|
Title: Help: Open source software for a Robot Post by: satanicoo on October 02, 2010, 09:32:28 09:32 Hello there,
I am here asking if you guys know open source software to control a 6 axes Robot. It does not need to be free, but it must be based on a open standart. I mostly only need names, i will do the heavy research myself, but if possible add vantages/disadvantages to software you recommend. The motors to be controlled are normal DC motors, and the positioning of the axes are provided by potentiometers. Any help is trully apreciated, and i will try myself to add some software to this list untill the end of the weekend. Happy developing, satanicoo. Title: Re: Help: Open source software for a Robot Post by: blue_17 on January 04, 2011, 01:16:26 01:16 http://linuxcnc.org/
This distribution Linux is very good controller for robotic and cnc machines She uses parallel port |