Posts: 65
Thank You
-Given: 2
-Receive: 101
|
|
« Reply #4 on: August 06, 2009, 06:05:52 18:05 » |
|
|
|
|
|
|
Logged
|
|
|
|
sgoum
Junior Member
Offline
Posts: 70
Thank You
-Given: 94
-Receive: 68
|
|
« Reply #5 on: May 03, 2010, 05:51:15 05:51 » |
|
|
|
|
|
« Last Edit: May 03, 2010, 02:16:52 14:16 by pickit2 »
|
Logged
|
|
|
|
Redhouse
Junior Member
Offline
Posts: 93
Thank You
-Given: 90
-Receive: 8
|
|
« Reply #6 on: May 03, 2010, 02:08:20 14:08 » |
|
Sorry I misunderstood, yes that unpacked the ISO...THX... I'll see if I can get ahold of SW. If anyone could post the stand alone (non plug-in) version it would be much appreciated. |
|
|
|
« Last Edit: May 03, 2010, 02:23:27 14:23 by pickit2 »
|
Logged
|
|
|
|
jesse
Junior Member
Offline
Posts: 65
Thank You
-Given: 2
-Receive: 101
|
|
« Reply #7 on: May 04, 2010, 04:20:15 04:20 » |
|
If anyone could post the stand alone (non plug-in) version it would be much appreciated. Here's the emulator for Mastercam X4 MU3, the SW can be DL from their website. http://www.filefactory.com/file/b1765gf/n/mc_x2-x4mu3_win32_win64_nethasp_crack.rar Saludos Posted on: May 03, 2010, 11:06:31 23:06 - Automerged
Jesse, do I run the stuff from this RAR before or after running mastercamx4-mu3-web.exe?
(before or after installing MC)
Hi Redhouse The RAR contains just the emulator, follow this steps to install: 1 Install Mastercam X4, when asked select NetHasp 2 Install Mastercam X4 MU3 update 3 Unpack RAR to a folder ( no needed but easier to use ) 4 Install Mastercam Key in Register ( included in Emulator folder ) 5 Install Emulator ( run Install.bat from emulator folder ) and that's it, Mastercam is ready to use. Saludos
|
|
|
|
|
Logged
|
|
|
|
Redhouse
Junior Member
Offline
Posts: 93
Thank You
-Given: 90
-Receive: 8
|
|
« Reply #8 on: May 04, 2010, 06:58:18 18:58 » |
|
Hi Redhouse
The RAR contains just the emulator, follow this steps to install:
1 Install Mastercam X4, when asked select NetHasp
2 Install Mastercam X4 MU3 update
3 Unpack RAR to a folder ( no needed but easier to use )
4 Install Mastercam Key in Register ( included in Emulator folder )
5 Install Emulator ( run Install.bat from emulator folder )
and that's it, Mastercam is ready to use.
Saludos
Just so I am clear on this, are you sure about step-2? I was reading on their website ( http://www.mastercam.com/Support/Downloads/MastercamX4/Default.aspx) that you have to have a valid mantainance lic to install MU3: "If your maintenance contract has expired prior to the date of the release, then you will not be able to run that Maintenance release." I just want to be clean in my own mind what steps to take in proper order, thanks. |
|
|
|
|
Logged
|
|
|
|
pickit2
Moderator
Hero Member
Offline
Posts: 4657
Thank You
-Given: 832
-Receive: 4300
There is no evidence that I muted SoNsIvRi
|
|
« Reply #9 on: May 04, 2010, 07:19:04 19:19 » |
|
Just so I am clear on this, are you sure about step-2? I was reading on their website ( http://www.mastercam.com/Support/Downloads/MastercamX4/Default.aspx) that you have to have a valid mantainance lic to install MU3: "If your maintenance contract has expired prior to the date of the release, then you will not be able to run that Maintenance release." I just want to be clean in my own mind what steps to take in proper order, thanks. Yes when you install software, you have NO maintenance contract. That's why the patch/crack |
|
|
|
|
Logged
|
Note: I stoped Muteing bad members OK I now put thier account in sleep mode
|
|
|
Redhouse
Junior Member
Offline
Posts: 93
Thank You
-Given: 90
-Receive: 8
|
|
« Reply #10 on: May 05, 2010, 03:57:46 03:57 » |
|
Yes when you install software, you have NO maintenance contract. That's why the patch/crack Well Duh, that's not what I mean't, I thought I was clear it was the sequence I was inquiring about, sorry I'll try to be more clear. The above had a typo "...to be clean in my own mind" should have read "to be Clear in my own mind". I was just uncertain because the MU3 said it wouldn't install w/o "something" in place prior to trying. Posted on: May 05, 2010, 12:52:29 00:52 - Automerged
Hi Redhouse
The RAR contains just the emulator, follow this steps to install:
1 Install Mastercam X4, when asked select NetHasp
2 Install Mastercam X4 MU3 update
3 Unpack RAR to a folder ( no needed but easier to use )
4 Install Mastercam Key in Register ( included in Emulator folder )
5 Install Emulator ( run Install.bat from emulator folder )
and that's it, Mastercam is ready to use.
