warp13a

[Wizpic]

Has anybody got the latest exe and firmwear for pic as it'sall password proctected now :mad:
 
please share
 
wizpic

[stroma]

i'm looking for warp's firmware too.
anyone with newfound membership share please ...

[metal]

Hi

I got it all guys !!

But there is a problem any way....

A friend built it, when installed the software, and connected the programmer to his PC, the software asked for a license !!

I have the software & firmware, along with eagle design files, if any is still interested, let me know...

 C U

[Wizpic]

yes please i would like it very much
can you upload please

wizpic

[metal]

Hi WizPic

No need to send PMs in order to ask for some thing that I will upload for pulic benefit..


Good luck

[Wizpic]

:eek: Sorry Metal
 
Give me a slap on the wrist (och! that hurt)
 
i just got a bit carried away and over exticeted
 
cheers
 
Wizpic:cool:

[metal]

Ok man

No problem, No hard feelings....

[nimdonia]

metal, have u tried programming 18f4550.. wic firmware u have? i cant seem to program 18f4550,... c1 comms error,... need to drop vpp voltage? wat do u think.

[stroma]

Hi, im working on usb based w@rp13. it is all usb powered design based on ft232bm usb to com bridge chip. I thing that it will be a good ICSP picstart replacement. I got stable communication with mplab 7.20 but I have not programmed any pic’s yet … I have not much time to spend on this right now …

best regard
stroma

[Wizpic]

Stroma you gona share it with us

Metal any joy yet with zipping

cheers

wizpic

[metal]

Hi

I have already uploaded all files I got for Wrap13....

Wrap13 Files

The password for the rar file is: MetaL

Good Luck !

[Wizpic]

Nice one Metal but i can't seem to ge it it keeps taking to to the upload page i had this troubel ealier when i was trying to download anohter file from there strange

cheers

wizpic

[metal]

Hi

WizPic, you are really a pain in the ***, the link is working just fine....

[Wizpic]

Yeah I know i am and yes the link is working fine problem solved it was my end as i said i had trouble before even with some other files i wanted to download from another site but got it now

good job

wizpic

[Wizpic]

Metal
I'm gona piss you off even more :mad: sorry can you get the latest files firmware is 1.6(j) and exe is now on (n)
 
if not this one will be fine
 
cheers
 
wizpic:cool:

[stroma]

I have last free firmware 1.6 (g) here you are ..

Did someone try to disassemble firmware? I got quite messy asm output file and reassembled hex did not work. I’m trying to invert RS232 pins logic. This will eliminate the need of hardware invertors after /..and smaller PCB../ FT232BM USB<>COM bridge. It would be nice for my USB powered ICSP warp.

[sarco]

hi
warp13a latest version(n) plus (j) firmware +schematic
sarco

[Bacra2k]

The .sch file you can open with Eagle, it's the schematic file; and it works with all pics as claimed (i'd tested all 16XXX and 12XXX except 18XXX)

Salu2

[fuzuli]

The .sch file you can open with Eagle, it's the schematic file; and it works with all pics as claimed (i'd tested all 16XXX and 12XXX except 18XXX)

Salu2

Please send if you have pcb for warp13.... thanks

[Bacra2k]

Here is the pcb file in Eagle format


Salu2

[fuzuli]

Dear bacra2k;

Thanks pcb for warp13....

[sarco]

hi
the warp-13a pcb has awrong connect i  will post acorrect one soon plz wait
sarco

[sarco]

hi
This is the correct warp13a brd tested
sarco

[stroma]

sarco,
thank you, for latest firmware & software. I hope it will be updated regularly in this forum

[metal]

Hey Beserk

I solved the 285 error problem, you can open the files now....

[sarco]

hi
the version i have posted is the latest due to this link  http://www.newfoundelectronics.com/downloads.htm
but if you want you can use the 16f876a with another firmware i will post it here next time
sarco

[sarco]

hi
this is the 16f876a firmware for warp13a comptable with my post tittled  the correct brd for warp13a
sarco

[Wizpic]

theres new warp13 exe file warp13.exer(o) can some one upload pleease
 
wizpic

[[email protected]]

hai
i am from coimbatore, tamilnadu
i got pdf for this pcb
if u want pls send me a pm

by

[[email protected]]

hai beserk

or u do onething u just send your address to me
i will send you the pcb

[picstart]

i am trying to build this programmer. Can someone tell me what are the components indicated by the arrows in the figure?
Can the resonator be replaced with a crystal?

