Sonsivri
 
*
Welcome, Guest. Please login or register.
Did you miss your activation email?
December 04, 2016, 01:10:30 13:10


Login with username, password and session length


Pages: [1]
Print
Author Topic: GSM Controller  (Read 10541 times)
0 Members and 1 Guest are viewing this topic.
zokij
Senior Member
****
Offline Offline

Posts: 330

Thank You
-Given: 196
-Receive: 617


Nice time :)


« on: May 25, 2008, 09:00:08 09:00 »

GSM Controller


Introduction

GSM Controller is a device that allows you to control appliances using SMS messages. There are also 4 inputs for connecting sensors so the device will send an alarm SMS or even call you to report an alarm condition. The device draws very little current and is being powered by phone’s battery which is a great thing. Nokia should be constantly charged or supplied with some sort of external power for long term operation.

GSM Controller Thing has been successfully tested on:

   1. Nokia 7110 (19200 bps, 8 MHz crystal for PIC16F628A)
   2. Nokia 6210 (9600 bps, 4 MHz crystal for PIC16F628A)
   3. Nokia 6310i (9600 bps, 8 MHz crystal for PIC16F628A)

It should work on all DLR-3P Nokia phones with internal AT modem. These should work: 62xx, 63xx, 6210, 7110...
Cable used for this device is DLR-3P cable and it’s embedded on the same PCB with the GMS Controller.

Details about functionality of the device, hex ... are in a word doc document among link down

project link:
http://rapidshare.com/files/117433956/009.rar <-old dead link

new http://rapidshare.com/files/273239053/009.rar working link

pass:sonsivri
« Last Edit: August 31, 2009, 09:05:53 21:05 by zokij » Logged
axial
Junior Member
**
Offline Offline

Posts: 43

Thank You
-Given: 55
-Receive: 32


« Reply #1 on: June 12, 2008, 07:59:27 19:59 »

your projects are great (Actually you),
can you upload them to:
http://mihd.net/
thank you


http://mihd.net/h43ckd5

PW sonsivri
 Cheesy
Logged
charudatt
Active Member
***
Offline Offline

Posts: 110

Thank You
-Given: 47
-Receive: 69


« Reply #2 on: June 14, 2008, 07:55:56 07:55 »

More than the project I just liked the area which stated which phones were tested. For a long period of time I am looking for mobiles which support AT Command sets and did not find any one place which list's it all.

Do you have other Model no. and make which can support this project.

Thanks for the project anyways.

regards
Logged
meho
Newbie
*
Offline Offline

Posts: 18

Thank You
-Given: 1001
-Receive: 11


« Reply #3 on: June 15, 2008, 01:31:38 01:31 »


---> mihd :
sorry - "no such file"

miha

Logged
zokij
Senior Member
****
Offline Offline

Posts: 330

Thank You
-Given: 196
-Receive: 617


Nice time :)


« Reply #4 on: June 15, 2008, 05:17:02 05:17 »

---> mihd :
sorry - "no such file"
miha
Undecided  Huh
here is other link...
http://www.speedyshare.com/331411621.html
same pass

BTW:
whats your problem with dl Huh
this is tiny file
Logged
zokij
Senior Member
****
Offline Offline

Posts: 330

Thank You
-Given: 196
-Receive: 617


Nice time :)


« Reply #5 on: June 16, 2008, 02:56:18 02:56 »

Hi kahtan,
Quote
i need all your projects if possible (Zokij)  Smiley
i have problem with rapidshare

all my project... I have 2 x 300GB of data in archive with project and other stuff ...
I post only on member req .... if you need some project ask (other member too) and I will post ...
but all is to much .... and if you have problem with some share server just when req wrote which you like
for me is same usually I use rapid as fastest for dl Smiley

and again use thank you button if you expect from me to spend some time for you, you can do that ...
as you can see there are not you name:
Quote
Follow members gave a thank to your post:
nguyenthanhha, anemon06
For this post, 2 members gave a thank you!

