[Required]CIMCO Software Suite

[Wizpic]

Does anybody have a copy of this. I did search the forum found to copies of it but the links are dead beacuase there old

Could some one please re-upload

wizpic

[pickit2]

version 5.6.73
http://www.fileserve.com/file/Fa4rucp/CIMCO.Software.Suite.v5.60.73-BEAN.rar

I see you stole my bus-pass picture as your avatar

[Wizpic]

No that's me on a good day but I've got to say I did think off you when I found it   

[yahoo]

For the latest version 6.10.25 fix does not exist yet but if you need the latest cnc editor only here are the steps to fix it by yourself(the safest way to do it):

1. Download the original installer from cimco: http://www.cimco.com/products/download/CIMCO_61025.exe
2. Install it.
3. Using any hex editor replace the following in the file cimcodnc.exe

file offset:      original content:      replace with:
0xCB85          0F 87                     90 E9
0xCC47          0F 85 70 FF FF FF    90 90 90 90 90 90
0xCC54          0F 8D 63 FF FF FF    90 90 90 90 90 90
0xCC69          0F 84 4E FF FF FF    90 90 90 90 90 90

4. Do the same for the file cimcoedit.exe

file offset:      original content:      replace with:
0x8FDF5         0F 87                     90 E9
0x8FEB7         0F 85 70 FF FF FF    90 90 90 90 90 90
0x8FEC4         0F 8D 63 FF FF FF    90 90 90 90 90 90
0x8FED9         0F 84 4E FF FF FF    90 90 90 90 90 90

(optional:)
0x215BBC       DEMO Version 0x00   Sonsivri 0x00

5. Enjoy several more years of evaluation of this product.

6. If you really like it or need it for commercial use please BUY it!

Happy Holidays!

[hosmis]

for @wizpic :
Cimco V6 01.07 Full

DNC Max Server, DNC Max client, MDC Max Client, Cimco Edit, Cimco Data Base Server, Cimco License Server, Pocket PC Client.

x86/x64

Edit :

https://skydrive.live.com/?cid=6c9b337a08661f4d&id=6C9B337A08661F4D%21110

or :

http://www.multiupload.com/HJZDTEVZ3S

[Wizpic]

for @wizpic :
Cimco V6 01.07 Full

DNC Max Server, DNC Max client, MDC Max Client, Cimco Edit, Cimco Data Base Server, Cimco License Server, Pocket PC Client.

x86/x64


https://skydrive.live.com/redir.aspx?cid=6c9b337a08661f4d&resid=6C9B337A08661F4D!110&parid=root

It say's this item does not exist not sure what happened there

[hosmis]

http://www.multiupload.com/HJZDTEVZ3S

[Wizpic]

I've just had quick play with it and wow what a program it is I'm very impressed with.
I've sorted out how to mill a PCB Just need to learn now to draw what I need to, Like cutting out LCD hole on a plastic case and convert it to G-code.
I know how to draw but it's converting it to dxf then convert to G-code but just need to learn how to set it up and cut the depth of it and stuff like that

Good work Hosmis and the others who help too!

wizpic

[hosmis]

I do not know English language very well sorry.
 my method :

Isis > circuit
Ares > pcb > output - gerber/excellon out file
pcb power tool > gerber to eagle script converter
Eagle > edit > ulp > pcb to gcode (for mach3)
Cimco > gcode test
Mach3 cnc controler > load gcode(nc,tap,txt,...)
Hapy end...

---------

for dxf to gcode :

http://www.christian-kohloeffel.homepage.t-online.de/dxf2gocde.html

[Wizpic]

Does the eagle pcb converter allow you to use polygon's in the gerber and the g-code convers ok with a polygon. I know cppper cam can't handle the polygon's

Just downloaded pcb power converter to have a play with,
wizpic

[hosmis]

Powertool...

http://www.multiupload.com/3ZJ7P3R60P


pcb to gcode (ulp)

http://pcbgcode.org/list.php?12

[outsider]

What's the password for the skydrive link a few posts above?

[hosmis]

pw :  feyzalstyle

[cncbasher]

anyone have the origional download from cimco for version 61025  (cimco_61025.exe)
they seem to have removed it

[yahoo]

Try using the latest version 6.10.47 downloads:

http://www.cimco.com/products/download/CIMCOEdit6_61047.exe  (ONLY THE EDITOR INSTALLATION)
or
http://www.cimco.com/products/download/CIMCO_61047.exe  (EVERYTHING)

Follow the same procedure above replacing steps 3&4 with:

3. Using any hex editor replace the following in the file cimcodnc.exe

file offset:      original content:      replace with:
0xCB85          0F 87                     90 E9
0xCC47          0F 85 70 FF FF FF    90 90 90 90 90 90
0xCC54          0F 8D 63 FF FF FF    90 90 90 90 90 90
0xCC69          0F 84 4E FF FF FF    90 90 90 90 90 90

NOTE: The fix for cimcodnc.exe is exactly on the same place like in version 6.10.25 so it is not a mistake that I provide the same information for step 3!

