Sonsivri
 
Home Contact Us Help Search GoogleTagged Donations Login Register
*
Welcome, Guest. Please login or register.
Did you miss your activation email? 		October 03, 2023, 12:26:52 12:26


Login with username, password and session length


Sonsivri > Electronics > General Electronics (Moderators: o2, pickit2) > schematics/pinout power supply needed
Pages: [1]
« previous next »
Print
Author Topic: schematics/pinout power supply needed  (Read 3897 times)
0 Members and 1 Guest are viewing this topic.
sfiga69
Active Member
***
Offline Offline

Posts: 183

Thank You
-Given: 184
-Receive: 158


In the order is preserved, in the mess is created.
« on: October 01, 2017, 04:19:50 16:19 »
I would use this 12V 460W FSA021-30g power supply server for a 3d printer.
they are looking for a description of pinout  or a datasheet / schematics
Can someone help me?
thanks
Logged
pickit2
Moderator
Hero Member
*****
Offline Offline

Posts: 4604

Thank You
-Given: 818
-Receive: 3975


There is no evidence that I muted SoNsIvRi
« Reply #1 on: October 01, 2017, 06:39:48 18:39 »
looking at Model Number they are for IBM servers, specs say 12.3 V at 55A & 5V at 0.2A
they will have a Power Good signal & other control inputs.
Logged
Note: I stoped Muteing bad members OK I now put thier account in sleep mode
PICker
Active Member
***
Offline Offline

Posts: 162

Thank You
-Given: 207
-Receive: 109
« Reply #2 on: October 01, 2017, 08:23:32 20:23 »
It is very difficulto to find the pinout of the IBM Power Supply FSA021-30g.
Have a look to other similar devices like FS9032 or FS7023.
In this forum they try to adapt a power supply; it is possible you can ask them about pinout:
https://www.rcgroups.com/forums/showthread.php?1292514-How-to-convert-Server-Power-Supplies/page10
https://www.rcgroups.com/forums/showthread.php?1359177-Converting-PSU-AcBel-model-FS7023-and-FS9032
Logged
sfiga69
Active Member
***
Offline Offline

Posts: 183

Thank You
-Given: 184
-Receive: 158


In the order is preserved, in the mess is created.
« Reply #3 on: October 01, 2017, 08:33:03 20:33 »
exact.
is a power supply that supplies 38A continuous at 12V.
there should be 2 or 3 pins that are ground-fed to start the power supply.
are this ones I'm looking for.

@PICker
FS9032/FS7023 is very very similar.
tomorrow I test.
« Last Edit: October 01, 2017, 08:41:39 20:41 by sfiga69 » Logged
sfiga69
Active Member
***
Offline Offline

Posts: 183

Thank You
-Given: 184
-Receive: 158


In the order is preserved, in the mess is created.
« Reply #4 on: October 02, 2017, 08:54:17 20:54 »
Yesss it work.

This server is equipped whit 2 type of psu:
 460W  38A at 12.2V   model FSA021-30G
 675W  55A at 12.2V   model FS7023/FS9032-30G

With same pinout.
From left
at top first 2 pin shorted  power supply startup, fan go max then after a few seconds go min.
a short from pin 1 at top and pin 8 at bottom fan go max, if remove short after a few seconds go min.
Logged
Pages: [1]
Print
« previous next »
Jump to:  


DISCLAIMER
WE DONT HOST ANY ILLEGAL FILES ON THE SERVER
USE CONTACT US TO REPORT ILLEGAL FILES
ADMINISTRATORS CANNOT BE HELD RESPONSIBLE FOR USERS POSTS AND LINKS

... Copyright © 2003-2999 Sonsivri.to ...
 Powered by SMF 1.1.18 | SMF © 2006-2009, Simple Machines LLC | HarzeM Dilber MC