|
Title: CNC Software and Hardware Post by: solder on August 30, 2007, 10:41:13 22:41 How about a CNC Section?
Maybe a sub section of robotics. Many thanks to Rego, for all your time and hard work. Title: Re: CNC Software and Hardware Post by: demon on October 26, 2007, 10:58:04 22:58 Good idea
I have built a couple of machines and retrofitted 3. plus have some softs. Title: Re: CNC Software and Hardware Post by: mmladenovic on October 26, 2007, 11:41:00 23:41 Good idea !
Title: Re: CNC Software and Hardware Post by: ssssss on November 21, 2007, 05:58:58 17:58 Already a site exist for this topic only
http://www.cnczone.com Title: Re: CNC Software and Hardware Post by: Malcolm on December 03, 2007, 06:07:58 06:07 Good idea.I have built a couple of machines and retrofitted 3.plus have some softs.--Demon.
Hello Demon, I have built 3 types of non CNC --EDMs (Die Sinker & Wire). I wish to convert them to CNC. Any help? Thanks. Title: Re: CNC Software and Hardware Post by: luca_l on December 13, 2007, 09:38:04 21:38 I need a CNC Section too!
Because I trying to build my first one ??? Regards Luca Title: Re: CNC Software and Hardware Post by: joprinz on June 12, 2008, 09:50:21 21:50 well CNCZONE is indeed a very good Site for info on CNC. But it does NOT have any place where software links are posted. So cnczone is good only for the info part. To get the softwares we'l have to look elsewhere. n plus to be honest its really hard to find CNC controller softwares...I been looking for a proper working patch(without the 500 Lines Limit) for the latest releases of MACH3 forever now but no luck...So am stuck with an older version of it...Sonsivri has already an amazing collection or software links updated daily by posters... It be great to have a section for CNC Applications and related info. Moderators kindly look into it...
Title: Re: CNC Software and Hardware Post by: mmladenovic on June 12, 2008, 10:25:02 22:25 Greate idea
Title: Re: CNC Software and Hardware Post by: axial on June 16, 2008, 12:56:12 12:56 http://buildyourcnc.com/default.aspx
I hope this can help u. Title: Re: CNC Software and Hardware Post by: SONSiVRi on July 08, 2008, 01:49:23 01:49 Hit the try topic in section you want, in this case its might be "General Electronics" board.
lets see what happens than we may creat new board for it. Title: Re: CNC Software and Hardware Post by: pickit2 on April 26, 2014, 11:24:16 23:24 Hit the try topic in section you want, in this case its might be "General Electronics" board. Maybe a good time to try this again, most CNC posts look out of place where they are now.lets see what happens than we may creat new board for it. They need a new home. The number of members who use CNC is also growing, I would add 3d printing to the same forum / board. At this time, there is no where to ask advice on CNC or 3d printers / be it making or using. for example setting spindle speed, and feed rate, for different materials like plastic or aluminium. Title: Re: CNC Software and Hardware Post by: Ichan on April 27, 2014, 06:29:10 06:29 +1
And i think cnc laser (cutting/engraving/marking) can be added too. Who will gonna start? As i am here selling cnc machines from china (router, laser, 3d printer, and cnc parts) then i think i can contribute some. -ichan Title: Re: CNC Software and Hardware Post by: xor on April 27, 2014, 08:20:21 08:20 Quote from: pickit2 Maybe a good time to try this again, most CNC posts look out of place where they are now. They need a new home. I agree and glad to hear this...I have a lot documents about this subject because I try to build one I join gladfully to this initiative best regards Title: Re: CNC Software and Hardware Post by: zacpapac05 on May 19, 2014, 02:23:25 14:23 It is sounds great!
|