Sonsivri
 
*
Welcome, Guest. Please login or register.
Did you miss your activation email?
March 29, 2024, 04:58:46 16:58


Login with username, password and session length


Pages: [1]
Print
Author Topic: Req: Pcb data file for mk-3965 power supply  (Read 3529 times)
0 Members and 1 Guest are viewing this topic.
max
Senior Member
****
Offline Offline

Posts: 314

Thank You
-Given: 1595
-Receive: 52


« on: February 06, 2018, 09:30:54 21:30 »

Hi,

Requires pcb data or gerber file for the mk-3965 power supply project.
see the attached pdf.

Regards
Logged

Fate arrived and made the conscious unconscious It silenced the activity of life.
pickit2
Moderator
Hero Member
*****
Offline Offline

Posts: 4639

Thank You
-Given: 823
-Receive: 4194


There is no evidence that I muted SoNsIvRi


« Reply #1 on: February 06, 2018, 10:47:40 22:47 »

Here is full Article
with pcb layout in PDF
Logged

Note: I stoped Muteing bad members OK I now put thier account in sleep mode
bigtoy
Active Member
***
Offline Offline

Posts: 238

Thank You
-Given: 322
-Receive: 297


« Reply #2 on: February 07, 2018, 11:04:31 23:04 »

Be warned there's an obvious error in the schematic (which is fixed in the PCB layout). See attached file.

Logged
max
Senior Member
****
Offline Offline

Posts: 314

Thank You
-Given: 1595
-Receive: 52


« Reply #3 on: February 09, 2018, 08:49:25 20:49 »

Hi,

It is possible to convert the pdf or image data to gerber data?

Regards
Logged

Fate arrived and made the conscious unconscious It silenced the activity of life.
Unhappy
Senior Member
****
Offline Offline

Posts: 283

Thank You
-Given: 984
-Receive: 100


« Reply #4 on: February 10, 2018, 07:29:08 07:29 »

Hi,

It is possible to convert the pdf or image data to gerber data?

Regards
Try using sprint PCB and associated software to convert pdf to pcb file and then export your Gerber.
Search for Sprint PCB in Sonsivri forums and you will find it Grin

Additionally look here for complete tutorial
http://www.sonsivri.to/forum/index.php?topic=34228.msg178821#msg178821
« Last Edit: February 10, 2018, 07:39:43 07:39 by Unhappy » Logged
papy_bidouille
Newbie
*
Offline Offline

Posts: 24

Thank You
-Given: 128
-Receive: 22


« Reply #5 on: February 10, 2018, 07:57:15 07:57 »

 you can do the following:
convert the PDF file to a GERBER file using Gerbview
 the resulting GERBER file into Sprint Layout which allow snapping to  ...
 center of a pad
 try to guess the diameter of each pad on the  ...
 with the right hole size
export the Excellon file.
Logged
Sideshow Bob
Cracking Team
Hero Member
****
Offline Offline

Posts: 972

Thank You
-Given: 230
-Receive: 959



« Reply #6 on: February 10, 2018, 08:52:43 08:52 »

FAB 3000 is a software that do this. Is a software that can do this. If it is a one time job. Perhaps you can use the trail version for this
https://www.numericalinnovations.com/collections/fab-3000-gerber-cam. We also had a thread about this software here
http://www.sonsivri.to/forum/index.php?topic=33913.75 But it has not been used much recent years, and links may be dead. However this circuit is designed around the LM723 type IC. You will find tons of designs around this circuit on the net
« Last Edit: February 11, 2018, 10:20:23 10:20 by Sideshow Bob » Logged

I have come here to chew bubblegum and kick ass... and I'm all out of bubblegum
max
Senior Member
****
Offline Offline

Posts: 314

Thank You
-Given: 1595
-Receive: 52


« Reply #7 on: February 14, 2018, 09:17:10 21:17 »

Hi,
Here is the gerber and sprint files of the pcb (copper side)
the gerber is generated using ace3000.

Regards
Logged

Fate arrived and made the conscious unconscious It silenced the activity of life.
Pages: [1]
Print
Jump to:  


DISCLAIMER
WE DONT HOST ANY ILLEGAL FILES ON THE SERVER
USE CONTACT US TO REPORT ILLEGAL FILES
ADMINISTRATORS CANNOT BE HELD RESPONSIBLE FOR USERS POSTS AND LINKS

... Copyright © 2003-2999 Sonsivri.to ...
Powered by SMF 1.1.18 | SMF © 2006-2009, Simple Machines LLC | HarzeM Dilber MC