Saludos
Did all that exactly, it didn't work. Untill... I checked the other instructions readme_Win32.txt in the second half of step #5: " run "NHaspX.exe" select SIM type > NetHASP, Mode > Local > OK" after doing that it worked fine, app launched and runs. Without that last step, when the app launched you'd just get a splash screen then a small dialog box that say's: Exiting "No SIM Found" Thanks for the help all. |
|
|
|
|
Logged
|
|
|
|
|
|
hosmis
Active Member
Offline
Posts: 173
Thank You
-Given: 334
-Receive: 243
|
|
« Reply #12 on: January 01, 2012, 10:14:47 10:14 » |
|
|
|
|
|
|
Logged
|
|
|
|
sgoum
Junior Member
Offline
Posts: 70
Thank You
-Given: 94
-Receive: 68
|
|
« Reply #13 on: June 07, 2012, 05:52:50 17:52 » |
|
|
|
|
|
|
Logged
|
|
|
|
SB7
Senior Member
Offline
Posts: 346
Thank You
-Given: 290
-Receive: 767
Cry Havoc and let slip the dogs of war
|
|
« Reply #14 on: January 09, 2013, 01:13:09 01:13 » |
|
This is for Mastercam x64 X6 MU2 or MU3 ( as the exe didn't change between updates) . Just replace the Mastercam.exe with one provided and enjoy. No USB Dongle emulator is needed , although it should also work with an EMU installed as the emu/registry check is patched as well.
This is just a patched .exe, the full installation and MU's are available directly from Mastercam under "support/downloads" in the X6 section
|
|
|
|
« Last Edit: January 12, 2013, 05:38:56 05:38 by SB7 »
|
Logged
|
|
|
|
whatchitfoool
Newbie
Offline
Posts: 9
Thank You
-Given: 25
-Receive: 0
|
|
« Reply #15 on: February 11, 2013, 02:56:31 02:56 » |
|
Am i right in the assumption that the base, and then each update needs to be installed in order to get this going? (ie, the updates are individual, not all encompassing)
|
|
|
|
|
Logged
|
|
|
|
SB7
Senior Member
Offline
Posts: 346
Thank You
-Given: 290
-Receive: 767
Cry Havoc and let slip the dogs of war
|
|
« Reply #16 on: February 11, 2013, 03:59:58 03:59 » |
|
Yes,
The updates need to be installed in order, they are not all encompassing. ( I did mention that in the readme)
You could stop @ MU2 , as the .exe didn't change between MU2 and MU3, although MU2 was a total disaster. MU3 fixed most of the things they screwed up with MU2.
If you find that the fully patched version isn't working for you, then I can provide minimally patched versions ( 8 bytes as opposed to 320 or so) that require the USB EMU's ( As close to legit as we're going to get.)( driver signing needs to be disabled for WIN7 x64 etc)
I'll post both the fully patched and minimally patched MCFSW X6 x64 MU1 DLL's in the next couple of days. I've been chasing a memory leak that I attributed to the patching, but I just discovered it behaves the same way with an EMU. ( MCFSW X6 MU1 x64 with SW2013)
Cheers
SB
|
|
|
|
« Last Edit: February 11, 2013, 04:06:10 04:06 by SB7 »
|
Logged
|
|
|
|
SB7
Senior Member
Offline
Posts: 346
Thank You
-Given: 290
-Receive: 767
Cry Havoc and let slip the dogs of war
|
|
« Reply #17 on: February 14, 2013, 11:39:40 23:39 » |
|
Minimally patched MC.exe X6 MU3 x64 with USB EMU files see readme
Posted on: February 15, 2013, 12:38:37 00:38 - Automerged
Minimally patched MCFSW.dll X6 MU1 x64 with USB EMU files see readme
NOte: These are just the patched files, you'll need to "acquire" the full install files/MU's where ever you like.
|
|
|
|
« Last Edit: February 14, 2013, 11:45:18 23:45 by SB7 »
|
Logged
|
|
|
|
Fab66
Newbie
Offline
Posts: 10
Thank You
-Given: 127
-Receive: 5
|
|
« Reply #18 on: February 15, 2013, 04:31:01 04:31 » |
|
Hello All's
also i search a french language patch for X4 MU3 and/or X6 MU3.
Thank's if you can help.