4. Do the same for the file cimcoedit.exe

file offset:      original content:      replace with:
0x901C5         0F 87                     90 E9
0x90287         0F 85 70 FF FF FF    90 90 90 90 90 90
0x90294         0F 8D 63 FF FF FF    90 90 90 90 90 90
0x902A9         0F 84 4E FF FF FF    90 90 90 90 90 90

(optional:)
0x215C14       DEMO Version 0x00   Sonsivri 0x00

I'm still using CimcoEdit5 (5.60.80) and I don't see any reason to upgrade to the latest versions.

[Bamsalt]

Latest CIMCO v6.20.25 ....

www.cimco.com/products/download/CIMCO_62025.exe

[hosmis]

From @mambablack , thank you...

for6.20.25 :

http://rapidshare.com/files/3593579659/C%C3%BCmc%C3%B6%20k%C3%BCre%C4%9F.rar

[Bamsalt]

Unable to get into rapidshare ... Download permission denied by uploader. (0b67c2f5) ...  how about upload to other site, thanks !

[gmua]

I modified CIMCO Edit version 6.20.36 according to yahoo's instructions:

CimcoDNC.exe

file offset:      original content:      replace with:
0xCBB5          0F 87                     90 E9
0xCC77          0F 85 70 FF FF FF    90 90 90 90 90 90
0xCC84          0F 8D 63 FF FF FF    90 90 90 90 90 90
0xCC99          0F 84 4E FF FF FF    90 90 90 90 90 90

CIMCOEdit.exe

file offset:      original content:      replace with:
0x90275         0F 87                     90 E9
0x90337         0F 85 70 FF FF FF    90 90 90 90 90 90
0x90344         0F 8D 63 FF FF FF    90 90 90 90 90 90
0x90359         0F 84 4E FF FF FF    90 90 90 90 90 90

(optional:)
0x215C5C       DEMO Version 0x00   Sonsivri.com 0x00


If someone is interested, I am sharing both files.

Thanks yahoo, all the credit is yours...

[mick]

direct link for 62036 version

www.cimco.com/products/download/CIMCO_62036.exe

[hosmis]

62039
http://www.cimco.com/products/download/CIMCO_62039.exe

kürek
http://rapidshare.com/files/2802298906/62%C5%9E39.rar

Posted on: September 01, 2013, 09:49:18 21:49 - Automerged
ÇimçoEdıt70004

[b555b]

According to yahoo's instructions, I have tried to patch CIMCOEdit.exe version 7.0.25 and it seems to work nicely.
Use your preferred binary editor (I have used PSPad in binary mode) and modify these bytes:

file offset:    original content:    replace with:
0x94B95         0F 87                90 E9
0x94C57         0F 85 70 FF FF FF    90 90 90 90 90 90
0x94C64         0F 8D 63 FF FF FF    90 90 90 90 90 90
0x94C79         0F 84 4E FF FF FF    90 90 90 90 90 90

I haven't tried to modify CimcoDNE.exe as I'm only using the editor (and its very nice gcode simulator), but the procedure described by yahoo shall also work on that file.

Main improvement in v7, the simulator has now a 'solid animation' mode, i.e. now you can step in the gcode and see the result of each step on the solid result (in previous version, the solid result always displayed the final result of the complete job and only the tool path was animated while stepping or running).

Download link for original version 7.0.25 : http://www.cimco.com/products/download/CIMCO_70025.exe

Of all the GCode simulators that I have tried so far, CIMCO is one of the easiest to use with very good results. For example a lot of simulators fail on helical moves, but no problem with CIMCO (and yes, I use helical moves in my programs...)

[b555b]

I have written a little tool that will allow to apply the solution described by yahoo to any compatible version of CIMCO.
After having installed CIMCO, run my little tool. Select the CIMCOEdit.exe and CimcoDNE.exe executables in the directory where you have installed CIMCO and it will patch them for you.
Tested with 7.0.25 and 6.20.36; shall work with any compatible future version.

All the credit goes to yahoo, I have just automated his method. I don't know how his method works, but I know that it works.

Note that after applying yahoo's method, when your run CIMCO after patching, you will still see a text at the bottom of its main window saying that it is a demo, as well as a text in the about dialog saying that the demo has expired. Don't worry, even with these messages you have now a fully functional CIMCO Edit without expiry date.

EDIT: download link no more valid, go to reply #29 for an updated one.

[Bamsalt]

I have tested this "little tool" with version 7.00.26 ... it works.

Download link for the original version 7.0.26 : http://www.cimco.com/products/download/CIMCO_70026.exe

[xor]

Pls can anybody reupp this little tool (it seems to be offline)

Patch + install

[hosmis]

new
7.01.25

[Professor_Bidoof]

The newest version of CIMCO to date that I post this is 7.50.13

The link from CIMCO is: http://www.cimco.com/products/download/CIMCO_75013.exe

This post applies to the following parts of it:

CimcoDNC.exe (Sub is F3C0)
CIMCOEdit.exe (Sub is BC8B0)
DNCAdmin.exe (Sub is 65B10)
DNCMax.exe (Sub is 538E0)
DNCMaxCtrl.exe (Sub is 108D0)
DNCMaxServiceManager.exe (Sub is 18DF0)


I have inspected all of the above programs in Ida Pro 6.5 and a few hex editors to show they use the same process. Thanks to the previous posts and especially "yahoo"! I appreciate it!

