Need Help for LCD Driver

[Sepiroth]

Hi all,
I'm trying to drive a 4x20 LCD with KS0066 chipset using a PIC18F6520 & HiTech PICC18 9.63 Pro. I've connected control and data pins on the same port (PORTF, 7-4 Data, 3 Rs 2 Rw 1 En 0 Backlight) of the pic. So far I've managed to get LCD to work, but whenever I reset PIC, it doesnt display at all. After resetting second time, it works, so its like its randomly working (something like works every 7 out of 10 resets). What may cause the problem? I've attached the lcd driver that im using. Thanks in advance,

[pickit2]

I only use C when made to, but 10ms to let things settle down is a bit low. your starting pic and jumping to LCD, try 100ms delay at start up. (200ms would be better)
here is start up for lcd in proton sample

Code:

       ' SET UP LCD 4-bit Interface
        LCD_DTPin = PORTC.0	
		LCD_RSPin = PORTC.5
		LCD_ENPin = PORTC.4
		LCD_Interface = 4	    ' 4-bit Interface
		LCD_Lines = 2
		LCD_Type = 0
		LCD_CommandUs = 2000
		LCD_DataUs = 50

[Sepiroth]

Hi again,
I'm using a 10MHz xtal with PLL to make it 40MHz, at the main code i already put a 250ms delay, after that i try to init lcd. what makes me crazy is, if i increase the delay, it crashes, if i decrease the delay time, it crashes again, thats where i stucked tbh:') i

[TomJackson69]

Sepiroth,

Is your program works now?
Still need help? If so, post your complete program or at least your main function.
Also the LCD part number or made.

Tom