PWM RF control remote

[machine]

Hello guys, i try find pwm rf control remote circuit, but failed. Anybody know?

Thanks!

[dennis78]

Can you explain what you want exactly?

[Ikaros]

What do you want? Ready made project or you have a project not working?

PWM with PIC is quite easy. All you need is a resistor and a Capacitor to have clean DC output.

[LazBoy]

What do you want? Ready made project or you have a project not working?
PWM with PIC is quite easy. All you need is a resistor and a Capacitor to have clean DC output.

@signalcom

How can we generate 60 kHz PWM with 16F876 or 16F877 @20 MHz Clock ?
This is possible ?

[Ikaros]

For 78.12Khz you have to set Timr Prescaler  to 1, PR2 at 0x3F with mx resolution 8 bits. With 10 bits you will get max 19,53KHz only.

[titi]

This link can help you:
http://www.micro-examples.com/public/microex-navig/doc/097-pwm-calculator.html

To Have 60Khz with 20MHz,it give not the exact fréquency you want: (60240.96 Hz)
/*
 * PWM registers configuration
 * Fosc = 20000000 Hz
 * Fpwm = 60240.96 Hz (Requested : 60000 Hz)
 * Duty Cycle = 50 %
 * Resolution is 8 bits
 * Prescaler is 1
 * Ensure that your PWM pin is configured as digital output
 * this source code is provided 'as is',
 * use it at your own risks
 */
PR2 = 0b01010010 ;
T2CON = 0b00000100 ;
CCPR1L = 0b00101001 ;
CCP1CON = 0b00011100 ;

Best regards.

[machine]

Well, it would be a circuit that controlled a DC motor via RF using a PWM.Well, it would be a circuit that controlled a DC motor via RF using a PWM.

[Ikaros]

Here is a little utility that helps alot in PIC calculations from Steve Monfete.