CCS-4.084

[sysypet]

Hello guys!

Here is the CCS compiler ver: 4.084.

Best regard.

sysypet


http://rapidshare.com/files/176228329/CCS_4.084.RAR

[samir_1982]

Hi

2,Copy the license files there!

I not found this license file.
pls share license file
tnx

[praksk]

Please go through install_nfo. The license files are available in the archive.

[ajak]

Read the instruction please.. It is very easy to do..

[sonsivritwchen]

The rapidshare is very very slow, could someone upload to other sites. Please.

[samir_1982]

OK
Best regard
tnx

[spasbyspas]

CCS_PCWHD v4.084
Other link:
http://ifile.it/9ny4uli

[ajak]

The rapidshare is very very slow, could someone upload to other sites. Please.

Here it is, for those who cannot download in rapidshare...

http://ifile.it/9ny4uli/ccs_4.084.rar

[preatorian]

Hi all,
here is another mirror:

http://www.mediafire.com/file/jtyxvzumtnh/CCS_PCWHD_v4.084.RAR

[duende_azul]

With this keygen generate customized licenses..

http://rapidshare.com/files/176409172/Key_pcwhd.exe

[FriskyFerret]

Did you test that the keygen can create a valid license for v4.084?

[preatorian]

Hi all,
I installed it over the previous version 4.074 and the existing reg files are doing great job.

Regards

[sfabris]

Hi all,

finally PCWHD == we can build also on dspic and pic24.
I was missing this!

Thanks,

sf

[LithiumOverdosE]

I tried installing this version over previous 4.074 PCWHD and it downgraded it to only PCW. Then I deinstalled everything, cleaned up registry and made a fresh install using provided license files. It also reported PCW version.

Are you sure this is PCWHD version at all? It sure looks like it's a PCW...

[yahoo]

Are you sure this is PCWHD version at all? It sure looks like it's a PCW...

After the installation check HELP -> ABOUT and you will see what compiler versions are installed. For me - all changed from 4.074 to 4.084. For sure it is a full update!

[praksk]

I tried installing this version over previous 4.074 PCWHD and it downgraded it to only PCW. Then I deinstalled everything, cleaned up registry and made a fresh install using provided license files. It also reported PCW version.

Are you sure this is PCWHD version at all? It sure looks like it's a PCW...

I tried a PIC24 project and it works.

[pc04]

hi,
working ok for me
thanks pc04

[LithiumOverdosE]

Yeah, I know all versions got updated to 4.084 but the overall version is PCW and not PCWHD. I tried fresh install on other PC and the same result was achieved- it is a PCW version. I say so also at the top of the screen. Same thing happens when I used keygen. With the 4.074 version everything is fine and it registers as PCWHD.

[duende_azul]

Did you test that the keygen can create a valid license for v4.084?

Yes I test and work fine.

Yeah, I know all versions got updated to 4.084 but the overall version is PCW and not PCWHD. I tried fresh install on other PC and the same result was achieved- it is a PCW version. I say so also at the top of the screen. Same thing happens when I used keygen. With the 4.074 version everything is fine and it registers as PCWHD.

This version is PCWHD, I installed over a previous version (4.074, and in "about dialog box" appears PCD compiler.

[LithiumOverdosE]

Hm, now that's strange. It really does say PCWHD in the About box. However top status bar still shows only PCW. However it does compile dsPic projects so I guess it really is PCWHD.

[mitsos]

hi

just look at the Devices folder of the installation.
Are there files for dspics?
Are you try to compile a simple program with any type of the supported dspics?
Both answers are yes, so don't discuss anymore for this last version PCWHD.

regards
mitsos

[Dembo]

Hi All

On 4.084 ICDS doesn't work - can't connect to ICD  (tested with Microchip ICD1, 20MHz/40MHZ modified) - it was OK with 4.078
Any idea? Does  someone have also such problem?

[mitsos]

hi

I agree, in the mplab simulator for dspics is working ok, I have problems when I try the simulation in proteus.
So, it's a little bit confussing if the compiler supports, like the previous 4.068 version, the dspics.

I waiting any comments that clear this topic.

regards
mitsos

[kiashee]

Hi...
I just intalled this version over my 4.074 which was fixed by the keygen from 4.068. it worked fine for me. PCWHD were all updated.

[pama]

Hi,
on this new version 4.084, the ICD stand alone soft. is not working with my icd clone (serial with the ftdi converter). I get something 'wrong response from the ICD unit..'
But is stil working without problem on PCW environment!
So there are some changes on the ICD software.
I'm also interested to know the reason.

[preatorian]

Hi all,
I face the same problem with ICD not working. I just downloaded the ICD software only from their site http://www.ccsinfo.com/downloads/setup_icd.exe and installed it in the PICC directory. It is working fine now.

Regards

[pama]

Hi,
agree with you, Preatorian! and thanks! Downloaded the ICD control program and installed in the pic directory, and now it's like working normaly.
So, i have the ICD control soft. version V2.102 with ICD firmware 1.39 rev #160 for PIC 16 and PIC 18 running well.
best wishes

[xzb]

this version seem no supporter (i2c_poll())

[belinao]

i just compiled a pic24 program and it worked just fine...

thanks

[jaikumar]

Hi all,

Just compile the cdc usb code with CCS 4.084 and the ram usage was 68%

and i compiled the same program with ccs 4.032 and the ram usage was 46%

Whats going on?

Regards,
Jai

[mayler]

What PIC are you using? If I use 18F4550 my RAM used is about 57% with almost no code... (50% of USB RAM + 7% overhead). Remembers me old days when in PCs RAM was precious and onboard videos eaten our MB of RAM.

