Custom Fonts for GLCD (KS0108 128x64 GLCD) in FASTAVR?

[joprinz]

I am doing a project which uses KS0108 based 128x64 GLCD as the display device. I would like to know if anyone knows how to make CUSTOM fonts for using with the GLCD? I'm in need of a 5x5 font for FastAvr . There are plenty of posts suggesting the use of FASTLCD application. But somehow nowhere its written HOW to use the FASTLCD application. The application comes with NO HELP File too. So if anyone has any ideas or experience plz share them. It be a lot of help for people like me who are stuck with the default fonts in FASTAVR.

Please Advice!

Thank You!

[mick]

Take a look at Bascom AVR how to handle GLCD

[bambo_o]

I use GLCD Font Creator but I loss the crack.

site: http://www.pocketmt.com/

[omidsht]

try sending email to bojan ivancic , (in fastavr website) , and if you get something to know , let me know too .
omid

[karthikeyan_sw]

try using fontgen application its free to use. If you are not able to get one then let me know

[omidsht]

try using fontgen application its free to use. If you are not able to get one then let me know

hi , please share it

[joprinz]

Jus wanted to tell U guys not to waste ur time searching for a 5x5 font that works on FASTAVR standard libraries for GLCD. Well as it turns out I was on a wild goose chase. After a couple of weeks of research i've finally understood that FASTAVR standard libraries cannot handle Fonts under 8 Pixels. So the only way to incorporate a smaller font using FASTAVR is by writing a whole GLCD library on your own. I'm in the process of writing one. I'l post it once I'm done.

if anyone has already done a custom GLCD Library for FASTAVR it be great if we could discuss it here.

J