In feature I will not post help to member which ignorance thank you button ...
Logged
zokij
Senior Member
****
Offline Offline

Posts: 330

Thank You
-Given: 196
-Receive: 617


Nice time :)


« Reply #6 on: June 17, 2008, 08:39:08 20:39 »

thank you again zokij,
i ment by all your projects, projects those you posted in this site,
actually now i need frequecy meter upto 50Mhz and ultra sonic range meter (if possible)
please upload them to
 mihd.net
thank you an advance


yes I will post that project during the night - and any other project at members req ...

Posted on: June 17, 2008, 07:01:39 19:01 - Automerged

@zokij

Are you TRAX?

 Roll Eyes .....  Undecided
no I am Garfield as you see on my picture - sorry if that is problem for you if I disappoint you,
but still if you need any kind of learning resource you are welcome
no serious matter why you are if you need some kind of help...



Posted on: June 17, 2008, 07:08:26 19:08 - Automerged

thank you again zokij,
i ment by all your projects, projects those you posted in this site,
actually now i need frequecy meter upto 50Mhz and ultra sonic range meter (if possible)
please upload them to
 mihd.net
thank you an advance


Here is your first req "frequency meter 50MHz"
with PIC16F84


documentation + asm + hex:

http://mihd.net/m8g9edq
or:
http://rapidshare.com/files/123138943/036.rar
pass:sonsivri

Posted on: June 17, 2008, 08:06:40 20:06 - Automerged

At member req: Ultrasonic Range Meter with PIC16F873



complete project Hardware, Software, explanation
on link:
http://www.hobby-elec.org/e_pic6_6.htm
Logged
zokij
Senior Member
****
Offline Offline

Posts: 330

Thank You
-Given: 196
-Receive: 617


Nice time :)


« Reply #7 on: June 18, 2008, 07:37:27 07:37 »

No problem with me...but i think you should remove the word "MY PROJECT" in your post if it's NOT your work...

Rhonn

If you really read my post you can see I not use world "MY PROJECT" and never write that was my work
(BTW project is not my but work... if i found on the net and prepare for samone perhaps it is som kind of my work)
and in project archive I not change source code or any where put my name or nik .... 
only in message where I reply to kahtan req for all my project I told that I have 2 x 300GB of archive ...
its normal I work with electronic 25 years ...
I don't post my project because its industry test equipment not small project which many members have interest or need ... and yes I have asm code of trax project but I not post that code only hex...
that project is public from :

at : http://www.infoelektronika.net/article.php?id=90 (Serbian language)

IF you try to download archive which I post 009.rar you can see :
Notice: This project is FREE. Please do not sell the built device.
and:
Autor : Muris Pucic Trax
there are no my name or word this is my project!!! on other post is same....

I will try next few day read your post and project which you post,
and if you have time try to read my post and your to and see difference,
usually I post to members learning resource and usually I dont req ....
« Last Edit: June 18, 2008, 08:19:41 08:19 by zokij » Logged
hodahel
Junior Member
**
Offline Offline

Posts: 90

Thank You
-Given: 100
-Receive: 5

Catch me...


« Reply #8 on: June 18, 2008, 09:13:48 09:13 »

Hi kahtan,
all my project... I have 2 x 300GB of data in archive with project and other stuff ...
I post only on member req .... if you need some project ask (other member too) and I will post ...
but all is to much .... and if you have problem with some share server just when req wrote which you like
for me is same usually I use rapid as fastest for dl Smiley

and again use thank you button if you expect from me to spend some time for you, you can do that ...
as you can see there are not you name:
In feature I will not post help to member which ignorance thank you button ...

You are not aware of that? forum members will be mislead to believed it was your project..

you can say "MY CIRCUIT COLLECTIONS or MY PROJECT COLLECTIONS" that sounds better...
Logged
zokij
Senior Member
****
Offline Offline

Posts: 330

Thank You
-Given: 196
-Receive: 617


Nice time :)


« Reply #9 on: June 18, 2008, 10:06:17 10:06 »

probably you have problem, but with language....
he ask me for my project !!! And my response was for my project on my HD not on forum !!!!
I not write on post "this is my project" or "I post here my project"
As I see in your country official language is Filipino and English... I cant write Filipino but please make a effort read English....
Anyway as I wrote on post before try to read all my and your post and you will see...

