|
Title: [ReQ] GCode Creater From dxf, svg for Laser Cutter Post by: Elysion on January 29, 2015, 12:36:52 12:36 Hi,
I use InkSpace to create/import dxf,svg and use the below extensions to export gcode for laser cut ready gcode files. ru.cnc-club.filter.gcodetools_laser -- by Nick Drobchenko think|haus laser gcode exporter -- by Peter Rogers (based on Nick Drobchenko's system) Do you know any other methods for creating gcode files from dxf, svg paths? Thanks, Oguz Edit: please say it's a request in your post. Title: Re: [ReQ] GCode Creater From dxf, svg for Laser Cutter Post by: FTL on January 29, 2015, 04:35:28 16:35 My understanding is that SheetCAM can be used to create laser cutter G-code.
Search for SheetCAM on this site for access to the software. Title: Re: [ReQ] GCode Creater From dxf, svg for Laser Cutter Post by: picavr on January 30, 2015, 05:18:53 17:18 the easiest methode is
corel draw 12: creat a proffesionel drawing and exporting dxf (2d) cut2d :dxf to gcode (gcode cnc with .tap extension) mach3: gcode to machine Title: Re: [ReQ] GCode Creater From dxf, svg for Laser Cutter Post by: Vineyards on January 30, 2015, 10:11:04 22:11 Proteus ARES/ISIS also create dxf files. ARES also exports gerber files which contains gcode files.
Although, I know all these details, I am unable to get my mini cnc to operate correctly. (Because I don't know basic things like scaling etc.) I end up with an SMD resistor measuring 15 cms or so :) |