Jlink V7 FULL

[shaoshunda]

Jlink V7 Schematic

Posted on: March 15, 2009, 12:37:43 12:37 - Automerged
Jlink FirmWare v7 FULL

Posted on: March 15, 2009, 12:46:09 12:46 - Automerged
 

[ambo]

Would this jlink also work with Keil RealView MDK?

[jlian168]

Do you have jLink source code?

[reksbg]

shaoshunda, do you have the schematic in Protel/Altium file format?

[designer]

full documents for jlink7

[samir]

full documents for jlink7

full documents for jlink7

thanx but can you tell me this document are for which soft ? .e.g orcad protel etc)

[petarp]

Hi, desginer. What is the position of jumpers J1 to J11? Thanks.
Hi, samir. Files are for protel.

[thavali]

hi all,

when i connect j-link to my ARM7 board, the error orrcured as following (see image):

[GeneralMadDog]

Hi, desginer. What is the position of jumpers J1 to J11? Thanks.

Hi!

I have the same question. Does anybody know the meaning/correct setting of the jumpers J1 to J11?

Regards,
MadDog

[thavali]

hi all,
The J-link v7 board was made successfully, jumpers J1 , J11 is not necessary.
this is 2 board was made base in J-Link v7 above:


Posted on: June 03, 2009, 10:13:53 10:13 - Automerged
hi all,
The J-link v7 board was made successfully, jumpers J1 , J11 is not necessary.
this is 2 board was made base in J-Link v7 above:

form TME (Vietnam)




from Pnlab (Vietnam)




Posted on: June 03, 2009, 10:19:36 10:19 - Automerged
http://pnlabvn.com/pnlab/Products/Programmer/Jlink/08.jpg

Posted on: June 03, 2009, 10:24:24 10:24 - Automerged
debug with Keil:

[Make_Pic]

Is there a possibility to modify this JLink for work with the ColdFire?

http://www.segger.com/jlink_cf.html

[nooknikz]

No, It work only ARM7, ARM9, ARM11 and Cortex-M3

http://www.micro4you.com

[Kompir]

Hi there,

Would you be so kind to tell how the AT91SAM7S64 must be programmed with the corresponding firmware.
As far as I know SAM-BA must be used. Is this programming affected by the position of the RUSB jumper (J11)?

Thanks!!!
Regards

[spasbyspas]

Hello! This topic subsided a little and I decided to renew it!
I made a debugger from materials in the subject and get!
Shematic is in "shaoshunda" post, the PCB is of "designer" ver. - with modifications(easy to made).
I made three and now work fine in both modes - jtag and SWD!
Enjoy!

http://ifile.it/owx1n7v/JLINK_7_NEW.rar

[Sympatico]

Hi nooknikz just wondering if you work for micro4you and do you shop to North America? I am interested in the N-Link.

Also, spasbyspas can you please provide some instructions on how to program the CPU? Where can I buy one that is assembled and working.

[electronplay]

Hi

I make this board but now, how can i have program the atmel ARM ?
By USB  ?


Thanks 

[Top]

Hi

I make this board but now, how can i have program the atmel ARM ?
By USB  ?


Thanks 

Use Atmel SAM-BA to program chip by USB.

AT91 In-system Programmer (ISP)
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3883

SAM-BA Notes V1.0 - May 2005
http://www.olimex.com/dev/SAM-BA%20Notes.htm

[th_sak]

hi all,
The J-link v7 board was made successfully, jumpers J1 , J11 is not necessary.
this is 2 board was made base in J-Link v7 above:


Posted on: June 03, 2009, 10:13:53 10:13 - Automerged
hi all,
The J-link v7 board was made successfully, jumpers J1 , J11 is not necessary.
this is 2 board was made base in J-Link v7 above:
http://i199.photobucket.com/albums/aa186/thminh/J-LINKV7.jpg
form TME (Vietnam)

Does anyone know where can I buy J-Link by TME in reasonable price?
Thank's in advance.

[thavali]

price of J-link at vietnam is 31 $, not including shipping charge.  you can contact to Mr Hai, mail: [email protected]

J-Link from Pnlab:
http://www.pnlabvn.com/pnlab/index.php?page=shop.product_details&category_id=44&flypage=shop.flypage&product_id=274&option=com_virtuemart&Itemid=29

or from TME with price is 33$, not including shipping charge, contact : Mr Minh, mail: [email protected]

http://tme.com.vn/Product.aspx?id=541&CateId=147

talk thavali, a member of dientuvietnam.net nominate.

where are you living ?

