The Godfather talking
You may crack software. How about me?
Sonsivri
 
*
Welcome, Guest. Please login or register.
Did you miss your activation email?
October 20, 2019, 05:20:14 17:20


Login with username, password and session length


Pages: [1]
Print
Author Topic: PICKit2 programmer can't recognize dsPIC30f2010  (Read 1360 times)
0 Members and 1 Guest are viewing this topic.
biomed12
Junior Member
**
Offline Offline

Posts: 93

Thank You
-Given: 67
-Receive: 5


« on: April 18, 2016, 11:52:13 11:52 »

Hello everyone,

I have a pickit2 programmer. I have been using it to program my 16f877a, 16f628a and 18f4550... A few weeks ago, I bought an dsPIC30f2010 to start working with dsPIC series. But, the programmer doesn't see the chip. I updated firmware and software of the programmer but it is not working although there isn't a problem with other chips. Is there any common issue i don't know?

Thanks.

Use titles that reflect your problem...
« Last Edit: April 18, 2016, 11:42:28 23:42 by metal » Logged
Stokni
Newbie
*
Offline Offline

Posts: 8

Thank You
-Given: 20
-Receive: 12


« Reply #1 on: April 18, 2016, 12:23:00 12:23 »

Pic is on compatibility list, most likely defective chip or incorrect wiring.
Logged
biomed12
Junior Member
**
Offline Offline

Posts: 93

Thank You
-Given: 67
-Receive: 5


« Reply #2 on: April 18, 2016, 12:28:55 12:28 »

Pic is on compatibility list, most likely defective chip or incorrect wiring.


I have decided to buy a different dsPIC chip. I couldn't see any problem and I am really bored with it.
« Last Edit: April 18, 2016, 01:48:07 13:48 by biomed12 » Logged
Signal
Active Member
***
Offline Offline

Posts: 186

Thank You
-Given: 101
-Receive: 78



« Reply #3 on: April 18, 2016, 01:54:52 13:54 »

I assume that the chosen dsPIC is in compatibility list of PICkit2. Then most likely you can use PICkit2 to program this chip from a standalone programmer application only, not from MPLAB. That was a decision of Microchip - a limited support of obsolete PICkit2 from MPLAB - even if PICkit2 is able to program new chip an MPLAB is not taught to use it for new parts. I'm too lazy to search for proof links now - it is just from my memory.

P. S. I think that the title of this topic is worth to ignore it. Looks like "Do not push" button.
Logged

Give a right name to a right game and play it right
Checksum8
Junior Member
**
Offline Offline

Posts: 99

Thank You
-Given: 90
-Receive: 79


« Reply #4 on: April 18, 2016, 03:42:22 15:42 »

Did you connect the PGC and PGD to the right pins? The 30F family does not use the same portb.7 and portb.6 as the pic16/18's. See datasheet -portf.2 and portf.3 on the dspic30f2010. Sorry if this seems obvious
Logged
pickit2
Moderator
Hero Member
*****
Offline Offline

Posts: 4198

Thank You
-Given: 715
-Receive: 2762


There is no evidence that I muted SoNsIvRi


« Reply #5 on: April 18, 2016, 07:19:58 19:19 »

Shame this is in a topic moderated by bbarney
Logged

Note: Season & New Year Give Away. 3 year Holiday for Zero Posting
Pages: [1]
Print
Jump to:  


DISCLAIMER
WE DONT HOST ANY ILLEGAL FILES ON THE SERVER
USE CONTACT US TO REPORT ILLEGAL FILES
ADMINISTRATORS CANNOT BE HELD RESPONSIBLE FOR USERS POSTS AND LINKS

... Copyright 2003-2999 Sonsivri.to ...
Powered by SMF 1.1.18 | SMF © 2006-2009, Simple Machines LLC | HarzeM Dilber MC