AVRISP-910 USB Programmer

[phucthinhel]

I post here ISP910 USB . this file drew by Orcad Software .
My product site which wrote vietnammese lang : http://phucthinhel.googlepages.com

The programmed can program chips :

AT89S53  12   256 32
AT89S8252  8 2 Kb 256 32
AT90S2313         
AT90S8515         
ATtiny26         
ATtiny45         
ATtiny2313 2       
ATmega48 4       
ATmega8 8       
ATmega8515 8       
ATmega8535 8       
ATmega16 16       
ATmega32 36       
ATmega64  64       
ATmega128 128 4 kb 4kb   
AT90CAN128 

[petarp]

Hi. Where is Firmware for ATMEAG8?

[avrPassion]

The pcb file extention is MAX ! what program do I need to open it? is it possible for you to post the picture of the schematic file.
there is also an AVRISP-910 USB Programmer on
http://www.serasidis.gr/circuits/usbAvrProg/usbAvrProg.htm
i have checked it before and it works.

[kolin]

Nice work, but almost nothing useful for us. There are lot of more complete designs. I'm using usbasp for long time with great succes
For opening MAX file you need "OrCAD INC., Layout Database V9.20". It's the first thing you see when you open file with viewer.
this is probably source of design
http://pinokio3000.narod.ru/my_designs/AVR910_USB_Programmer_eng.htm

[Codeman]

AVRISP MKII (original from ATMEL) costs about 30 Euro and programs all AVR's. I don't think is a good idea to make one ourselfs...

Just my 2 cents...

[kolin]

AVRISP MKII (original from ATMEL) costs about 30 Euro and programs all AVR's. I don't think is a good idea to make one ourselfs...
Just my 2 cents...

Well USBasp programs all AVR and it cost me less than 4euro. This is almost same thing.

[elcielo]

using USB interface + Plastic Hood

DB09 Dual Connector Hood (http://www.connectworld.net/cgi-bin/ccc/DB09HDUAL)
 or
DB09 Female to RJ4508 Adapter Gray (http://www.iec-usa.com/cgi-bin/iec/DB09F-RJ4508)

Who have it ?

[riponsp]

Hello to all.
This is really a nice project. I already make it. It work fine. Now I have a problem. In our market the ATmega8 chip is un available, I can collect ATmega8L chip. ATmega8L doesn't support more than 8MHz clock. Now what should I do. I want to make this Programmer by ATmega8L.
Thanx.

[microkid]

Hello to all.
This is really a nice project. I already make it. It work fine. Now I have a problem. In our market the ATmega8 chip is un available, I can collect ATmega8L chip. ATmega8L doesn't support more than 8MHz clock. Now what should I do. I want to make this Programmer by ATmega8L.
Thanx.

You can use it. I had tried it upto 12MHz. 8L is working fine

[pushycat]

ATmega8L doesn't support more than 8MHz clock.

I am using ATmega8L 8PU chip in my personal USBasp and is working fine with 12 Mhz crystal.

[phucthinhel]

Don't worry about 12mhz crystal . I used atmega8L master .