Sonsivri
 
*
Welcome, Guest. Please login or register.
Did you miss your activation email?
March 28, 2024, 07:45:15 19:45


Login with username, password and session length


Pages: [1]
Print
Author Topic: Using Flowcode  (Read 6153 times)
0 Members and 1 Guest are viewing this topic.
mick the mend
Active Member
***
Offline Offline

Posts: 109

Thank You
-Given: 109
-Receive: 101


« on: August 04, 2008, 09:07:57 09:07 »

Can anyone help ?
I am trying to use Flowcode 3 with a Pickit2 progammer and I am having problems making the final chip actually work. The problem seems to be the config data being sent to the programmer. If I Import the compiled Hex into Pickit2 I get the message that says that there is no cofig data in the Hex file.
I am using a PIC16F628, have set the chip speed in Flowcode and included the config word into the config data box (0x3F70) before compiling.When I try the chip in circuit absolutely nothing happens.
What am I doing wrong or could it be something to do with the cra***d version of Flowcode?
Any help would be welcome.


Mike
Logged
venda
Junior Member
**
Offline Offline

Posts: 74

Thank You
-Given: 535
-Receive: 89


« Reply #1 on: August 04, 2008, 10:12:06 10:12 »

Hi,

go to the Matrix Multimedia user forum and read post from steve

http://www.matrixmultimedia.com/mmforums/viewtopic.php?f=5&t=4161

Regards
Logged
mick the mend
Active Member
***
Offline Offline

Posts: 109

Thank You
-Given: 109
-Receive: 101


« Reply #2 on: August 04, 2008, 09:35:45 21:35 »

I have followed all the instructions from Steve but still can't get it to work. I set the clock to internal clk with clock out and there ins not even a clock output. Is there any chance someone could look at the code and tell me where I am going wrong? or as a last resort actually write some chips for me that work in the real world.

Cheers

Mike
Logged
mick the mend
Active Member
***
Offline Offline

Posts: 109

Thank You
-Given: 109
-Receive: 101


« Reply #3 on: August 05, 2008, 10:49:55 22:49 »

Problem solved
Logged
Pages: [1]
Print
Jump to:  


DISCLAIMER
WE DONT HOST ANY ILLEGAL FILES ON THE SERVER
USE CONTACT US TO REPORT ILLEGAL FILES
ADMINISTRATORS CANNOT BE HELD RESPONSIBLE FOR USERS POSTS AND LINKS

... Copyright © 2003-2999 Sonsivri.to ...
Powered by SMF 1.1.18 | SMF © 2006-2009, Simple Machines LLC | HarzeM Dilber MC