[jaikumar]

I am using the 18F2550, compiling with ccs-4.032 gives same perfomance as compiling with ccs-4.084 and takes less RAM.

CCS has a way of creating problems with their fixes as the version numbers goes up.

Anybody who understands this please explain.

Thanks and Regards,
Jai.

[mayler]

Did you check if the pic18_usb.h usb.h and usb_cdc.h have changed? Maybe they modified the file and put new things. Make a compare to see. Maybe in previous version they didnt allocate all usb memory, probably generating a bug.

Regards

[jaikumar]

well it works and i did not get any error, so far.

regards,
Jai.

[jaikumar]

Question asked about RAM size is answered below,

Once again CCS has created problems with their update of compiler and there is a new patch

Version 4.085 fixes:

4.085  A number of optimization issues on 24 parts have been fixed
4.085  A PCW IDE problem invoking the ICD software due to the CRC is fixed

These may be the reason why RAM size is bloated with 4.084.

Please don't use this version. Wait for 4.085.

WHO KNOW WHAT ERRORS MAY BE CREATED ON 4.085

Regards
Jai.

[mayler]

Version 4.085 fixes:

4.085  A number of optimization issues on 24 parts have been fixed
4.085  A PCW IDE problem invoking the ICD software due to the CRC is fixed

What this have to do with USB in 18F4550?
I´m only seeing 24 parts improvement and ICD fixed.

There´s time i dont see any update with PCH or 18F.

[saint]

Hi everyone,
I'm having problems with the new version (4.084) of CCS. I uninstalled my older version and installed new one with provided keygen it works without any problem. But when i tried to use my ICD-U40 in CCS it doesnt work.

I also upgraded firmware of debugger and installed new wersion of ICD software...I dont know what is the problem...

P.S. ICD-40U works with standalone version of the ICD program anyway...

Any suggestions?

[mayler]

Hi everyone,
I'm having problems with the new version (4.084) of CCS. I uninstalled my older version and installed new one with provided keygen it works without any problem. But when i tried to use my ICD-U40 in CCS it doesnt work.

I also upgraded firmware of debugger and installed new wersion of ICD software...I dont know what is the problem...

P.S. ICD-40U works with standalone version of the ICD program anyway...

Any suggestions?

This version has a problem in ICD. In 4.085 ICD is fixed. Use the standalone version.
Source : CCS Forum.

[saint]

This version has a problem in ICD. In 4.085 ICD is fixed. Use the standalone version.
Source : CCS Forum.

Thanks for the information mayler...

I was almost going to be crazy to find the problem on ICD...Well, i hope 4.085 will be here soon...

[solarwind]

So is it possible to install the version posted here and simply download the updates straight from the CCS website after?

Posted on: March 02, 2009, 11:05:38 23:05 - Automerged
Update: you can't download the updates from the CCS website. Anyone have the latest updates?

Posted on: March 02, 2009, 11:24:28 23:24 - Automerged
Update: you can't download the updates from the CCS website. Anyone have the latest updates?

Posted on: March 02, 2009, 11:25:50 23:25 - Automerged
Damn - bad internet connection, sorry for double-post.

[aliveli]

i dont think this copy of ccs works properly
yes it does compile but it even copiles programs which have contain lots of errors
never shows warnings as well
use 4.057 instead of this

[mayler]

With me is working great, used to make my graduate thesis, made an adaptative control in pic.

[solarwind]

Yes, it is working great. But how do I update to the latest versions?

[mayler]

Wait someone to post here.

[ALLPIC]

Yes this also working great for me I don't know about CCS ICD40 because I am not useing that but it really works great I love MPLAB environment so I am using that for CCS No problem I observed yet

[savant26]

Hi,

You can see the last release number and full changes list from this link:
http://www.ccsinfo.com/cgi-bin/update.cgi?software=VERSIONS

[twonuts]

Yes, it is working great. But how do I update to the latest versions?

Try this., It worked for me. When it asks for a customer reference number, just stick any number in box and click next.
It says invalid reference number but downloads and installs updates.

Edit:

I don't know what exactly the online updater downloaded but it was NOT a compiler update. Apologies to all.

[mayler]

It's not working for me... If you discovered a system breach, download the last pcwhd and ideutils and post here

[MGLSOFT]

Yes, download the PCWHD and post here.
Not working for me too...

[The Puma]

This did't work to upgrade to newest version ...

[fonak]

To get this to access update I did the following
Download keygen posted in earlier post
http://rapidshare.com/files/176409172/Key_pcwhd.exe
Download CCS file from this link posted in earlier post
http://ifile.it/9ny4uli/ccs_4.084.rar
Fresh install of CCS
Use keygen to generate new license files.
Used online update from CCS program
When asked for reference number I enterer 12345465432
The update reported invalid reference number but downloaded a file, about 2Mb in size and installed this.

The CCS program still reports all versions of compiler as 4.084, so not sure what exactly the update was, but the program still works after this update session.

This not working

[softjad]

This not working

Try this:
http://rapidshare.com/files/176699920/pcwhd_4.084.RAR

[fic]

all links concerning ccs pic seems to be dead ,i think it is time Django should be at home

[Okada]

all links concerning ccs pic seems to be dead ,i think it is time Django should be at home

Did you check this thread? http://www.sonsivri.to/forum/index.php?topic=33138.50

[pickit2]

all links concerning ccs pic seems to be dead ,i think it is time Django should be at home

sorry your in a forum, not a rest room

Account on mute