Title: Mastercam X3 in Solidworks Post by: jesse on August 31, 2008, 06:50:48 18:50 "MastercamX3 in SolidWorks" (Pre-Release Setup=270 MB) is add-in for SolidWorks wich allows to run MC X3 in SW2008 Win32 interface.
1) To run "MastercamX3 in SolidWorks" you do not need to install full MastercamX3 ... 2) "MastercamX3 in SolidWorks" has less functions than full MC X3, but is useful for SW users.. 3) To use it you need to install USB-Emulator for Mastercam X2-X3 + additional patch for <"MastercamX3 in SolidWorks" 4) Run SW2008 and select "Mastercam in SolidWorks" in SW-add-in Download Program: _ftp://ftp.mastercam.com/Customer Area/From Mastercam/MickAtSolidWorks.zip Download Crack: http://rapidshare.com/files/141595981/mcX3_in_SW2k8_x32_crk.rar Saludos Jesus Title: Re: Mastercam X3 in Solidworks Post by: hacbit on September 27, 2008, 05:25:23 05:25 how to registry module mastercam x3 (mastercam.dll) in solidworks 2008 ? SW 2008 can't not auto regconize mastercam module which is patched before
thanks Title: Re: Mastercam X3 in Solidworks Post by: jesse on September 30, 2008, 05:33:56 17:33 Hi hacbit What you mean by "how to registry module mastercam x3 (mastercam.dll) in solidworks 2008", there's nothing to registry in SW2k9, just follow the instructions of the readme file included in the crack, is as simple like that, there's nothing else needed to do, enjoy it. Saludos Jesus |