The Godfather talking
This is god damn my place! Capisci?
Sonsivri
 
*
Welcome, Guest. Please login or register.
Did you miss your activation email?
March 29, 2024, 03:31:40 15:31


Login with username, password and session length


Pages: [1]
Print
Author Topic: Forum "order" - no direct [REQ] section for un-patched/RE'd apps...  (Read 3614 times)
0 Members and 1 Guest are viewing this topic.
T.A.G. TEAM
Guest
« on: November 14, 2010, 02:03:34 14:03 »

I am at a bit of a loss here. I can see from a couple days of reading here the following:

1) Plenty of things being freely distributed; what "shares" could I possibly provide that would not be leeches or duplicates?

2) There is no specific forum section to inquire about reverse engineering products, unless that is reserved to the "elite" SCG (crackers group.)

3) It would appear those active in the scene today and active here get inundated by the normal idiots that appreciate little but what app they want and as well have zero conception or appreciation as to what goes into providing it for them (patches, cracks, RE, etc.) -> It has ALWAYS BEEN THIS WAY from my experience...

In a nutshell, I cannot find an over abundance (actually nothing I have that is current these days...) of anything that is not or could not already be available here or elsewhere - and it is absolutely retarded to spend the hours involved for some of these RE projects if they have already been covered (properly.)

I searched for "crack request/(s)" as well as [REQ] and found more issues between the scene community and users than any actual valid requests I don't already know are available. Have I missed out on the area that has current relevant requests for apps of value that clearly have never CLEANLY been RE'd?

I like this forum - Admins and Mods (and users too) you should be proud of it, but with a pile of time on my hands and not a lot of bandwidth, I can only see my (albeit dated) skills of any service to the forum if there was a concise place to find what truly is needed. (IE - some are silly enough to request a crack for ADOBE CS5 - WTH???)

I won't ask about joining the SCG directly as it seems pointless as you people do not know me from Adam and my "handle" is not what was ever used in past to do such work.

As a sidebar, while I have Admin'ed forums of even larger size than this, I cannot help but feel as if I am walking on egg-shells here posting anything but links which I have not the bandwidth for and frankly in today's World, plenty are available. -> I am already frightened of this post - I'd like to feel I should not be...

Would someone in the know, perhaps from the SCG reply with a list of apps of great interest to the community here; for after several days of reading here, I can see only one function I might provide and that is in RE, not posting shares (or often what appears the case...) re-posting links to apps/cracks/keygens/patches that either already exist or are abundant EVERYWHERE on the www... I may have plenty of time on my hands, but with the tremendous time investment many of these projects take, I'd rather not return to doing such things if they are an exercise in futility. And BTW, after reading the SCG thread, I can say that a good portion of folks out there are, and always will be truly ungrateful about what people in the scene do, if you cannot accept that, no offense, but you should drop out of the scene and not complain, for you likely should have been aware of the mentality of the masses when you started such activities - it comes with the territory.  Smiley

Many thanks for any guidance anyone might provide - don't think I broke any of the rules here in posting and I do not believe I stepped on any toes either, but that remains to be seen.

Regards,
T.A.G. TEAM
Logged
DreamCat
Senior Member
****
Offline Offline

Posts: 284

Thank You
-Given: 223
-Receive: 116



« Reply #1 on: November 23, 2010, 08:58:15 08:58 »

a specific forum section is need I think.
Logged

May be I expressed the wrong meaning, sorry for my bad english. Please correct it for me if you can.
T.A.G. TEAM
Guest
« Reply #2 on: November 23, 2010, 12:37:39 12:37 »

a specific forum section is need I think.

Thank you. I essentially had given up on trying to target my work to help the community here. I sort of felt (and do feel) like if no one here has any wants or desires and wishes to speak up about them in order for me to target my work on particular applications, why bother? I will work on what suits me and leave the community here to their own devices; they can dig for my work amongst the scene if they are 1) So inclined or, 2) I even work on anything that might interest them - with no requests, I shall put effort into my desires, not anyone else's; here or elsewhere... This is why I polled the Admins, Mods and SCG about such things. Such is life, this communities loss, not really mine...

No offense meant by all of this in the least, but while I may be talented at a great deal of things, ESP is not one of them... :-)
Logged
pickit2
Moderator
Hero Member
*****
Offline Offline

Posts: 4639

Thank You
-Given: 823
-Receive: 4194


There is no evidence that I muted SoNsIvRi


« Reply #3 on: November 23, 2010, 02:40:14 14:40 »

In answer to your fist post in this topic, my thoughts not Admin or any other Mods
1. (Plenty of things being freely distributed) we are mainly Elcetronic Group and as such most apps are cracked.

