Sonsivri
 
*
Welcome, Guest. Please login or register.
Did you miss your activation email?
March 28, 2024, 03:35:30 15:35


Login with username, password and session length


Pages: [1]
Print
Author Topic: cool way to make pcb  (Read 6115 times)
0 Members and 1 Guest are viewing this topic.
user112
Junior Member
**
Offline Offline

Posts: 85

Thank You
-Given: 6
-Receive: 139


Salut tuturor(hello to all)


« on: September 03, 2007, 03:53:30 15:53 »

If you wish to make pcb better and you have an old inkjet printer try this
http://techref.massmind.org/techref/pcb/etch/directinkjetresist.htm
or for laser printers
http://max8888.orcon.net.nz/pcbs.htm 
but need special paper
Logged
avralam
Active Member
***
Offline Offline

Posts: 140

Thank You
-Given: 153
-Receive: 30


« Reply #1 on: September 03, 2007, 06:02:52 18:02 »

For ´special paper´ U can use example thickness sheets from old Elfa catalog. Or any paper partially glossy , partially mat. And from old magazines too. Tested : laser printer LBP-810 , iron Tefal in maximum temperature. Time ironing 2-3 min, no press hard.
 0,25 mm TTSOP package for CY27EE16 can use, no problem.
Logged
cae
Guest
« Reply #2 on: September 06, 2007, 12:27:39 00:27 »

I have tried all types of media for laser iron on method, and by far the best results obtained are with Press-N-Peel PCB transfer film (PNP-BLUE).
Have done many fine trace SMD boards with this product, and not one bad board.
Logged
jezo
Newbie
*
Offline Offline

Posts: 27

Thank You
-Given: 37
-Receive: 13


« Reply #3 on: September 07, 2007, 12:10:23 12:10 »

Hallo, I use colored papers for children. This paper is A4 format and has "water" glue from bottom side (like a post stamp). I printing on the glue side. In the end ironing, paper is unstick from pcb very lightly (underwater). Paper is very cheap, but I don't know, if it's reasonable in other countries.
« Last Edit: September 07, 2007, 12:15:24 12:15 by jezo » Logged
bbarney
Moderator
Hero Member
*****
Offline Offline

Posts: 2430

Thank You
-Given: 405
-Receive: 545


Uhm? where did pickit put my mute button


« Reply #4 on: September 08, 2007, 04:48:59 16:48 »

Jezo can you tell me more about this paper,it's sound's like it 's ideal for pcb's
Logged

Ever wonder why Kamikaze pilot's wore helmet's ?
jezo
Newbie
*
Offline Offline

Posts: 27

Thank You
-Given: 37
-Receive: 13


« Reply #5 on: September 09, 2007, 07:26:14 19:26 »

This paper is like paper adhesive tape, but with large size. It is producing in Czech republic, link is here:

http://www.stepa.cz/gb/index.html  [Products -> Coloured adhesive papers]

And here is link with instruction to make pcb:

http://hw.cz/Teorie-a-praxe/Dokumentace/ART1286-Vyroba-DPS-nazehlenim-toneru.html

It is also in czech language, but there are many pictures (article is not my).
Logged
user112
Junior Member
**
Offline Offline

Posts: 85

Thank You
-Given: 6
-Receive: 139


Salut tuturor(hello to all)


« Reply #6 on: September 11, 2007, 01:22:00 13:22 »

a few people recomand this paper if you find it
http://tinypic.com/ht8jth.jpg
Logged
forter
Active Member
***
Offline Offline

Posts: 136

Thank You
-Given: 985
-Receive: 26


« Reply #7 on: September 11, 2007, 02:54:58 14:54 »

I have wrote in thise forum, i am using old photopaper, printing on photo sensitive side. After warming with ordinary iron, place the plate in hot water. 2 minutes and very good plate is ready for FeCl3. Active layer photopaper contain "jelatin" (i don't know English term for it) and in warm water it increse his volume, because we have no problem in seperating a paper from foil.
Logged
user112
Junior Member
**
Offline Offline

Posts: 85

Thank You
-Given: 6
-Receive: 139


Salut tuturor(hello to all)


« Reply #8 on: September 12, 2007, 09:25:23 21:25 »

--who want more:   Computer-Controlled Drilling and Milling
http://www.fullnet.com/~tomg/gooteecn.htm
http://storm.ca/~rheslip/cnc.htm
---new info for laser method http://www.fullnet.com/~tomg/gooteepc.htm#1
----and others http://www.technologystudent.com/pcb/pcbdex.htm
Logged
xxtigerxx
Newbie
*
Offline Offline

Posts: 13

Thank You
-Given: 3
-Receive: 1


« Reply #9 on: July 14, 2008, 10:36:42 10:36 »

You tube videos how to PCB etching

PCB etching with inkjet picture paper
http://www.youtube.com/watch?v=snileUK7PQg

Make Your Own Printed Circuit Boards on a Laserjet!
http://www.youtube.com/watch?v=urv6jArKp6M&feature=related

How To Etch Your Own Circuitboards
http://www.youtube.com/watch?v=Vlui7s4lj7g&feature=related

:-)
Logged
notes5
Hero Member
*****
Offline Offline

Posts: 698

Thank You
-Given: 173
-Receive: 971



« Reply #10 on: October 18, 2011, 08:37:07 08:37 »

I'm finding this article...

- http://hackaday.com/2011/10/17/modding-an-inkjet-for-pcb-production/

I think is interesting for more people.

73...
Logged

Notes5 isn't the original uploader, only a seeker...like a spider.
Pages: [1]
Print
Jump to:  


DISCLAIMER
WE DONT HOST ANY ILLEGAL FILES ON THE SERVER
USE CONTACT US TO REPORT ILLEGAL FILES
ADMINISTRATORS CANNOT BE HELD RESPONSIBLE FOR USERS POSTS AND LINKS

... Copyright © 2003-2999 Sonsivri.to ...
Powered by SMF 1.1.18 | SMF © 2006-2009, Simple Machines LLC | HarzeM Dilber MC