Proteus ISIS Question

[Wizpic]

I've really once used ISIS for Simulating PIC'S in the past or simple things that just require a DC votlage, Now I'm working a project where I need to simulate a AC output then put through a bridge recifier, I've tried a few ways to create but don't seem to be progressing any where, I just need 2 x 12V in series to make 24V then have a center tap for 12V

I'm sure it can be done if so would I be able to use the scope to measure the ripple ect, If not the scope part is not to important has this can be done in real time at a later stage

Wizpic

[pickit2]

You can play with this. It is should be simple, to do what you want.
with Proteus you will need to tweek the A/C voltage just putting the value of 12V in the VSINE part,
it will not add the RSM Value, and will show as 8V5 (V1).
So you need to put the A/C Voltage at about 17V and then it will display as 12V as in V2.

[Wizpic]

I will try it, I'm off to get the later version has this PC only 7.4 on it

I will let you know how I get on

cheers