Sensirion’s SHT75 Interfacing with Micro-Controller!!

[xpress_embedo]

Sensirion’s SHT7x Sensor is a Temperature and Humidity Sensor, it is a digital sensor working on a 2-wire protocol but not on I2C Protocol.
Below is the project attached to extract Temperature, Relative Humidity and then based on the values of Relative Humidity and Temperature, True Humidity is Calculated.

Proteus Simulation file is Attached, and this is tested on Real Hardware also.

[xpress_embedo]

I had shared this project earlier but found one thing strange, i am not getting accurate measurements.

Means when i am having Relative Humidity of 80% in Proteus then my Calculation in Controller results 82.9%

Similarly at 10% Relative Humidity my Calculation leads to 14.7%

Can anyone tell me why it is so.
I am using integer variables to optimize my code so that it consumes less memory, but when i saw the measurement is not accurate, i tried with all floats and still getting the almost same result.

[edeca]

Hi, I don't have a long time to analyse your code right now but you could compare it to mine, which is available at: https://github.com/edeca/Electronics/blob/master/Include/sht.c

The documentation is at: http://edeca.net/electronics/library-docs/html/sht_8h.html

If you still have errors after comparing then I can look in more detail.