All of the above sub addresses (and this post) apply to version 7.50.13.

Example from CIMCOEdit-

CIMCOEdit.exe- {Assembly code instruction explanation}
Original-
JA LOC_BC9AE  ADDRESS: SUB_BC8B0+45 (BC8F5)
JNZ LOC_BC92D ADDRESS: SUB_BC8B0+107 (BC9B7)
JGE LOC_BC92D ADDRESS: SUB_BC8B0+114 (BC9C4)
JZ  LOC_BC92D ADDRESS: SUB_BC8B0+129 (BC9D9)
Modified-
BC8F5: NOP
BC8F6: JMP BC9AE
BC9B7: NOP NOP NOP NOP NOP NOP
BC9C4: NOP NOP NOP NOP NOP NOP
BC9D9: NOP NOP NOP NOP NOP NOP

They all reference the same ASM code and the same sub. You can take the sub address and add 45, 107, 114, or 129 (IN HEX, NOT DECIMAL) and you will get the address of the value you need to change. It looks like all 6 of those files use the same code, and can be modified the same way. I didn't do much research info the ASCII for the DEMO Version name but you could just search that in the file if it changes address anyway, it only has one location.

I attached a more detailed text file.

Enjoy!

[Professor_Bidoof]

Newest version as of 5/10/15:

http://www.cimco.com/products/download/CIMCO_75501.exe

Or for just the Editor:

http://www.cimco.com/products/download/CIMCOEdit_75501.exe


For CIMCOEdit.exe ONLY:

CIMCO EDIT V7.5 (75501)

ORIGINAL BITS-


0XBEF35: 0F 87
0XBEFF7: 0F 85 70 FF FF FF
0XBF004: 0F 8D 63 FF FF FF
0XBF019: 0F 84 4E FF FF FF

MODIFIED BITS-

0XBEF35: 90 E9
0XBEFF7: 90 90 90 90 90 90
0XBF004: 90 90 90 90 90 90
0XBF019: 90 90 90 90 90 90

If you need DNC, search the other 5 exe files for these values. They're there with the same values and offsets. This hex edit will give you the CIMCOEdit.exe , which is most of what anyone uses.

[Professor_Bidoof]

CIMCOEdit 7.55.24, newest as of date.


ORIGINAL BITS-


0XC0315: 0F 87
0Xc03D7: 0F 85 70 FF FF FF
0Xc03E4: 0F 8D 63 FF FF FF
0XC03F9: 0F 84 4E FF FF FF

MODIFIED BITS-

0XC0315: 90 E9
0XC03D7: 90 90 90 90 90 90
0XC03E4: 90 90 90 90 90 90
0XC03F9: 90 90 90 90 90 90



EDIT: Is it possible for a moderator to move this thread to the Graphics and CAD forum? It may be better suited there seeing as it is a CAM program and CNC editor. Thank you.

[b555b]

By the way, my little tool posted beginning of last year (post #22) is still able to find automatically the offsets that need to be patched and so is able to patch the latest version of CIMCOEdit. It will probably also work with the next versions as they still keep the same verification routines from one version to the other. So if you don't like to play with a binary editor, feel free to use it to patch your latest downloaded evaluation version of CIMCOEdit.
As the link in my post of last year is dead, a new link to download the little tool is attached.

[Professor_Bidoof]

By the way, my little tool posted beginning of last year (post #22) is still able to find automatically the offsets that need to be patched and so is able to patch the latest version of CIMCOEdit. It will probably also work with the next versions as they still keep the same verification routines from one version to the other. So if you don't like to play with a binary editor, feel free to use it to patch your latest downloaded evaluation version of CIMCOEdit.
As the link in my post of last year is dead, a new link to download the little tool is attached.

Thanks b555b, I wasn't trying to put you down or anything, I actually had forgot about that, I was just contributing with what i had. I don't think i could DL it when i first saw it for whatever reason, got it this time, haven't ran it yet but the code looks like it would work until they change something major. I like using the hex editor and checking it out when i change the bits, find the jmp at least half of the times i do it (hobbies, geez lol).

Thank you for the great working and clean resource! Thanked.

-Professor_Bidoof

[cncbasher]

Professor:
i notice the last link has been discontinued also , for your information

[hosmis]

Cimco Edit 8.00.00 download link

no patcher

[hosmis]

Cim80028 + ( 2147433947 day )

[Professor_Bidoof]

Cim80028 + ( 2147433947 day )

Link for the med is down already. *sigh* i was excited too, havent seen one of these out yet (nor have i had much time to disassemble it lately)

Thank you!

[hosmis]

links working

[Professor_Bidoof]

links working

Indeed it is now sir, thank you for correcting me, it must have been a temporary issue.