BTW most of your post is " I need " , "Thanks a lot" , "Please upload again" and some " Anybody has " HuhHuhHuh?
I haven't post like "I need" , "Anybody has" or ask for registry key, corporate key, sourcecode....
If after this you still couldn't understood sorry ...I cant help you...

and if you don't like my post don't use them, I haven't more time for post like this ...
I am good with electronic and microcontroller not with psychology ...
Its all from me..
Nice time
Logged
hodahel
Junior Member
**
Offline Offline

Posts: 90

Thank You
-Given: 100
-Receive: 5

Catch me...


« Reply #10 on: June 18, 2008, 11:01:15 11:01 »

that's why i reacted 'coz i can read English...when you state "my project" it does not mean my project or other peoples project right? but "your project"

when it is in your HD still it is NOT your project but only your collection..got it?
Logged
zokij
Senior Member
****
Offline Offline

Posts: 330

Thank You
-Given: 196
-Receive: 617


Nice time :)


« Reply #11 on: June 18, 2008, 04:07:21 16:07 »

to "zokij " Kiss
thank you very much, Kiss
do you have frequency meter project with "PIC16F877 and C Code" ?! Smiley
Wink You are welcome  Grin
 Cheesy As usual I will try to digg it and post soon as possible during night...  Roll Eyes
Logged
sohel
Senior Member
****
Offline Offline

Posts: 437

Thank You
-Given: 140
-Receive: 124



WWW
« Reply #12 on: July 01, 2008, 03:33:41 15:33 »

zokij help us like gev and other hero. how many member in this forum coding himself ? our nature is take topology and copy paste. so dont answer unwanted questen. keep it up.

thnaks
Logged

A Thousand Miles Journey Start With a Single Step<br />http://www.youtube.com/user/masud58
zokij
Senior Member
****
Offline Offline

Posts: 330

Thank You
-Given: 196
-Receive: 617


Nice time :)


« Reply #13 on: July 02, 2008, 07:26:04 07:26 »

zokij help us like gev and other hero. how many member in this forum coding himself ? our nature is take topology and copy paste. so dont answer unwanted questen. keep it up.

thnaks

Thank you for all your world which make my day Smiley
sorry but this week I have some problem like sonsivri.com before few day.
two of my web portal in Hungary and Greece (tourist and travel support) have problem with PHP 3 transition to 5....
untill end of week I will be back with digging, support and posting.
I know what I promise to some member and I will do that Smiley
Logged
pelctronics
Newbie
*
Offline Offline

Posts: 24

Thank You
-Given: 8
-Receive: 11


« Reply #14 on: July 02, 2008, 02:26:46 14:26 »

zokij ,prijatelju nedaj se provocirati.:-)



 Sorry for my bad english,  Cheesy   

Pozdrav
Logged
zokij
Senior Member
****
Offline Offline

Posts: 330

Thank You
-Given: 196
-Receive: 617


Nice time :)


« Reply #15 on: July 09, 2008, 08:41:39 20:41 »

link is dead !

which one you need, here are few..
Logged
softjad
Junior Member
**
Offline Offline

Posts: 48

Thank You
-Given: 10
-Receive: 95


« Reply #16 on: July 10, 2008, 12:22:50 12:22 »

   
Someone has this project in  C code?
Thanks
Logged

pirvcb
V.I.P
Junior Member
*****
Offline Offline

Posts: 77

Thank You
-Given: 120
-Receive: 213



« Reply #17 on: August 10, 2009, 09:35:13 21:35 »

@ zokij

Can you repost GSM Controller link? Them are dead....
TIA
« Last Edit: August 10, 2009, 09:43:37 21:43 by pirvcb » Logged
linoko
Newbie
*
Offline Offline

Posts: 25

Thank You
-Given: 3
-Receive: 7


« Reply #18 on: August 11, 2009, 08:47:41 08:47 »

Hi friends,
please post the working link for the project, please if you have another interesting free projects with gsm post it.
Logged

Nothing is impossible
sadman
Active Member
***
Offline Offline

Posts: 231

Thank You
-Given: 717
-Receive: 688



« Reply #19 on: August 12, 2009, 06:24:02 06:24 »

GSM Controller


Introduction

GSM Controller is a device that allows you to control appliances using SMS messages. There are also 4 inputs for connecting sensors so the device will send an alarm SMS or even call you to report an alarm condition. The device draws very little current and is being powered by phone’s battery which is a great thing. Nokia should be constantly charged or supplied with some sort of external power for long term operation.

