Title: Recommendations for higher voltage power supply Post by: zac on July 27, 2019, 01:02:58 01:02 I have several variable power supplies, but none output higher than 50V. All are linear types with a conventional transformer that provides isolation so can be used in series if desired.
I'm thinking about purchasing a higher voltage (>120V) variable power supply since there are some reasonably priced models available now. I don't think I would use any voltage about 600V and that would mainly be used to test solar charge controllers, but it would need to be able to operate from 120VAC (60 hz). Any recommendations? I did a quick search and found these: https://www.aliexpress.com/item/HSPY-250V-4A-DC-programmable-power-supply-output-of-0-250V-0-4A-adjustable-With-RS232/32906629884.html?spm=2114.search0104.3.93.565f2243jZK52d&ws_ab_test=searchweb0_0,searchweb201602_6_10065_10130_10068_10547_319_10546_317_10548_10545_10696_10084_453_454_10083_10618_10307_537_536_10059_10884_10887_321_322_10103,searchweb201603_55,ppcSwitch_0&algo_expid=03bdeed1-bc0b-4e4d-ab78-9c703ab45c7b-14&algo_pvid=03bdeed1-bc0b-4e4d-ab78-9c703ab45c7b https://www.aliexpress.com/item/HSPY-Series-Programmable-Digital-Laboratory-Switching-DC-Power-Supply-RS232-Port-30V-5A-10A-1000V-0/32881682080.html?spm=2114.search0104.3.180.663c5850te3ymv&ws_ab_test=searchweb0_0,searchweb201602_6_10065_10130_10068_10547_319_10546_317_10548_10545_10696_10084_453_454_10083_10618_10307_537_536_10059_10884_10887_321_322_10103,searchweb201603_55,ppcSwitch_0&algo_expid=f563bfae-db6f-45eb-a36f-b43a7ca3c50b-25&algo_pvid=f563bfae-db6f-45eb-a36f-b43a7ca3c50b https://www.aliexpress.com/item/Hspy-600V-3A-DC-Programmable-Regulated-DC-Power-Supply-0-600V-0-3A-adjustable-1800W/32962860403.html?spm=2114.search0104.3.64.663c5850te3ymv&ws_ab_test=searchweb0_0,searchweb201602_6_10065_10130_10068_10547_319_10546_317_10548_10545_10696_10084_453_454_10083_10618_10307_537_536_10059_10884_10887_321_322_10103,searchweb201603_55,ppcSwitch_0&algo_expid=f563bfae-db6f-45eb-a36f-b43a7ca3c50b-9&algo_pvid=f563bfae-db6f-45eb-a36f-b43a7ca3c50b Title: Re: Recommendations for higher voltage power supply Post by: sadman on July 27, 2019, 02:27:00 14:27 i think buy a ready made power supply instead of doing RND from scratch there are some idea's make switch mode or linear regulator driver to control the IGBT for high voltage and current. T.I and LT have some voltage regulator driver chip that can drive the IGBT transistor for high voltage control.
Title: Re: Recommendations for higher voltage power supply Post by: Captain_Boblo on August 08, 2019, 09:56:36 09:56 Have a look on ebay for old electrophoresis power supplies, I have a few BioRad units that go to 200V @ 2A and another that goes to 3kV @ 400mA, they might work out cheaper than a new unit.
Title: Re: Recommendations for higher voltage power supply Post by: papy_bidouille on August 08, 2019, 03:39:13 15:39 here is the power supply that I use 0 to 400 volts max and 5A limit in programmable current Title: Re: Recommendations for higher voltage power supply Post by: UKFlyer on August 08, 2019, 03:46:14 15:46 Read https://www.vintage-radio.net/forum/showthread.php?t=94181 before going for an electrophoresis power supply. Seem to be two major issues - at least on the referenced model - but may be generic.
Output voltage is centred on ground so both sides are potentially lethal. Very long time constant in the regulation feedback loop and useless with capacitative load. Title: Re: Recommendations for higher voltage power supply Post by: dikris on August 09, 2019, 09:14:54 21:14 check aliexpress. the prices are low and the quality is reasonable.
|