|
Title: Dummy Load Post by: WeSo on April 30, 2017, 03:18:12 15:18 Hello,
It's my first post and I think that one of the best ways to indroduce myself is sharing. I will try to share and learn from each other. This project is simlple, the idea was to do a dummy load for test other circuits. I used a dsPIC30F2010 as controller of it, sensing the current with an external current monitor with analog exit. Besides, it has temperature control for protect the MOSFET. The limits are up to 30V and 3A. You can see all the files here: https://github.com/JDGon/DummyLoad/ A picture: (http://i.imgur.com/d78wDGg.jpg) I guess that you like it. Any suggestion is wellcome! Title: Re: Dummy Load Post by: Gallymimu on April 30, 2017, 04:33:13 16:33 how fast can it respond to source transients? i.e. how fast/stable is the control loop?
Title: Re: Dummy Load Post by: WeSo on April 30, 2017, 04:54:40 16:54 how fast can it respond to source transients? i.e. how fast/stable is the control loop? The PIC puts a PWM signal (integrated), and the current is stabilized with an OPAMP with feedback (there is a shunt resistor). I use the LMC662 with a slew rate of 1.1V/us.The first tests were success, but I don't have captures from my oscilloscope right now. Title: Re: Dummy Load Post by: WeSo on May 02, 2017, 12:20:54 12:20 By the way, I have some extra PCB (without components) in my drawer. I don't think I will use it, and maybe it could help someone.
Title: Re: Dummy Load Post by: zed65 on May 03, 2017, 09:33:04 21:33 Nice little project, but why the quite hefty dsPIC30F2010?
What are the other main components you are using (MOSfet, DAC, opAmp)? Title: Re: Dummy Load Post by: WeSo on May 03, 2017, 10:38:16 22:38 All components are in the schematic, but I can sum it up:
MOSFET: CSD18502KCS OpAmp: LMC662 Current monitor: INA250 Display 7-seg controller: SN74LS247 Temperature sensor: LM35 (a classic) Yes, maybe dsPIC30F2010 is "oversized", but I like, for example, the option for the encoders. Besides I had it from other old project ;D It was a small project, but I thought it might be useful to test some circuits, especially those with "sensitive" power supplies. Title: Re: Dummy Load Post by: sphinx on May 03, 2017, 11:00:46 23:00 would be nice to have a dummy looad to test my power supplies, how much are you asking for the pcb ?
Title: Re: Dummy Load Post by: WeSo on May 03, 2017, 11:05:16 23:05 The PCB it's free (only pay the shipment), I want to contribute to the community. I think that I have 1 or 2 more, but if there are people interested, we can order more.
Title: Re: Dummy Load Post by: sphinx on May 04, 2017, 10:56:06 10:56 i am in for one just tell me how to send you the shipment.
Title: Re: Dummy Load Post by: WeSo on May 04, 2017, 03:46:46 15:46 Only one little thing, due to an error with a transistor footprint, the dummy doesn't work using the USB power. This can be easily fixed changing two traces, but I prefer power it with the DC jack.
If it doesn't matter to you, send me a PM =) |