The Godfather talking
You can run, but you can't hide.
Sonsivri
 
*
Welcome, Guest. Please login or register.
Did you miss your activation email?
December 03, 2016, 02:42:52 14:42


Login with username, password and session length


Pages: [1]
Print
Author Topic: New version Saleae Logic software (1.2.2)  (Read 1763 times)
0 Members and 1 Guest are viewing this topic.
towlerg
V.I.P
Active Member
*****
Offline Offline

Posts: 136

Thank You
-Given: 282
-Receive: 48

What is this for?


« on: June 29, 2015, 02:58:53 02:58 »

Tried the latest version in my Logic clone (actually CY7C68013A breakout board). Tested with 2 RS232 signals (9600), oddly it reported it was unable to operate at 24 or 16 Msamples/sec. Other than that, new version seems OK and a few more analyzers added - now has USB fs but I dont know if that will work with my hardware. I'll give it a spin when I get both versions installed.

Reverted to 1.1.34 with same signals will run at 24 Msamples/sec

Changelog for 1.2.2 is pending.

George
« Last Edit: June 29, 2015, 03:53:56 03:53 by towlerg » Logged

Win 7 Ult x86 SP1 on HP6910p
pickit2
Moderator
Hero Member
*****
Offline Offline

Posts: 3816

Thank You
-Given: 567
-Receive: 2049


There is no evidence that I muted SoNsIvRi


« Reply #1 on: June 29, 2015, 09:29:28 09:29 »

George
Is that a virgin board with original 24LC128 or you replaced it with one recommended in main topic?
Logged

Note: If you have no posts other than, I want or reporting a dead link Then you can't complain If I remove your post So Stop Leeching
towlerg
V.I.P
Active Member
*****
Offline Offline

Posts: 136

Thank You
-Given: 282
-Receive: 48

What is this for?


« Reply #2 on: June 29, 2015, 03:07:25 15:07 »

Pickit2

Yes and no, it's an unmodified board pluged into a piece of breadboard with an 24LC01 and some protection, it's not necessary to remove or disable the on-board EEPROM.

From about 1.1.24ish protection was added to detect clones, protection detected the oversize EEPROM. But I suspect, you already knew that.

George   
« Last Edit: June 29, 2015, 03:43:15 15:43 by towlerg » Logged

Win 7 Ult x86 SP1 on HP6910p
towlerg
V.I.P
Active Member
*****
Offline Offline

Posts: 136

Thank You
-Given: 282
-Receive: 48

What is this for?


« Reply #3 on: October 08, 2015, 06:32:44 18:32 »

As stated in an a related thread, the latest beta, 1.2.3 beta seems to solve the problem. The problem is listed as solved in the change log - along with quite a few others.

George
Logged

Win 7 Ult x86 SP1 on HP6910p
norkimo
Newbie
*
Offline Offline

Posts: 26

Thank You
-Given: 8
-Receive: 13


« Reply #4 on: October 08, 2015, 10:56:48 22:56 »

Thanks for the update, George.  For future reference, I have a handful of original devices, so if you ever need to test an original against a clone, let me know and I will be happy to post the results. :-)
Logged
Mega32
Active Member
***
Offline Offline

Posts: 175

Thank You
-Given: 71
-Receive: 38


« Reply #5 on: November 20, 2015, 03:46:20 15:46 »

I have a few clones , but can't seem to find the "suggested original eeprom"
Could anyone write what eeprom i have to replace the "clone version" with

TIA
Mega32
Logged
towlerg
V.I.P
Active Member
*****
Offline Offline

Posts: 136

Thank You
-Given: 282
-Receive: 48

What is this for?


« Reply #6 on: November 20, 2015, 09:39:29 21:39 »

#Mega32

most clones/breakout boards were supplied with a larger EEPROM (holds USB PID and SID) than that which was fitted to Saleae's (and USBee for that matter) original product. Presumably this was done because the old 24LC01 EEPROM's were harder to source.

Saleae detect the difference and exploit it as a protection scheme.

You can defeat this protection scheme by adding 24LC01 essentially in parallel with the existing 24LC128. Because of the vagaries of addressing the CY7C68013A sees the 01 first.

George

« Last Edit: November 21, 2015, 01:38:58 01:38 by towlerg » Logged

Win 7 Ult x86 SP1 on HP6910p
Pages: [1]
Print
Jump to:  


DISCLAIMER
WE DONT HOST ANY ILLEGAL FILES ON THE SERVER
USE CONTACT US TO REPORT ILLEGAL FILES
ADMINISTRATORS CANNOT BE HELD RESPONSIBLE FOR USERS POSTS AND LINKS

... Copyright 2003-2999 Sonsivri.to ...
Powered by SMF 1.1.18 | SMF © 2006-2009, Simple Machines LLC | HarzeM Dilber MC