Sonsivri
 
*
Welcome, Guest. Please login or register.
Did you miss your activation email?
December 08, 2016, 03:11:57 15:11


Login with username, password and session length


Pages: [1]
Print
Author Topic: [Q] RS-232 surge protection circuit  (Read 1564 times)
0 Members and 1 Guest are viewing this topic.
elcielo
Senior Member
****
Offline Offline

Posts: 257

Thank You
-Given: 110
-Receive: 229



« on: August 19, 2015, 03:03:48 03:03 »

I want surge protection circuit for RS-232.
plz help me.
Logged
Old_but_Alive
V.I.P
Active Member
*****
Offline Offline

Posts: 211

Thank You
-Given: 154
-Receive: 56


« Reply #1 on: August 19, 2015, 06:37:12 06:37 »

do you really mean RS232 which is a standard for the voltage levels ( which is roughly +-12V, or UART voltage levels such as 3.3V or 5V
Logged
zab
Active Member
***
Offline Offline

Posts: 132

Thank You
-Given: 24
-Receive: 54


« Reply #2 on: August 19, 2015, 08:08:51 08:08 »

Zener diodes and MOVs are used to protect circuit from over voltages. these are selected according to specified voltages,
this may help you
http://digital.ni.com/public.nsf/allkb/D21074403CE0179E86256C1D0068E819
Logged
UncleBog
Junior Member
**
Offline Offline

Posts: 86

Thank You
-Given: 107
-Receive: 136


« Reply #3 on: August 19, 2015, 08:23:16 08:23 »

Many RS232 transceivers include transient suppression, see http://www.maximintegrated.com/en/products/interface/transceivers/rs-232-transceivers/esd-protected-rs-232.html, for additional protection you can add an external TVS, start here http://www.vishay.com/diodes/protection-tvs-esd/trans-zorb/ .
Logged
pickit2
Moderator
Hero Member
*****
Offline Offline

Posts: 3816

Thank You
-Given: 567
-Receive: 2049


There is no evidence that I muted SoNsIvRi


« Reply #4 on: August 19, 2015, 11:04:51 11:04 »

I want surge protection circuit for RS-232.
plz help me.
Show us what you have done to help yourself...
All your posts have plz help me...
Your in a forum Not Sending Texts via cell phone...
FFS Try help your self first...

RS-232 is a Standard their is tons of stuff on the internet..
you want others to read your mind...
Logged

Note: If you have no posts other than, I want or reporting a dead link Then you can't complain If I remove your post So Stop Leeching
Gallymimu
Hero Member
*****
Offline Offline

Posts: 579

Thank You
-Given: 101
-Receive: 151


« Reply #5 on: August 23, 2015, 05:07:01 05:07 »

I would suggest buying a part with built in protection.  There isn't much point in adding external components when they are available built in.
Logged
titi
Active Member
***
Offline Offline

Posts: 192

Thank You
-Given: 1434
-Receive: 705



« Reply #6 on: August 23, 2015, 05:34:18 17:34 »

Hi elcielo,
Here is some standard protection circuits for RS232:



RS-232 surge protector circuit using VDRs


RS-232 surge protector circuit using zener diodes

http://www.epanorama.net/circuits/rs232_protector.html

Best regards.

Logged
Pages: [1]
Print
Jump to:  


DISCLAIMER
WE DONT HOST ANY ILLEGAL FILES ON THE SERVER
USE CONTACT US TO REPORT ILLEGAL FILES
ADMINISTRATORS CANNOT BE HELD RESPONSIBLE FOR USERS POSTS AND LINKS

... Copyright 2003-2999 Sonsivri.to ...
Powered by SMF 1.1.18 | SMF © 2006-2009, Simple Machines LLC | HarzeM Dilber MC