nokia LCD color 6100 with pic 18!

[lead_inovation]

hi! everybody. i want to make a LCD nokia 6100 display with Pic18. but it can't work. from:
//www.hobbypic.com// 
anybody help,or tutorial me!

[GreenGiant]

Please provide more details. Like what you have tried.

[lead_inovation]

OK! thank to replied, i wan't to make a graphic color GUI with nokia lcd,because it low cost. and use Pic to control it. but when i tried to make it from hoppypic it can't not run. and now i want to start new with tutorial from everybody in sonsivri. thank a lot.(sorry english so bad)

[charnyutk]

Hi, I think it can help you.
best regard

[chatakundi]

Hello,

I have used the Nokia 6110 color LCD with PIC16F877A working at 20 Mhz crystal. If you are interested, I can send you the HT-PIC code. I think the Nokia 6110 LCD is similar to the Nokia 6100 LCD. Make sure that you give the proper voltage to the backlight LED since this is very important to see the graphics on the display. I had initially connected less voltage to the backlight and could not see the graphics.

[lead_inovation]

OK! thank's chatakundi. i start my project "display nokia LCD 6100" in 2 month,but it isn't compleled. please tutorial me about hardware,firmware. thank a lot!

[lead_inovation]

hic! where you going? chatakundi!!!

[dideco]

I am also interested in using Nokia 6110 color LCD with PIC16F877A working at 20 Mhz crystal. Will you please send information...

[chatakundi]

Hello all,
How do I send the code ?
Can I upload it somewhere or if you can provide email ID I can email it.

Thanks.

[lead_inovation]

you can upload anywhere.next, post link in our forum. and all member can download your project.

[chyelim]

Hi, you can upload to http://www.rapidshare.com or http://www.badongo.com so that everyone in this forum who are interested can download. Please upload the full project. Thanks !

[chatakundi]

Hello all,
I will upload to the rapidshare this weekend.

[ficho]

http://thomaspfeifer.net/nokia_6100_display.htm
Can check this out as well...
regards ficho

[stam]

Is there anyway to handle the 6100 screen with a pic16?

I can't find in my town any pic18xxxx and I am stuck with the pic16f628

[fagari]

My 6100 Color LCD screenshot.

I use 6100 driver from http://www.hobbypic.com/

[sevesa]

I neen nokia LCD color 6100 with pic 24

[lead_inovation]

My 6100 Color LCD screenshot.

I use 6100 driver from http://www.hobbypic.com/

OK fagari, in nokia 6100 project from hobbypic, my error is LCD nokia in Asia different with euro.  terminal   

[fagari]

Hi lead_inovation ;
Yes, Nokia 6100 LCD have two type.
it use Philips/NXP PCF8833 chip or Epson S1D15G00 chip.

Hobbypic project use Philips/NXP PCF8833 chip.
if you have Epson S1D15G00 chip. Ony change command set. it is very easy.


This document will help you.

http://gnuarm.alexthegeek.com/lcd/Nokia_6100_LCD_Display_Driver.pdf

[suresh kumar]

get your self a mikroc version 2.0.0.1 or higher.

go to tools and choose glcd bitmap editor.

the bitmap editor can convert any picture to a version that is suitable to be displayed in nokia lcd 6100

good luck

[saint]

Hi lead_inovation, i had the same problem with the 6100LCD(Philips)+18F4520...I spend couple of days and it made me freak...Than i tried same code on 18F452 (has the same rom and ram size in it) it works perfect...I still couldn't solve the problem with 18F4520...

I've downloaded the code from:

http://www.hobbypic.com/index.php?option=com_content&task=view&id=15&Itemid=36

and recompile it to 18F452...But remmember, you must use PHILIPS or LEADIS chipset LCD...

If you need help please ask... 

[iphone]

My 6100 Color LCD screenshot.

Btw, how much the 6100 Color LDC price ? any url to buy ?

[saint]

I got my Philips LCD's $11 and they have good contrast...

Where do you live iphone?? I can suggest many places if you live in Turkey/Ankara

[lead_inovation]

OK! thank's saint! because i can't to be define my lcd is PHILIPS or EPSON controller. so i don't know where my error! 
many thank's saint and all member in sonsivri!

[saint]

You're welcome Lead_inovation, if you need any help about your project i'll be around    I can send you schematic and my source if you want...

Take care...

[lead_inovation]

dear saint!  . please upload  schematic and source code if you can. thank you.

[saint]

Dear lead_inovation !!   

Here is the schematic and CCS source of my initilal project...As i mentioned before, code has been downloaded from hobbypic.com and modified for 18F452...Xtal value is 20Mhz (for overclock) but you can change the value without recompile the code...Buttons are used for changing the contrast of LCD...You can also connect a LED to port B0, so you can see the activity that PIC is working...LED should be blinking on 10MHz Xtal and should blink very fast (almost seems not blinking) on 20MHz Xtal...

PIC is also working with 3.3V...

Be sure that you have applied very stable power supply to the input...

Good luck on your experiments 

!! THIS SOURCE CODE CAN BE USE ONLY WITH "PHILIPS 6100 NOKIA and COMPATIBLE LCDs" You can modify the code for "EPSON" !!



Posted on: January 21, 2008, 10:27:27 10:27 - Automerged
PS. I'm working on a desktop clock+wireless thermometer project by using 6100 LCD now...I'll post it when it's done...Please don't ask me when it will be here...I'm really busy on these days...But i promise, it will be post in here soon...

saint...

[tek]

Hello
Is there any libraria the proteus containing this display?
Thanks

[lightt]

Hi,

I live in Ankara. Please let me know where can I buy this LCD.

I got my Philips LCD's $11 and they have good contrast...

Where do you live iphone?? I can suggest many places if you live in Turkey/Ankara

[sevesa]

http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=2608&page=1&param=en532061&redirects=Graphics

Microchip Graphics Display Application Design Center

[saint]

Hi,

I live in Ankara. Please let me know where can I buy this LCD.

Sorry for late reply...
You can find it from:

Çalkan İthalat Ldt.Şti
Adres : Anafartalar Cad.Kütükçüoğlu Kuyumcular Çarşısı 1.kat No:53 Ulus / Ankara
Telefon : 0 312 311 11 39
Fax  : 0312 311 93 41

[inkognitous]

I have one too on atmega16
http://forum.lcdinfo.com/viewtopic.php?t=586&start=140

[kittikhun]

i will bring it with PIC16F 555

[eSilviu]

let's see:
to set 1 pixel, you need to make 10 acceses to display (12bits, as newer display can only)
to draw a character (8x8) pixel by pixel, you need to set 64 pixels = 640 acceses. That's 640x(9bit DATA+18bit CLK)=17280 port acceses
that's about 20.000instructions just to set a character on the screen!!!!
That's far to slow to use display with an average PIC or any other microcontroller.
It's usable but SLOW...
If you manage to use SPI module from microcontroller, you can increase speed about 10 times. If you manage to send character as raw data to the LCD (CASET,PASET+RGB for all pixels for the character), you will increase speed even more. But that need more ROM for character map...

[tomywong]

Another sample code for P18F4620, using mikroPascal.
Here : http://www.filefactory.com/file/ahe91dc/n/nokia_6100_PH_zip

[zerro]

dear saint,
could you upload Proteus model and library for this LCD (Nokia 6100)
Thank you!

[AtomSoft]

Dude i would gladly donate some funds for that Nokia 6100 LCD model in proteus.... I have about 4 nokia 7110 lcds i would be willing to also part with if need be