Sonsivri
 
*
Welcome, Guest. Please login or register.
Did you miss your activation email?
March 29, 2024, 05:48:07 05:48


Login with username, password and session length


Pages: 1 2 [3]  All
Print
Author Topic: ICD-U40 - circuit and PCB  (Read 24701 times)
0 Members and 1 Guest are viewing this topic.
pama
Junior Member
**
Offline Offline

Posts: 74

Thank You
-Given: 10
-Receive: 28


« Reply #50 on: July 20, 2007, 02:12:52 14:12 »

thanks for feedback!
good luck
Logged
oyhan
Guest
« Reply #51 on: August 26, 2007, 01:15:30 13:15 »

Hi Pama and Dear Friends
May I get ICD-U40 schemetics and pcb file for any program like protel and other program.
Thanks..
« Last Edit: August 26, 2007, 01:17:23 13:17 by oyhan » Logged
adrian
Newbie
*
Offline Offline

Posts: 30

Thank You
-Given: 27
-Receive: 14


« Reply #52 on: August 31, 2007, 07:17:21 07:17 »

hi all,
the driver for the icd-u40 can b found here;
hope this http://www.ccsinfo.com/downloads/setup_usbdrivers.exe
and the driver for icd-s40;
http://www.ccsinfo.com/downloads/setup_icd.exe
hope this might help someone.
Logged
pama
Junior Member
**
Offline Offline

Posts: 74

Thank You
-Given: 10
-Receive: 28


« Reply #53 on: August 31, 2007, 09:03:13 09:03 »

sorry oyhan, but i don't plan to post the protel source files. i spend several hours to adjust and to test the circuit, and i'd like to keep for myself the possibility to modify and to improove this circuit.
But started to this point, you could easily modify and complete a new version.
best wish
pama
Logged
petarp
Junior Member
**
Offline Offline

Posts: 68

Thank You
-Given: 26
-Receive: 51


« Reply #54 on: March 13, 2008, 09:51:14 09:51 »

Hi. Anybody have a schematic for REAL ICDU40(with FW2.xx) and work with 3V devices?

Thanks.
Logged
hmakbarian
Newbie
*
Offline Offline

Posts: 7

Thank You
-Given: 3
-Receive: 0


« Reply #55 on: December 07, 2008, 08:14:27 08:14 »

hello every body
this files wich is attached here are not REAL ICDU40 and will not support pic j series.
please upload REAL ICDU40 schematic and firmware if its possible
Logged
arash_tah
Active Member
***
Offline Offline

Posts: 110

Thank You
-Given: 18
-Receive: 6


« Reply #56 on: July 16, 2009, 05:29:05 05:29 »

I confused please help
How to make a ICD-u40 programer/debuger
help me PLZ
1-schematic and pcb
2-firmware
3-PC driver if need
4-some note and guide about it

Posted on: July 16, 2009, 06:18:50 06:18 - Automerged

I confused please help
How to make a ICD-u40 programer/debuger
tell me PLZ
1-schematic and pcb
2-firmware
3-PC driver if need
4-some note and guide about it
Logged
MGLSOFT
Junior Member
**
Offline Offline

Posts: 69

Thank You
-Given: 32
-Receive: 73



« Reply #57 on: March 27, 2012, 04:18:04 04:18 »

hi,

sorry, somehow i wasn't able to login. Now it's ok, thanks Admin!
So, here is my board. I tested it and works fine, but i did it just for my fun. And i don't really know that it can help somebody.
When i prototyped, the Vpp generation wasn't so stable, but when i connect an ext. power supply it was working well. This was the reason why i introduced the maxim step up converter.
Also i propose to be able to run from the usb power, but also from an ext power supply, which is adjustable. In this way i think is independent from the usb power supply, and also can give power supply for the target board.
I made just these two little modification in the original circuit, and another one was the newest ft chip-RL, which is more advantageous than the older BM chip. Also i connected some leds to show whats happened.

but it's a challenge to build this board, because i used the rl chip with 0.65 mm pitch, and also if you loock carefuly, you have to solder under the component, wich is not so easy. But i solved with a really crazy idea, i'll comeback to this issue ,if you are inrerested.
I did it in protel99, but please don't ask for the sourse file.

so, after all, i think that is cheaper to buy an original one!

thanks and good luck,
pama

http://rapidshare.com/files/30709969/icd.zip.html
Links not functioning !!
Logged
Pages: 1 2 [3]  All
Print
Jump to:  


DISCLAIMER
WE DONT HOST ANY ILLEGAL FILES ON THE SERVER
USE CONTACT US TO REPORT ILLEGAL FILES
ADMINISTRATORS CANNOT BE HELD RESPONSIBLE FOR USERS POSTS AND LINKS

... Copyright © 2003-2999 Sonsivri.to ...
Powered by SMF 1.1.18 | SMF © 2006-2009, Simple Machines LLC | HarzeM Dilber MC