Fab
|
|
|
|
|
Logged
|
|
|
|
malcodrakefoy
Inactive
Offline
Posts: 1
Thank You
-Given: 3
-Receive: 0
|
|
« Reply #19 on: February 23, 2013, 09:21:19 21:21 » |
|
This is for Mastercam x64 X6 MU2 or MU3 ( as the exe didn't change between updates) . Just replace the Mastercam.exe with one provided and enjoy. No USB Dongle emulator is needed , although it should also work with an EMU installed as the emu/registry check is patched as well.
This is just a patched .exe, the full installation and MU's are available directly from Mastercam under "support/downloads" in the X6 section
works fine for me on my home laptop even blade expert runs without a glitch
|
|
|
|
|
Logged
|
|
|
|
cncbasher
Junior Member
Offline
Posts: 91
Thank You
-Given: 107
-Receive: 51
|
|
« Reply #20 on: February 24, 2013, 01:06:24 13:06 » |
|
MCFSW X6 MU1 x64 DLL Fully patched ( hopefully :-0) ie No EMU required Just replace the DLL and enjoy
could this be placed at a site where you don't need to subscribe to for access
|
|
|
|
|
Logged
|
|
|
|
SB7
Senior Member
Offline
Posts: 346
Thank You
-Given: 290
-Receive: 767
Cry Havoc and let slip the dogs of war
|
|
« Reply #21 on: May 17, 2013, 12:13:30 00:13 » |
|
Posted on: February 24, 2013, 08:36:20 20:36 - Automerged
MCFSW X6 MU1 x64 DLL Fully patched ( hopefully :-0) ie No EMU required Just replace the DLL and enjoy
Note: this is just the patched DLL, you need to "acquire" the full installers/MU's , wherever you like
UPDATE: bug fix
"maintenance expiry date" from 12/31/2015 to 01/01/2016 to indicate an updated/fixed DLL
New Link :
Posted on: February 24, 2013, 08:45:50 20:45 - Automerged
Mastercam X7 x64 Fully patched ( hopefully ;-0) No EMU required. ( Note: This is just the patched exe, you'll need to acquire the full install where ever you like)
Hope someone may find this useful.
Minimally tested , feedback ?
Cheers
New Link as last one was deleted
|
|
|
|
« Last Edit: May 25, 2013, 04:34:33 16:34 by SB7 »
|
Logged
|
|
|
|
PaulC
Active Member
Offline
Posts: 170
Thank You
-Given: 3935
-Receive: 133
information is free and should be shared for free
|
|
« Reply #22 on: May 17, 2013, 01:37:12 13:37 » |
|
Mastercam X7 x64 Fully patched ( hopefully ;-0) No EMU required. ( Note: This is just the patched exe, you'll need to acquire the full install where ever you like)
full version download... http://www.mastercam.com/Support/Downloads/MastercamX7/Default.aspx |
|
|
|
|
Logged
|
find it , read it , share it .
|
|
|
mitchjs
Junior Member
Offline
Posts: 37
Thank You
-Given: 1
-Receive: 105
|
|
« Reply #23 on: June 09, 2013, 08:30:08 20:30 » |
|
on a side note, Mastercam X7, seems to run a program called "ToolManager.exe" (extensions folder), which seems to be protected by a different system, WIBU codemeter
not sure what exactly its doing, do know if I uninstall the codemeter service, mastercam wont run, dll missing error
tool seems to run... so not sure whats the deal
I prefer to not have "codemeter" service running, but that would require some patching to "toolmanager"
|
|
|
|
|
Logged
|
|
|
|
sgoum
Junior Member
Offline
Posts: 70
Thank You
-Given: 94
-Receive: 68
|
|
« Reply #24 on: June 14, 2013, 01:01:39 13:01 » |
|
Enjoy
|
|
|
|
|
Logged
|
|
|
|
SB7
Senior Member
Offline
Posts: 346
Thank You
-Given: 290
-Receive: 767
Cry Havoc and let slip the dogs of war
|
|
« Reply #25 on: June 15, 2013, 11:13:51 23:13 » |
|
I was bored and noticed that CNC had released MCFSW X7 and SP1 for MCX7 , so incase anyone might find these useful.....
MCX7x64SP1 and MCFSW X7 x64 fully patched. No EMU , DSEO etc required. Just replace .exe or dll with one provided. minimally tested ...
(Note: These are just the patched files, you'll need to acquire the full installs wherever you like)
Cheers
|
|
|
|
« Last Edit: June 16, 2013, 03:57:21 03:57 by SB7 »
|
Logged
|
|
|
|
SB7
Senior Member
Offline
Posts: 346
Thank You
-Given: 290
-Receive: 767
Cry Havoc and let slip the dogs of war
|
|
« Reply #26 on: August 04, 2013, 12:43:55 00:43 » |
|
Mastercam X7 SP2 ( x64 and x86 modified files for use with USB EMU)
Mastercam x7 SP2 x64 fully patched , no EMU required.