2. (There is no specific forum section to inquire about reverse engineering products, unless that is reserved to the "elite" SCG (crackers group.) yes like all cracking groups all new membership is by request of members. SCG in not very active at this time as a group. some members still post in thier area of intrest. So SCG is not looking for new members.

as for reversing tools there are quite a few sites that have the latest range, with unpacking scripts, so if its tools you need look there.
There is a few independent cracker in here too, I have tried to have an open cracking topic started in the past, but the ones I spoke to just wanted to do to for themselfs, not in a group. anyone who wants to start such a topic, I beleive would get the support of admin and the mods.
I sticked a tools topic in >Sonsivri > Computers > Software and Tools and there was no intrest shown.

3. (It would appear those active in the scene today and active here get inundated by the normal idiots) You will always get this, look at some in here asking for say "they have released version 4.1.3 and the crack for version 4..1.2 don'y work) that is why SCG is not so active maybe.
I could post a long list of our cracks that have been reposted in here to.

Now as to who you are? You have yet to say what intrests you, Electronic / Computer sceen.
Yes I seen your post in here and you say you polled Admin and Mods, I never got polled, unless I was drinking at the time.

Remeber you, You are free to start any topic that you want.

Logged

Note: I stoped Muteing bad members OK I now put thier account in sleep mode
T.A.G. TEAM
Guest
« Reply #4 on: November 23, 2010, 03:29:59 15:29 »

OK friend and I did start such a topic here.

I guess I should have quoted your post, but would have needed quote two and that would have gotten silly.

I think you miss-understood. I never asked the SCG to learn how to reverse engineer protection schemes, make patches or any such thing. I did say my work in this area was a bit dated, I DID not say I needed anyone to hold my hand in doing the work, I simply asked (paraphrasing...) "What is it that people here would like the most; how may my skills and services be deployed the best?" and got little to no interest.

I do know that this is an electronic based forum and as such would not have asked what applications are of the most interest to people if I did not think they would be in that genre. Pointless for me to dick around with MAYA 2011 Electrical when colleagues did that work years ago, but since I "use what I use" with regard to my own R&D, scientific, electronic development software and other titles, I neither have the time nor inclination to research what every piece of software is out there that I do not use and then refer back here and elsewhere to see if a clean, unpacked, patch or keygen is available. That is time better spent making said items... Or drinking that beer you spoke of...

Cracking - or in this PC World, I prefer reverse engineering, is sort of like riding a bike, things change, but the essence of all of it NEVER changes. Besides, anyone can do it, the "good" manufacturer's out there throw entirely new crap at us every go around, so often with very high-brow apps it is like learning all over again anyway...

Yeah, just was asking in the appropriate area if we could get a simple [REQ] section. As for polling the Admins, Mods, etc, well I cannot even PM anyone; and God forbid I post something that adds to my post count LOL... Eggshells, kind of silly, but they must have had more problems than I have seen in even larger forums I built... (Though really, it was crap like that in the end that led us to end every one of those former projects...  Smiley

Thanks for commenting Sir... Time will tell where my time is spent and doing what exactly...
Logged
Ichan
Hero Member
*****
Offline Offline

Posts: 833

Thank You
-Given: 312
-Receive: 392



WWW
« Reply #5 on: November 23, 2010, 04:47:54 16:47 »

How about ArtCAM 2010?

http://www.sonsivri.com/forum/index.php?topic=30978.0

I believe some people in here waiting for it.

-ichan
Logged

There is Gray, not only Black or White.
T.A.G. TEAM
Guest
« Reply #6 on: November 23, 2010, 08:56:54 20:56 »

How about ArtCAM 2010?

http://www.sonsivri.com/forum/index.php?topic=30978.0

I believe some people in here waiting for it.
-ichan
See my post, I have a few things on my plate at the moment, but if the .exe is OK, I'll try and take a look when I have an opportunity. Thanks for posting :-)


Logged
Pages: [1]
Print
Jump to:  


DISCLAIMER
WE DONT HOST ANY ILLEGAL FILES ON THE SERVER
USE CONTACT US TO REPORT ILLEGAL FILES
ADMINISTRATORS CANNOT BE HELD RESPONSIBLE FOR USERS POSTS AND LINKS

... Copyright © 2003-2999 Sonsivri.to ...
Powered by SMF 1.1.18 | SMF © 2006-2009, Simple Machines LLC | HarzeM Dilber MC