[Wizpic]

One at the to is a push to make button (restets the programmer)
the one at the bottom is the round black thing) is a 1.5amp bridge rectifier
 
hope this helps
 
wizpic

[Faros]

I confirm what Wizpic said.... the reset is indicated on the PCB and the I/P voltage is 12 v AC , so the rectifier is needed …

A lot of info about WARP13A can be found in this page ..

http://www.newfoundelectronics.com/warp-13a.htm

[pl4tonas]

Hello people, The new version of Warp13.exe (o) is here:

Code:

  [url=http://rapidshare.de/files/10442687/w13o.rar][color=#0000ff][url=http://rapidshare.de/files/10442687/w13o.rar]http://rapidshare.de/files/10442687/w13o.rar[/color][/url][/url]

 
have a nice day.

[picstart]

Thank you so much pl4tonas.Do you have the lates hex file also ..i.e 1.7 ?


ps: the passwd of above file is pl4tonas

[pl4tonas]

First, my appologies for forgetting the password and my thanks to picstart who posted it.
The password is "pl4tonas"
 
About the hex file, sorry but I dont have anything newer than 1.6j.  I think there is no 1.7 available yet.
 
When something comes to my hands I will try to post it.  In case I forget again the password, this sould be tha same as before.
For those that I caused inconvinience, please forgive me.
regards
P.

[picstart]

Check out http://newfoundelectronics.com/gold%20members.htm
They do have firmware v1.7 for gold members.

[picstart]

I built this programmer using the pcb/schematic  posted in this thread. But I'm getting lot of program errors after I burn a hex file. Also the red LED isn't glowing- btw when is it supposed to glow?

[picstart]

When i try to program PIC 18f452 using my self-made warp 13 programmer ( latest firmware and software) I get program word errors on verifying.




Someone please help :confused:

Thank you!

[kevin0204]

Try this,
 
http://rapidshare.de/files/10976448/warp13a_pcb-ok.pdf

[kevin0204]

http://rapidshare.de/files/11009712/lastest.rar
 
pw is filename

[Wizpic]

Dam good work Kevein thanks for sharing  
 
we are all grateful to you does this work with the standard software which is o i think
 
cheers
 
wizpic

[picstart]

Thanks kevin for latest hex file.
What about my problem...if anyone has any idea:confused:

Please!!!

I used the same pcb but without the extra ground copper ! does it make any difference.

Btw the input is 16v in some circuits and 12v in others...??!!

[tdsnet]

hi, picstart

If you use the same pcb , check components.

Some pcb uses 12v AC with bridge rectifier (12*1.414=17v)  other pcb uses 16-18 VDC.
At 7805(pin3) you must have +5V. (for pin20 of f252)
At 7815(Pin3) you must have +15V

[Wizpic]

Kevin
what it you design your pcb in have you got the gerber files
and the working schematic you made it from theres that many flying around not sure which one is which
 
can you opload what you have got
 
cheers
 
wizpic

[kevin0204]

Kevin
what it you design your pcb in have you got the gerber files
and the working schematic you made it from theres that many flying around not sure which one is which
 
can you opload what you have got
 
cheers
 
wizpic

http://rapidshare.de/files/11097547/warp13_A.rar
 
several eagle schematic and pcb file from internet (here and other site)
but this one is 100% work.
i don't know who designed this file. i am only modify wire size.

[selim]

HI kevin
 
Please i try pass: filname or lastest   for the file lastest.rar  but no success
please i want the pass for this file
 
Thank you in advance

[mmengi]

hi selim,
 
Password is "lastest.rar"

[stroma]

Hi guys,
I’m experimenting with usb powered icsp warp13. schematic is on the links below …
http://icd2.narod.ru/w13usb1.jpg
http://icd2.narod.ru/w13usb2.jpg
What you think about this idea?
Any suggestions and/or error correction are welcome!

[nimdonia]

hi guys, can soemone repost the lastest.rar... need latest firmware... link to rapidshare says tht it had been deleted... thnx

[[email protected]]

hai
 
those two winrar files were not exist pls repost it
with regards

[aamir]

HELLO ,

 Please upload schametic and PCB for WRAP13A in orcad as i have not work on

Eagle thanks.

[adrian]

sigh... im getting failled programming as welll... n i cant seem to burn the 252 chips... plenty of errors... anyone has a fix to this?