Note: these are just the modified files, you'll need to download ?install SP2 before using these.
|
|
|
|
|
Logged
|
|
|
|
SB7
Senior Member
Offline
Posts: 346
Thank You
-Given: 290
-Receive: 767
Cry Havoc and let slip the dogs of war
|
|
« Reply #27 on: December 28, 2013, 03:06:39 03:06 » |
|
Ok, I had some time to kill between planes and I couldn't think of a better use of my time than to "fix" Mastercam.... ( how sad is that ?? LOL)
MC x7 x64 MU1 w/ SP1 hotfix fully patched .exe, no EMU required.
minimally tested... ie.. no warranty will be provided :-)
Oops ... forgot to include my usual disclaimer... NOte: This is only the "fixed" .exe, you'll need to download MC x7 x64 , MU1 and SP1 hotfix where ever you like.
Cheers
|
|
|
|
« Last Edit: December 31, 2013, 12:20:59 00:20 by SB7 »
|
Logged
|
|
|
|
SB7
Senior Member
Offline
Posts: 346
Thank You
-Given: 290
-Receive: 767
Cry Havoc and let slip the dogs of war
|
|
« Reply #28 on: February 09, 2014, 02:28:39 02:28 » |
|
Figured I'd post these little Mastercam X7 add-ons here, as .. well.... they are only useful with Mastercam. ( I suppose there could be some debate as to whether to create a new topic, but the folks who would find them useful will be the same folks that arrive in this thread.)
Verisurf, Moldplus & Moldplus CATIA . They are patched to run as if they were connected to a Dealer dongle , regardless of what dongle , emu, or patched mastercam is running.
( Industrial, Educational, Dealer ,etc)
The link.txt contains two multiupload links... either one will do as it contains the same 3 installers and patched dll's
If you find them useful, great , if not ...
|
|
|
|
« Last Edit: February 09, 2014, 02:31:08 02:31 by SB7 »
|
Logged
|
|
|
|
SB7
Senior Member
Offline
Posts: 346
Thank You
-Given: 290
-Receive: 767
Cry Havoc and let slip the dogs of war
|
|
« Reply #29 on: April 19, 2014, 06:12:23 06:12 » |
|
Ok, Mastercam have released yet another update for Mastercam x7 ( MU2)
Fully patched MC x7 x64 MU2 .exe ( No Emu required) Just replace mastercam.exe with the one provided and enjoy.
Note: This is just the patched exe, you'll have to acquire the full installers/update from where ever you like.
|
|
|
|
|
Logged
|
|
|
|
juliao
Newbie
Offline
Posts: 7
Thank You
-Given: 13
-Receive: 3
|
|
« Reply #30 on: April 19, 2014, 12:21:53 12:21 » |
|
can we download direct from mcam page?
Thanks
|
|
|
|
|
Logged
|
|
|
|
SB7
Senior Member
Offline
Posts: 346
Thank You
-Given: 290
-Receive: 767
Cry Havoc and let slip the dogs of war
|
|
« Reply #31 on: April 19, 2014, 03:42:26 15:42 » |
|
can we download direct from mcam page?
Thanks
Yes, that's where I get the files from. ( I do use a VPN but that's up to you) |
|
|
|
|
Logged
|
|
|
|
SB7
Senior Member
Offline
Posts: 346
Thank You
-Given: 290
-Receive: 767
Cry Havoc and let slip the dogs of war
|
|
« Reply #32 on: April 25, 2014, 01:04:31 01:04 » |
|
I have had a user report that the patched .exe crashes when using backplot.
As I have far more experience "inside" mastercam than actually using it, could someone more familiar with using backplot ,see if they can reproduce the crash and let me know how to reproduce it so I can investigate it ?
Thanks
|
|
|
|
|
Logged
|
|
|
|
Fab66
Newbie
Offline
Posts: 10
Thank You
-Given: 127
-Receive: 5
|
|
« Reply #33 on: April 25, 2014, 05:28:47 17:28 » |
|
Hi,
what is the backplot function ?
