Sonsivri
 
*
Welcome, Guest. Please login or register.
Did you miss your activation email?
March 19, 2024, 10:26:58 10:26


Login with username, password and session length


Pages: [1]
Print
Author Topic: Dc motor with encoder  (Read 8545 times)
0 Members and 1 Guest are viewing this topic.
KIM-DU
Junior Member
**
Offline Offline

Posts: 40

Thank You
-Given: 4
-Receive: 2


« on: January 22, 2014, 06:50:03 18:50 »

Hi folks,
I have a DC 12v motor Dunkermotoren

How do I connect the encoder to use?
How do I connect A K E C?
How to transfer this information to about 30 meters?

Tank's to all !


GearBox:
nr 88850 01206
36:1
Mzul 80 Ncm

Motor:
G30 2 42/94
88615 01500
12V 0.60A
2900 UPM

Encoder:
88710 04629
01 22

Logged
dotm
Active Member
***
Offline Offline

Posts: 179

Thank You
-Given: 81
-Receive: 75


$$$


« Reply #1 on: January 22, 2014, 07:19:42 19:19 »

My guess is that a-k will be the emitting LED and e-c will be the emitter and collector of the receiving phototransistor.

Try this: connect the emitter (e) to a wire and this wire with a pulldown resistor to ground (10k should do it)
connect a 5v source to the collector and measure with an oscilloscope at the e pin.

connect a 1k potentiometer (pre-set it to 1k) in series with a 5v voltage source to the LED.
get the motor running.
decrease the resistance of the potentiometer carefully until you see a squarewave at the e pin.

edit: before doing that, ensure that there is indeed a diode from a to k by measuring with the diode tester of your multimeter.
« Last Edit: January 22, 2014, 07:21:53 19:21 by dotm » Logged
zab
Active Member
***
Offline Offline

Posts: 137

Thank You
-Given: 25
-Receive: 58


« Reply #2 on: January 23, 2014, 02:53:54 02:53 »

use the link to find what you are looking for
http://www.dunkermotoren.com/default.asp?id=16&lang=2
http://www.dunkermotoren.com/default.asp?id=9&mid=2&lang=2


encoder you are referring may be Tacho generator
see this
http://www.dunkermotoren.com/data/technical_data/servocomponents/pdf/TG.pdf#page=1

Any go through these pages to find your requisite information.
Logged
KIM-DU
Junior Member
**
Offline Offline

Posts: 40

Thank You
-Given: 4
-Receive: 2


« Reply #3 on: January 24, 2014, 08:51:21 08:51 »

Thank you for your's suggestions.

KIM-DU
Logged
Pages: [1]
Print
Jump to:  


DISCLAIMER
WE DONT HOST ANY ILLEGAL FILES ON THE SERVER
USE CONTACT US TO REPORT ILLEGAL FILES
ADMINISTRATORS CANNOT BE HELD RESPONSIBLE FOR USERS POSTS AND LINKS

... Copyright © 2003-2999 Sonsivri.to ...
Powered by SMF 1.1.18 | SMF © 2006-2009, Simple Machines LLC | HarzeM Dilber MC