Amplifier for electric guitar

[piclower]

Hi, Thanks all for your colaboration for these project, I would like to make an amplifier for electric  guitar.

[kittythai]

http://www.ampwares.com/fender.asp
http://www.mif.pg.gda.pl/homepages/tom/schematics.htm

 

[pickit2]

Just note on safety make sure you use the proper tranformer if your using mains voltage.

[Heretic78]

http://www.ax84.com/ "The Cooperative Tube Amp Project" will be worth a look also, lots of tech docs, forums etc.

[hate]

http://sound.westhost.com/project27.htm

I made and tested this design and it works without a problem. But there is a little noise caused by the mains supply, I suggest using bigger filter capacitors in the power supply with smaller ones in parallel. Like 10x1000uF in parallel for both outputs maybe.

Regards...

[rmb1099]

http://sound.westhost.com/project27.htm
I suggest using bigger filter capacitors in the power supply with smaller ones in parallel. Like 10x1000uF in parallel for both outputs maybe.

Regards...

As your suggestion is very simple, do you do that yourself?
i want to be sure that the problem is exactly what you think.

[hate]

Nop I didn't try it cuz it's too late for me as I didn't install any sockets, just plain soldering for every connection. But my screening and casing wasn't that good so I doubt if I can ever realise the difference if I tried that. If u stick to what's written on the web site and make the improvement I said, u shouldn't have much noise on the output but I can't guarantee anything, ur choice. These are just my thoughts and experiences...

Regards...