Kind regards,
Fab
|
|
|
|
|
Logged
|
|
|
|
SB7
Senior Member
Offline
Posts: 346
Thank You
-Given: 290
-Receive: 767
Cry Havoc and let slip the dogs of war
|
|
« Reply #34 on: April 26, 2014, 12:15:40 00:15 » |
|
I was hoping that you could explain it to me ... LOL
|
|
|
|
|
Logged
|
|
|
|
pickit2
Moderator
Hero Member
Offline
Posts: 4657
Thank You
-Given: 832
-Receive: 4300
There is no evidence that I muted SoNsIvRi
|
|
« Reply #35 on: April 26, 2014, 12:23:03 00:23 » |
|
The Backplot and Verify utilities, are that you use to check all your Mastercam tool motion
|
|
|
|
|
Logged
|
Note: I stoped Muteing bad members OK I now put thier account in sleep mode
|
|
|
Fab66
Newbie
Offline
Posts: 10
Thank You
-Given: 127
-Receive: 5
|
|
« Reply #36 on: April 26, 2014, 07:11:54 07:11 » |
|
Ah thank's yes, of course, but I not really used this fonction Posted on: April 26, 2014, 07:47:12 07:47 - Automerged
 On my laptop X7 crash after displaying work screen.... |
|
|
|
|
Logged
|
|
|
|
juliao
Newbie
Offline
Posts: 7
Thank You
-Given: 13
-Receive: 3
|
|
« Reply #37 on: April 26, 2014, 04:43:02 16:43 » |
|
With me works just fine.Althoug i´m a begginer so far never had a problem.
|
|
|
|
|
Logged
|
|
|
|
snipor
Newbie
Offline
Posts: 7
Thank You
-Given: 7
-Receive: 1
|
|
« Reply #38 on: May 26, 2014, 12:51:17 12:51 » |
|
Does anyone have a fully patched MC x7 x64 MU1 .exe? The links from post 29 are offline |
|
|
|
|
Logged
|
|
|
|
juliao
Newbie
Offline
Posts: 7
Thank You
-Given: 13
-Receive: 3
|
|
« Reply #39 on: May 27, 2014, 05:38:58 17:38 » |
|
On post 29 works ok..or you really want MU1?Why not MU2
|
|
|
|
|
Logged
|
|
|
|
Denimdragon
Newbie
Offline
Posts: 7
Thank You
-Given: 4
-Receive: 0
|
|
« Reply #40 on: July 20, 2014, 11:26:44 11:26 » |
|
I can't seem to download mc from their site. Tells me "You Must Link Your Account to Access Software Downloads" Any advice TIA?
|
|
|
|
|
Logged
|
|
|
|
SB7
Senior Member
Offline
Posts: 346
Thank You
-Given: 290
-Receive: 767
Cry Havoc and let slip the dogs of war
|
|
« Reply #41 on: July 20, 2014, 04:11:35 16:11 » |
|
Yes, it appears that they are locking their product downloads to a valid customer account.
I will say that not all mastercam sites ( different countries) link downloads back to the main .com ( US) site. ( Some host files themselves)
You have a couple of choices, torrent ( a famous Russian one always seems to have the latest version) or find a non US/UK mastercam site that hasn't put restrictive download policies in place.
Mastercam are doing what they can to impede piracy, as X8 is being previewed right now. Quite frankly, I'm surprised it took them so long.
|
|
|
|
|
Logged
|
|
|
|
optikon
Cracking Team
Hero Member
Offline
Posts: 853
Thank You
-Given: 1103
-Receive: 2007
|
|
« Reply #42 on: July 20, 2014, 04:42:34 16:42 » |
|
Mastercam X7 MU2 with Hotfix SP1 From "Famous Russian" Tracker.  See attached . . . |
|
|
|
« Last Edit: July 20, 2014, 04:46:07 16:46 by optikon »
|
Logged
|
I can explain this to you. I can't comprehend it for you.
|
|
|
Denimdragon
Newbie
Offline
Posts: 7
Thank You
-Given: 4
-Receive: 0
|
|
« Reply #43 on: July 24, 2014, 06:13:06 06:13 » |
|
Mastercam X7 MU2 with Hotfix SP1 From "Famous Russian" Tracker. See attached . . . I'm going to give this a go once I get home. Thanks! |
|
|
|
|
Logged
|
|
|
|
pickit2
Moderator
Hero Member
Offline
Posts: 4657
Thank You
-Given: 832
-Receive: 4300
There is no evidence that I muted SoNsIvRi
|
|
« Reply #44 on: August 20, 2014, 10:42:38 10:42 » |
|
Torrent Link
Size 101MB 100 plus seeders.
you can select 32 or 64 bit version plus crack
|
|
|
|
« Last Edit: August 20, 2014, 10:46:48 10:46 by pickit2 »
|
Logged
|
Note: I stoped Muteing bad members OK I now put thier account in sleep mode
|
|
|
rad_rob
Inactive
Offline
Posts: 4
Thank You
-Given: 2
-Receive: 0
|
|
« Reply #45 on: August 22, 2014, 04:39:23 16:39 » |
|
This will be super helpful for some of our new computer systems. I have a few seats of Mastercam so I was able to just emulate the key on one of our computers to get it going for now. Thanks for taking the time to do all this! Posted on: August 22, 2014, 05:35:42 17:35 - Automerged
Yes, it appears that they are locking their product downloads to a valid customer account.