[platonas]

The bluePole 1.7a firmware file is on

Code:

http://rapidshare.de/files/35714923/bp1.7a.rar

pass is pl4tonas

[mizk_electro]

Kevin
what it you design your pcb in have you got the gerber files
and the working schematic you made it from theres that many flying around not sure which one is which
 
can you opload what you have got
 
cheers
 
wizpic

http://rapidshare.de/files/11097547/warp13_A.rar
 


several eagle schematic and pcb file from internet (here and other site)
but this one is 100% work.
i don't know who designed this file. i am only modify wire size.

Kevin,

Can you upload the schematic too ... because to change the Vdc (12V) connector.

Thanks

[DieSPeeK]

Hi platonas,
Could you upload WARP13.EXE(o) software?
Regards

[pl4tonas]

yeap,
Here it is, only the warp13o.exe file

Code:

[url]http://rapidshare.de/files/10442687/w13o.rar[/url]

pass is pl4tonas

[Donovan]

Hello,

has anyone the schematic for the original Warp13a? I have some problems with my programmer and cannot get a connection to my pc.

Thanks

Donovan

[juliano barcik]

warp 13a ,pcb ,schematics,firmware
http://www.4shared.com/file/15084111/1fa41a3a/Warp_13a.html

[Donovan]

Thanks for the files

Donovan

[Ahmad_k]

Anyone Have the new bluepole 1.7.a firmware ? and an eagle file for the usb version please

[adrian]

I don't have the USB version. but I've seen it somewhere. It's just basically another circuit using the ftdi usb chip to replace the max232 circuit.
Anyway here's the bluepole 1.7.a firmware. Hope this would help someone.
http://rapidshare.com/files/52459407/w13_bp_17a.zip.html (http://rapidshare.com/files/52459407/w13_bp_17a.zip.html)
Hope i've helped.

[Wizpic]

anybody got the latest EXE file ?

cheers

wizpic

[pl4tonas]

Hello people,

The latest EXE file, version 1.9.8 (o) is here:

Code:

http://rapidshare.com/files/53820199/warp13_o.rar

no password needed.


The bluep0le firmware 1.7a is here:

Code:

http://rapidshare.com/files/43835626/bluepole1.7a.zip

again no password needed.

Regards
P.

[MAXPAYNE]

What is warp13a ?

What are the advantages

[simyaci]

What are the advantages

pic paralel port progremmer 16c57 vb.

[pl4tonas]

No Warp13a is not a parallel port programmer but a serial port one.

To see what are its features you can go to:

Code:

www.newfoundelectronics.com

where is the site of the manufacturer.

[jzaghal]

Hello my friends,

Can somebody share the latest version of firmware and software.

Thanks.

[hodahel]

Warp13 is a "DEAD" programmer i think...no more updates?

[Wizpic]

yes your right you need a user name and password to again access teh that web page

Sorry but I do not know it

wizpic

[pl4tonas]

The page is not accessible (www.newfoundelectronics.com) it give an error "403 Forbidden", You don't have permission to access / on this server.

It seems that either is closed down or a password is needed.

Anyway the firmware is in my Rapidshare folder (Blu3p0le 1.7a) as is the latest executable of the software (w a r p 13 O version)

I will lockate the setup file of the software and upload it some time later.

[jzaghal]

Hello,

Seems there is a new site in place of the old one.

Warp-13a seems to be discontinued, check:

http://www.dontronics.com/newfound.html

I like this programmer, only snag it is serial - based.

The programmer is mature with almost no problems, and you

can easily build a clone.

Cheers.

[Ahmad_k]

The Warp13 project is closed now

[Ahmad_k]

warp13 project is discontinued :-(

We know that the Warp13 project is discontinued. Read only my last reply.

[hhh4h]

So what is a good replacement?  I need something that works with microchip pics and serial eeproms

[Wizpic]

PICKIT2 from microchip they arecheap to buy, or do a search and you will get the info to build your own even have a look on google

wizpic

[hhh4h]

Built a parallel port based one long ago.  Warp was good with the integration into mplab.  Any experience with MElabs U2?  Uses a USB interface instead of serial and no external ps.

[madhan7710]

am using Winpic800 summer version and is working very great and it supports most of the pic chips am usinf.. the only problem in this version is I2C eeprom programming not working properly.. apart from that very best USB programmer. am using in my laptop also without any problems.