GSM Controller Thing has been successfully tested on:

   1. Nokia 7110 (19200 bps, 8 MHz crystal for PIC16F628A)
   2. Nokia 6210 (9600 bps, 4 MHz crystal for PIC16F628A)
   3. Nokia 6310i (9600 bps, 8 MHz crystal for PIC16F628A)

It should work on all DLR-3P Nokia phones with internal AT modem. These should work: 62xx, 63xx, 6210, 7110...
Cable used for this device is DLR-3P cable and it’s embedded on the same PCB with the GMS Controller.

Details about functionality of the device, hex ... are in a word doc document among link down

project link:
http://rapidshare.com/files/117433956/009.rar

pass:sonsivri


Friend can you upload it again thanks in advance

regards
sadman
Logged
zokij
Senior Member
****
Offline Offline

Posts: 330

Thank You
-Given: 196
-Receive: 617


Nice time :)


« Reply #20 on: August 30, 2009, 04:12:15 04:12 »

 Grin Here is new link for file 009 as your req Smiley



same pass as before
nice time  Wink

Posted on: August 30, 2009, 03:32:33 03:32 - Automerged

pirvcb and sadman sorry for waiting ...

Posted on: August 30, 2009, 04:11:06 04:11 - Automerged

linoko I will do that soon  ... Smiley)
Logged
ali_asadzadeh
Junior Member
**
Offline Offline

Posts: 82

Thank You
-Given: 5
-Receive: 12


« Reply #21 on: August 31, 2009, 10:18:19 10:18 »

If anybody want to learn sms sending and reciving concept there is an app note on atmel site that explains everything

http://www.atmel.com/dyn/products/app_notes.asp?family_id=607
and download avr323 app note.
Logged
iphone
Active Member
***
 Muted
Offline Offline

Posts: 168

Thank You
-Given: 115
-Receive: 10


« Reply #22 on: January 16, 2011, 06:23:35 18:23 »

GSM Controller


Introduction

GSM Controller is a device that allows you to control appliances using SMS messages. There are also 4 inputs for connecting sensors so the device will send an alarm SMS or even call you to report an alarm condition. The device draws very little current and is being powered by phone’s battery which is a great thing. Nokia should be constantly charged or supplied with some sort of external power for long term operation.

GSM Controller Thing has been successfully tested on:

   1. Nokia 7110 (19200 bps, 8 MHz crystal for PIC16F628A)
   2. Nokia 6210 (9600 bps, 4 MHz crystal for PIC16F628A)
   3. Nokia 6310i (9600 bps, 8 MHz crystal for PIC16F628A)

It should work on all DLR-3P Nokia phones with internal AT modem. These should work: 62xx, 63xx, 6210, 7110...
Cable used for this device is DLR-3P cable and it’s embedded on the same PCB with the GMS Controller.

Details about functionality of the device, hex ... are in a word doc document among link down

project link:
http://rapidshare.com/files/117433956/009.rar <-old dead link

new http://rapidshare.com/files/273239053/009.rar working link

pass:sonsivri


Hi zokij, can you upload one more time please!.

tq
Logged
zuisti
Senior Member
****
Offline Offline

Posts: 371

Thank You
-Given: 219
-Receive: 567


« Reply #23 on: January 16, 2011, 06:37:47 18:37 »

Hi;
The 2nd link is still working...
Logged
Pages: [1]
Print
Jump to:  


DISCLAIMER
WE DONT HOST ANY ILLEGAL FILES ON THE SERVER
USE CONTACT US TO REPORT ILLEGAL FILES
ADMINISTRATORS CANNOT BE HELD RESPONSIBLE FOR USERS POSTS AND LINKS

... Copyright 2003-2999 Sonsivri.to ...
Powered by SMF 1.1.18 | SMF © 2006-2009, Simple Machines LLC | HarzeM Dilber MC