[Sympatico]

price of J-link at vietnam is 31 $, not including shipping charge.  you can contact to Mr Hai, mail: [email protected]

J-Link from Pnlab:
http://www.pnlabvn.com/pnlab/index.php?page=shop.product_details&category_id=44&flypage=shop.flypage&product_id=274&option=com_virtuemart&Itemid=29

or from TME with price is 33$, not including shipping charge, contact : Mr Minh, mail: [email protected]

http://tme.com.vn/Product.aspx?id=541&CateId=147

talk thavali, a member of dientuvietnam.net nominate.

where are you living ?

Thanks for this info Thavali. I am also very interested in buying a jLink. Do both ship to Canada? can you please help as I am unable to speak the language.

[th_sak]

Thanks for this info Thavali. I am also very interested in buying a jLink. Do both ship to Canada? can you please help as I am unable to speak the language.

They speak english. I asked them in Pnlab if they ship to Europe and told me that the cost of Jlink is 26 euro while the shipping cost is 31 euro!

[reksbg]

Does somebody have the full package (pcb, firmware etc.) for this ver 8.3 of JLink?

[petarp]

Hi. Any body can translate JLink v8.pdf?

Thanks.

[reksbg]

http://translate.google.com/?ie=UTF-8&hl=en&tab=wT#
 

[petarp]

Yes I know google translate, but I can' t copy all characters to translate from pdf(there is repeated and missing charcters after copy).

Best Regards.

[reksbg]

Does somebody have the full package (pcb, firmware etc.) for this ver 8.3 of JLink?

Here is everything I've found about v8 (I'm not sure about the last one  ):
http://rapidshare.com/files/353987965/35738620J-V8.rar
http://rapidshare.com/files/353987966/95302948J-Link_V8_FirmWare.rar
http://rapidshare.com/files/353987967/115157682v8a.rar

[thavali]

Here is everything I've found about v8 (I'm not sure about the last one  ):
http://rapidshare.com/files/353987965/35738620J-V8.rar
http://rapidshare.com/files/353987966/95302948J-Link_V8_FirmWare.rar
http://rapidshare.com/files/353987967/115157682v8a.rar

have anyone tested for V.8 yet ?

I tested JLink v7 with newest firmware V4.14i (download from SEGGER http://www.segger.com/cms/jlink-software.html ).
Firmware updated OK.
testing for uploading/downloading RAM/FLASH is OK.

[thavali]

JLink v8

firmware and schematic, use Altium Degsigner to open schematic file. this is a clone version of china.
Not tested.

[Mega32]

Has anyone tried to update / program a (Blank) V8 Hardware ??

I have just tried the binary firmware , and it comes up as a J-link , and is working.
But i fail on upgrading the unit , with a newer software.

I might have no bootloader (i think) , or fuse problems.

Does anyone have hints on getting the bootloader or other help ??

Any suggestions

Mega32

[Top]

Has anyone tried to update / program a (Blank) V8 Hardware ??

I have just tried the binary firmware , and it comes up as a J-link , and is working.
But i fail on upgrading the unit , with a newer software.

I might have no bootloader (i think) , or fuse problems.

Does anyone have hints on getting the bootloader or other help ??

Don't lock the sectors when you are done programming. See: http://www.sonsivri.com/forum/index.php?topic=28574.0; this applies to v7 & v8 too.

[Mega32]

Don't lock the sectors when you are done programming. See: http://www.sonsivri.com/forum/index.php?topic=28574.0; this applies to v7 & v8 too.

The above wasn't the solution to my problem

My solution was the V8.bin file from here , now it also accept updates
http://forum.micro4you.com/arm-development-tools/problem-wir-%27arm-jtag-usb%27-arm-006-3-programmer-dead/msg128/#msg128

Witch apparently is a firmware with bootloader in it.

Thanx n....n.z  

Btw : remember to set secutity and brownout detection fuses


Mega32

[scrts]

Maybe someone have a good and tested JLink PCB?

[phasetek]

I think something happened to sonsivri's file storage, can someone check the files that are at the start of this thread, they all seem to be corrupted.  Have seen this on a few different files/threads already.

[thavali]

check here: http://www.sonsivri.to/forum/index.php?topic=41726

[Mega32]

Got a Jlink v7 Clone from a friend (says Jlink v7 on pcb) , only has a green led and

It's got a sam7s64 + 2 x TI "NH245" driver chips.

Does anyone know what "updated" firmware to load on this ?
I mean the Serial & GDBFull fix ...

Would it work with a v8 firmware ??

Or should i make sure to get a v7 firmware (bootloader)

Add : I loaded the V7 firmware

Mega32