I will say that not all mastercam sites ( different countries) link downloads back to the main .com ( US) site. ( Some host files themselves)
You have a couple of choices, torrent ( a famous Russian one always seems to have the latest version) or find a non US/UK mastercam site that hasn't put restrictive download policies in place.
Mastercam are doing what they can to impede piracy, as X8 is being previewed right now. Quite frankly, I'm surprised it took them so long.
I have a valid customer account since I purchased a few full seats with maintenance contracts good until next year. If you need any of the versions let me know, as I have them all stored on my network drive. |
|
|
|
|
Logged
|
|
|
|
pickit2
Moderator
Hero Member
Offline
Posts: 4657
Thank You
-Given: 832
-Receive: 4300
There is no evidence that I muted SoNsIvRi
|
|
« Reply #46 on: August 24, 2014, 11:53:14 23:53 » |
|
Mastercam X8 v17 For Solidworks x64
Medizin: patch – No Password File Size 910Mb
|
|
|
|
|
Logged
|
Note: I stoped Muteing bad members OK I now put thier account in sleep mode
|
|
|
rad_rob
Inactive
Offline
Posts: 4
Thank You
-Given: 2
-Receive: 0
|
|
« Reply #47 on: August 25, 2014, 10:41:02 22:41 » |
|
I haven't used Mastercam for SW before. Does this basically run as a standalone Mastercam, or does this open in SW? Like would you be able to run Mastercam on its own with this version, or would you need SW for it to work properly?
|
|
|
|
|
Logged
|
|
|
|
pickit2
Moderator
Hero Member
Offline
Posts: 4657
Thank You
-Given: 832
-Receive: 4300
There is no evidence that I muted SoNsIvRi
|
|
« Reply #48 on: August 25, 2014, 11:07:43 23:07 » |
|
I haven't used Mastercam for SW before. Does this basically run as a standalone Mastercam, or does this open in SW? Like would you be able to run Mastercam on its own with this version, or would you need SW for it to work properly?
There are two versions of Mastercam one is stand alone [version 7] and the other is for SolidWorks [version 8] |
|
|
|
|
Logged
|
Note: I stoped Muteing bad members OK I now put thier account in sleep mode
|
|
|
rad_rob
Inactive
Offline
Posts: 4
Thank You
-Given: 2
-Receive: 0
|
|
« Reply #49 on: August 25, 2014, 11:23:36 23:23 » |
|
There are two versions of Mastercam one is stand alone [version 7] and the other is for SolidWorks [version 8]
Yeah I was just curious because Ive always used just the standalone version and never the one for Solidworks. I have a few purchased seats of X8 for my shop, but have one extra computer I wanted to put it on, and havent found a cracked standalone yet. I found one, but its been downloading for a few days because there havent been many seeders. Once its done, Ill see if it works out. |
|
|
|
|
Logged
|
|
|
|
pickit2
Moderator
Hero Member
Offline
Posts: 4657
Thank You
-Given: 832
-Receive: 4300
There is no evidence that I muted SoNsIvRi
|
|
« Reply #50 on: August 26, 2014, 12:13:39 00:13 » |
|
Here are links for Mastercam x8
|
|
|
|
|
Logged
|
Note: I stoped Muteing bad members OK I now put thier account in sleep mode
|
|
|
rad_rob
Inactive
Offline
Posts: 4
Thank You
-Given: 2
-Receive: 0
|
|
« Reply #51 on: September 02, 2014, 10:36:12 22:36 » |
|
Just wanted to post back saying thanks and to verify that X8 did work. I installed it on a Windows 7 machine in my shop and everything works great. I was going to try it tonight on my computer at home and see if it works on Windows 8 or not.
|
|
|
|
|
Logged
|
|
|
|
hosmis
Active Member
Offline
Posts: 173
Thank You
-Given: 334
-Receive: 243
|
|
« Reply #52 on: September 07, 2014, 04:19:18 04:19 » |
|
Mastercam X8 (v17.0.140947.0) English Win64 DVD (by SSQ)
ATTENTION!
Win32, Win XP/Vista 64-bit are not supported!!
