The Godfather talking
You think I am funny guy huh?
Sonsivri
 
*
Welcome, Guest. Please login or register.
Did you miss your activation email?
September 23, 2020, 04:45:53 04:45


Login with username, password and session length


Pages: [1]
Print
Author Topic: Pixel LED project abuse  (Read 356 times)
0 Members and 1 Guest are viewing this topic.
ramachandran
Newbie
*
 Warned
Offline Offline

Posts: 15

Thank You
-Given: 3
-Receive: 7


« on: April 30, 2020, 02:54:14 02:54 »

In Atmega328, How to connect the two or more atmgea328 ic's to work at the same time similarly?
If anyone knows, please tell me.

Posted on: April 28, 2020, 01:23:46 13:23 - Automerged

To increase the speed of the atmega328 and 8 based controller, change the crystal to 16MHZ, And 20MHZ, it may increase the speed.
to slow the speed use 12MHZ. It can be used after programmed.

Posted on: April 29, 2020, 06:50:40 06:50 - Automerged

In 5000 Pixel led circuit, what is the work of max485 ic?
Anyone knows, explain to me.

Posted on: April 27, 2020, 10:16:07 10:16 - Automerged

Used for long range communication and also to work on DMX mode. This will work only when selected appropriately in the software while programming. Please go through the video links given in the sticky post which explains most of the doubts with illustrations. But it is used in 5000v2 and higher which is not released in the forum.

Sir, I have 5000V2 software.
But ask License file.

How can I post it??

Posted on: April 27, 2020, 01:06:49 13:06 - Automerged

This is called the Neutral cut or the DMX mode which is not activated a previously mentioned. When activated, will post details about the same.
There is any way to work without software?

Posted on: April 28, 2020, 05:51:06 17:51 - Automerged

Posted on: 29 April 2020, 13:37:51 -

Why meddle with crystal values while you can set the speed of every design in the software itself..!
When the 1200 software set full speed, but the designs play on average (slow) speed, with 16MHz. But I changed to 20Mhz just some speed increased.
20MHz not for Atmega328.
what is the reason for slow and high speed? please explain it. There is Any way to increase the speed when 16MHz and in software full speed.?
Logged
Mine
Inactive

Offline Offline

Posts: 1

Thank You
-Given: 0
-Receive: 0


« Reply #1 on: August 12, 2020, 10:08:03 10:08 »

Hi !! Ahmed do you have 5000 V2 Final and Hex code exported version ?
Logged
pickit2
Moderator
Hero Member
*****
Offline Offline

Posts: 4380

Thank You
-Given: 754
-Receive: 3147


There is no evidence that I muted SoNsIvRi


« Reply #2 on: August 12, 2020, 10:13:37 10:13 »

Hi !! Ahmed do you have 5000 V2 Final and Hex code exported version ?
Here we go again...
Please Follow the Request from owner of the post...
or shall I remove you now sir?
Logged

Note: So you have Not made a Post in the Forum. Without Posts we have No Forum, That's ok Can I Mute you now sir
Pages: [1]
Print
Jump to:  


DISCLAIMER
WE DONT HOST ANY ILLEGAL FILES ON THE SERVER
USE CONTACT US TO REPORT ILLEGAL FILES
ADMINISTRATORS CANNOT BE HELD RESPONSIBLE FOR USERS POSTS AND LINKS

... Copyright 2003-2999 Sonsivri.to ...
Powered by SMF 1.1.18 | SMF © 2006-2009, Simple Machines LLC | HarzeM Dilber MC