Sonsivri
 
*
Welcome, Guest. Please login or register.
Did you miss your activation email?
March 28, 2024, 08:06:17 20:06


Login with username, password and session length


Pages: [1]
Print
Author Topic: BG7TBL gpsdo master reference info needed  (Read 4099 times)
0 Members and 1 Guest are viewing this topic.
ehnonymouse
Newbie
*
Offline Offline

Posts: 28

Thank You
-Given: 15
-Receive: 13


« on: September 24, 2015, 07:01:43 19:01 »

Hi guys, I just bought the Trimble version of this from ebay / China. There are three LEDs on the front, a red WARN one and red and green labelled ACT.

On turning on the green ACT LED comes on constantly, after a while it blinks slowly, and after a while longer it begins to blink quickly. Eight hours later, I still just have one green blinking LED.

Is it faulty? How do you know when it's locked?
Logged
titi
Active Member
***
Offline Offline

Posts: 229

Thank You
-Given: 3679
-Receive: 834



« Reply #1 on: September 25, 2015, 06:16:35 18:16 »

Hi ehnonymouse,
To work correctly, GPSDO need an external antenna to receive GPS signals from satellites, this antenna need receive generally minimum 3 Satellites to have enough data to lock the PLL that give you the 10MHz at output.

May be you can found information on this forum:
http://www.eevblog.com/forum/testgear/bg7tbl-gpsdo-master-reference/

Best regards.
Logged
ehnonymouse
Newbie
*
Offline Offline

Posts: 28

Thank You
-Given: 15
-Receive: 13


« Reply #2 on: October 10, 2015, 09:27:48 09:27 »

Thank you for the link.
Logged
Pages: [1]
Print
Jump to:  


DISCLAIMER
WE DONT HOST ANY ILLEGAL FILES ON THE SERVER
USE CONTACT US TO REPORT ILLEGAL FILES
ADMINISTRATORS CANNOT BE HELD RESPONSIBLE FOR USERS POSTS AND LINKS

... Copyright © 2003-2999 Sonsivri.to ...
Powered by SMF 1.1.18 | SMF © 2006-2009, Simple Machines LLC | HarzeM Dilber MC