DVD content:
Mastercam X8 v17.0.140947.0 Win64
Mastercam X8 Art v17.0.140947.0 Win64
Mastercam X8 Wire Power v17.0.140947.0 Win64
Mastercam X8 CATIA translator v17.0.140947.0 Win64
Mastercam X8 Samples Files v17.0.140947.0 Win64
torrent file..
|
|
|
|
|
Logged
|
|
|
|
Shabbir
Newbie
Offline
Posts: 10
Thank You
-Given: 1
-Receive: 12
|
|
« Reply #53 on: January 27, 2015, 04:14:42 04:14 » |
|
Mastercam X8 HotFix 4 (v17.0.19008.0) Win64 Torrent file https://mega.co.nz/#!5ZU3GRAD!J3sWd1bYTujBdD9kyqtF-ZcGKGBdDRR9GaRcKt9umh0 |
|
|
|
|
Logged
|
|
|
|
Shabbir
Newbie
Offline
Posts: 10
Thank You
-Given: 1
-Receive: 12
|
|
« Reply #54 on: March 12, 2015, 12:40:06 12:40 » |
|
Mastercam X8 HotFix 4 (v17.0.19735.0) Win64 https://mega.co.nz/#!pEtigKob!PGLOZkZuajdWBljuWmeXQTS3drFt6zlKkfoFcj7XrFA Mastercam X8 HotFix 4 (v17.0.19750.10) for SolidWorks 2010-2015 Win64 https://mega.co.nz/#!BQFVABwC!eQCHDl1XyqrFAn6zoSCGmtFAR6EBxqGXfMH1X9BLLEM Thanks |
|
|
|
|
Logged
|
|
|
|
Professor_Bidoof
Newbie
Offline
Posts: 11
Thank You
-Given: 5
-Receive: 7
|
|
« Reply #55 on: May 13, 2015, 02:14:53 14:14 » |
|
Anyone have non-emu code for X8 ? even an older version I can disassemble and compare to original to make my own? Links that had them are down. Thank You
|
|
|
|
|
Logged
|
|
|
|
SB7
Senior Member
Offline
Posts: 346
Thank You
-Given: 290
-Receive: 767
Cry Havoc and let slip the dogs of war
|
|
« Reply #56 on: May 30, 2015, 04:46:19 04:46 » |
|
Mastercam X9 ( Win x64 with SSQ Emu/fix)
Direct Mega link
P_B... I stopped patching MC at MC X7 MU2 (x64). ( I haven't seen any full patches beyond that) That won't really help too much with X8 & X9 though. While the structure is somewhat similar, there have been a few significant changes.
You'll have to patch 500 or so bytes in each of 3 files. Quite tedious, which is why I stopped. ( CRC, EMU check, Blacklist, full HASP patch ie copying all the dongle info into each file , patching user_type,maintenance_time, get_productenablebits etc, etc, redirecting dongle calls, patching various other routines .... ) If you're really interested, I'd start by debugging an EMU setup and see how it behaves.
Not nuclear physics but a lot of time and work. ( my apologies if you're already on that track)
|
|
|
|
« Last Edit: May 30, 2015, 04:49:05 04:49 by SB7 »
|
Logged
|
|
|
|
Bamsalt
Junior Member
Offline
Posts: 98
Thank You
-Given: 359
-Receive: 330
|
|
« Reply #57 on: May 30, 2015, 05:27:42 05:27 » |
|
Mastercam X9 v18.0.11898.10 Eng for SW x64
Just finish the upload to media & mega, I read the above ...
Since our friend SB7 have uploaded to mega, I took out the mega link ....
Attached is the other link.
|
|
|
|
|
Logged
|
|
|
|
Professor_Bidoof
Newbie
Offline
Posts: 11
Thank You
-Given: 5
-Receive: 7
|
|
« Reply #58 on: August 05, 2015, 09:24:25 09:24 » |
|
Mastercam X9 ( Win x64 with SSQ Emu/fix)
Direct Mega link
P_B... I stopped patching MC at MC X7 MU2 (x64). ( I haven't seen any full patches beyond that) That won't really help too much with X8 & X9 though. While the structure is somewhat similar, there have been a few significant changes.
You'll have to patch 500 or so bytes in each of 3 files. Quite tedious, which is why I stopped. ( CRC, EMU check, Blacklist, full HASP patch ie copying all the dongle info into each file , patching user_type,maintenance_time, get_productenablebits etc, etc, redirecting dongle calls, patching various other routines .... ) If you're really interested, I'd start by debugging an EMU setup and see how it behaves.
