The Godfather talking
You may crack software. How about me?
Sonsivri
 
*
Welcome, Guest. Please login or register.
Did you miss your activation email?
March 28, 2024, 08:03:32 20:03


Login with username, password and session length


Pages: [1]
Print
Author Topic: Velleman K8000  (Read 3045 times)
0 Members and 1 Guest are viewing this topic.
trampe
Junior Member
**
Offline Offline

Posts: 86

Thank You
-Given: 527
-Receive: 261


« on: April 05, 2008, 08:30:56 08:30 »

Specifications

    * digital outputs:
          o optocoupler, open collector output: 50mA - max. 30VDC
    * digital inputs:
          o optocoupler input: 5V/5mA, max. 20V/40mA
    * analogue outputs:
          o 8 outputs DAC1 to DAC8, resolution: 64 steps
          o minimum output voltage: 0.1V at 2mA
          o maximum output voltage: 11.5V adjustable at 2mA
          o resolution per step from 0.1 to 11.5V: 160mV +/- 90mV
          o 1 precision output DA1, resolution: 256 steps
          o minimum output voltage: 0V
          o maximum output voltage: 4.5V adjustable at 0.5mA
          o resolution per step from 0 to 4.5V: 17.5mV
    * analogue inputs:
          o 4 analogue inputs AD1 to AD4, resolution: 256 steps
          o minimum input voltage: 0V
          o maximum input voltage: 5V
          o input impedance: 50Mohm
          o resolution: 19.5mV
    * communication protocol: I²Cbus
    * LED indication for each I/O
    * 25 pin D series connector for computer
    * 25 pin D series connector for printer
    * supply voltage: 6vac and 15Vac
    * PCB dimensions: 237 x 133mm (9.3" x 5.2")

I have made a PCB (in PDF and Altium Designer formate).
I will design a smaller PCB in a few days.  This project can be used with ProfiLab.

http://rapidshare.com/files/104987402/Velleman_K8000.zip

Trampe
« Last Edit: April 05, 2008, 10:42:06 10:42 by trampe » Logged
bbarney
Moderator
Hero Member
*****
Offline Offline

Posts: 2430

Thank You
-Given: 405
-Receive: 545


Uhm? where did pickit put my mute button


« Reply #1 on: April 05, 2008, 03:37:40 15:37 »

Really nice work there Trampe,good project that I could really use.the smaller pcb your talking about is it going to be mostly surface mount or through the hole?
Logged

Ever wonder why Kamikaze pilot's wore helmet's ?
trampe
Junior Member
**
Offline Offline

Posts: 86

Thank You
-Given: 527
-Receive: 261


« Reply #2 on: April 27, 2008, 07:21:28 19:21 »

All IC vil be DIL (through the hole) and also every capasitors (except 100nF).
 Resistors will be 1206 (SMD) If you have problem to get the TDA8444 (DAC) then try Cricklewood Electronics Ltd  ([email protected] ) costs £2.50

Trampe



Posted on: April 27, 2008, 07:19:42 19:19 - Automerged

I have made a PCB (in PDF and Altium Designer formate).
I will design a smaller PCB in a few days.  This project can be used with ProfiLab.

http://rapidshare.com/files/104987402/Velleman_K8000.zip

Trampe
Logged
Pages: [1]
Print
Jump to:  


DISCLAIMER
WE DONT HOST ANY ILLEGAL FILES ON THE SERVER
USE CONTACT US TO REPORT ILLEGAL FILES
ADMINISTRATORS CANNOT BE HELD RESPONSIBLE FOR USERS POSTS AND LINKS

... Copyright © 2003-2999 Sonsivri.to ...
Powered by SMF 1.1.18 | SMF © 2006-2009, Simple Machines LLC | HarzeM Dilber MC