CCS and Proteus with Microchip 14 Bits and Programs > 2K

[lucasdark]

I am using Pic 16 Family (14 bits), CCS C compiler and Proteus for the simulation.



I am  using in Proteus the program file .COF generated by CCS PCM C Compiler.

Always that the compiled program is less than 2K (<0x07FF) I can get correct simulation in both Stepping a Execute modes from Proteus.



But when the Program exceed 2K (>0x07FF) I can’t simulate in Stepping mode (Using F11)



Somebody  can help me to find the problem?



I would appreciate your help.



Thank you.



I make a test using the example file included in the CCS C Compiler “EX_VOICE.C�.



I compiled it using Microchip 14 bits, I got EX_VOICE.cof file and I ran it using Proteus, but it didn’t work in Stepping mode.

[tavioman]

Hi!
I'm using a program larger than 2K and all look fine.
But the MCu that I use is 18F2320...

[lucasdark]

Tavioman,
 
Yes, I Know.
 
This, just, happen with 16X Family (14 bit Core).
 
Thanks

[vsmvdd]

its very obvious your using a cracked out version of proteus or ccs
 
 
sounds like a protection in the proteus loader.dll  or the ccs compiler binaries