Not nuclear physics but a lot of time and work. ( my apologies if you're already on that track)
That would explain some of my issues I was having before. Quite a bit of stuff to dredge through without debugging as you said. It has to read some kind of value instead of NOP'ing an instruction or redirection to another sub... Unless one were inclined to really patch a LOT more of it than you say. 500 bytes doesn't sound as horrible as redirecting each routine somewhere else and then writing code within the executable to, for lack of better terms, emulate an emulator. Not to say x7 MU2 was just a couple lines either, however.. I'd be interested in your findings on patching 8/9 if you care to share? |
|
|
|
|
Logged
|
|
|
|
SB7
Senior Member
Offline
Posts: 346
Thank You
-Given: 290
-Receive: 767
Cry Havoc and let slip the dogs of war
|
|
« Reply #59 on: August 06, 2015, 02:13:44 02:13 » |
|
Professor_Bidoof,
Yes, as you've discovered, a few NOP's here an there and patching some jumps aren't going to cut it :-)
MC7 x64 MU2 patching was just shy of 400 bytes. ( that was redirecting dongles calls, building a fake dongle internally , taking care of the self protection , s/n blacklist, emu detection ( so the users that have previously run emu's .. and have stuff in their registry , don't set off the emu detection) maintenance time,etc,etc. The only reason a full patch was possible was their poor HASP implementation. Properly done, it should be extremely difficult to remove the dongle. Not impossible, but close.
Yes, it has to read a specific dongle value ( that determines many things like : sim s/n , sim type, ( HASP,NETHASP,WIBU .CODE METER etc, ) Dongle type ( EDU, DEALER etc)
what level + ver is paid for/ applicable for each function you use. ( lathe_ver (ie 0x190) ,lathe_level ie 0x06) ,router_ver,router_level wire_ver , wire_level, Art.... etc all the way to CATIA ( 0xFF) stuff .. the list is long and not all functions have the same highest level or version)
Millturn .. well I've yet to see valid Milllturn setup POST Module as it's normally encrypted with info on a specific users dongle.
The last I checked, the protection was now spread across 4 different files and will require significant patching, therefore you'll need roughly 1600 bytes to patch... that's very rough as I was only beginning to add the third party stuff when life and it's time constraints simply caught up to me.
As a start, you'll have to identify the dongle read function ( force positive dongle read result ) , find the function that transposes what it reads to internal variables/address so that you can identify what address corresponds with what function ( lathe_version 0x491234, lathe_level 0x491256 etc)
From there you build a dongle table overwriting the transposition routine to load what you want, then redirect the program ( multiple locations as that data tends to get over written dependent on program flow. I basically just forced a call to my routine whenever the program wanted to read the sim_type/user_type/sim .. which covered paractically every function check).
I used an EMU to get the program to shows me what values in the dongle dump corresponded to each function and then what it was expecting. Thank god they hadn't obfuscated the function names or that would've made life significantly more difficult.
There where other things to take care of, like productenable bits ..... hidden checks.. is there actually dongle there , have I been modified , is there an EMU running.(services\emulator\HASP) Anti - Anti EMU check patches ( NEUHASP & NUWHASP reg checks) , Is the serial number pirated/dongle reported stolen, etc. ,
The newer versions have added other things that I've yet to delve into , but that will become your job. (If I recall, Toolmanager was now protected with codemeter... that's presents a whole new set of challenges)
A lot of the same structure is still there, interesting comments from the authors too like " Well I came down with my Martin Blazin...'" LOL or my fav.. "Let's admit the bastards beat us " mmmh I do hope they were referring to us LOL (I might add that that's an interesting sub , by the way....) , but they 've also added more functions ( Productivity Plus) that I haven't looked at although I may have taken care of that forcing it to think it had a Dealer dongle attached... I can't honestly remember )
I'm not trying to being evasive, I just don't have the time anymore to investigate what needs to be patched. You can can of course, use the patched MC 7 as a starting point..
Have fun :-)
Good Luck
|
|
|
|
« Last Edit: August 06, 2015, 05:42:39 17:42 by SB7 »
|
Logged
|
|
|
|
Professor_Bidoof
Newbie
Offline
Posts: 11
Thank You
-Given: 5
-Receive: 7
|
|
« Reply #60 on: September 04, 2015, 09:00:52 09:00 » |
|
Mastercam X9 Update 1
Didn't see it anywhere else, had to do it for myself anyway lol.
Sorry SB7 i haven't had much time to reply with work. I took notes from your posts and very much so kept it serious. I really haven't had enough time to do a emu bypass so this is what i'm sharing. haven't seen ssqx9u1 yet.
|
|
|
|
|
Logged
|
|
|
|
SB7
Senior Member
Offline
Posts: 346
Thank You
-Given: 290
-Receive: 767
Cry Havoc and let slip the dogs of war
|
|
« Reply #61 on: September 04, 2015, 01:47:17 13:47 » |
|
Hi P_B,
You don't need to apologize to me, this is your journey of self enlightenment, not mine. :-) What I provided probably isn't that helpful, but its a start.
FWIW SSQ posted 9U1 ( regular and SW version) a week ago or so on a "famous" russian torrent site.
Thanks for posting your work.
Cheers
|
|
|
|
|
Logged
|
|
|
|
|
