|
Title: Avr Programer Full Free Usb Post by: darck_khronos on July 09, 2009, 12:52:36 00:52 USBasp - USB programmer for Atmel AVR controllers
USBasp Foto USBasp is a USB in-circuit programmer for Atmel AVR controllers. It simply consists of an ATMega48 or an ATMega8 and a couple of passive components. The programmer uses a firmware-only USB driver, no special USB controller is needed (http://www.fischl.de/usbasp/bilder/usbasp_circuit.png) Link For Donwload Firmware: http://rapidshare.com/files/253600121/usbasp.2009-02-28.tar.gz Title: Re: Avr Programer Full Free Usb Post by: Mega32 on July 22, 2009, 02:49:33 14:49 May i suggest you link to the real homepage of the USBASP
http://www.fischl.de/usbasp/ Then any updates would also be found by the users here. Another link describing the building of the above http://www.scienceprog.com/building-and-installing-usbasp-usb-programmer-of-avr-microcontrollers/ And a little lesson in programming with avrdude (included in WinAVR) http://elecrom.wordpress.com/2009/04/15/avrdude-tutorial-burning-hex-files-using-usbasp-and-avrdude/ /Mega32 |