Title: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: jesse on October 20, 2009, 06:24:42 06:24 Finally!!!!!!!
Solidworks 2010 SP0 Win32, Win64, Full, Multilanguage, and Medicine. Torrent file for now: http://www.filefactory.com/file/a052d3h/n/SW_2k10_rar Beware of the size: 10.15 GB Saludos EDIT: Corrected torrent file Title: Re: SolidWorks 2010 all versions Post by: preatorian on October 23, 2009, 03:11:19 15:11 Hi all,
Is this an official release? regards Title: Re: SolidWorks 2010 all versions Post by: joker12 on October 24, 2009, 02:26:48 02:26 Saw this posted at http://my.softarchive.net/search/?q=solidworks+2010&x=12&y=7
Downloads are from Hotfile / Storage / Filefactory No Rapidshare links. x32 and x64 iso's included. PS: Very large Download! Update: I downloaded and installed 64 bit version. It seems to work. I have not tried all the functions. Total download is 10 Gigs. X32 = 5 Gigs and x64 = 5 Gigs Cracks are patched DLL's Also Keep firewall up or disconnect Network as it calls home at begin install to verify serial number. Title: Re: SolidWorks 2010 all versions Post by: gk101 on December 12, 2009, 04:05:18 16:05 I downloaded the x86 parts (52 files + sfv ) and the download went fine. When I tried to open a file with WINRAR it ask for a password. I did open with WINRAR the sfv file and I thought the numbers (FC51D247 for part01) was the password, I guess not.
Where do I find or get the password so WINRAR will open these files? Title: Re: SolidWorks 2010 all versions Post by: oldvan on December 13, 2009, 01:13:33 01:13 Solidworks 2010 SP0 Win32, Win64, Full, Multilanguage, and Medicine. Torrent file for now: http://www.filefactory.com/file/a052d3h/n/SW_2k10_rar Beware of the size: 10.15 GB Tracker responds "torrent file not registered", but thanks to DHT/Peer Exchange torrent is downloading now, shows 6 seeders and 88 peers. ----------------------------------- About 24 hours later... PS: Success downloading 32-bit version using the torrent. Title: Re: SolidWorks 2010 all versions Post by: hosmis on December 13, 2009, 09:37:51 09:37 Working
ed2k://|file|[3D.CAD.%E8%A8%AD%E8%A8%88%E5%B7%A5%E7%A8%8B%E8%BB%9F%E4%BB%B6].SolidWorks.2010.SP0.0.Multilingual.Win32.Full.DVDiSO.iso|5360013312|A1E9B5F27F1D79F46F3B64629B0BFDD5|h=WGE42FHKR7XZMO2TWKTW7QKS4SUORD5G|/ Title: Re: SolidWorks 2010 all versions Post by: pickit2 on December 13, 2009, 02:12:46 14:12 I downloaded the x86 parts (52 files + sfv ) and the download went fine. When I tried to open a file with WINRAR it ask for a password. I did open with WINRAR the sfv file and I thought the numbers (FC51D247 for part01) was the password, I guess not. password is in the post Where do I find or get the password so WINRAR will open these files? Note: this is not a link but it is the password >> [email protected] Title: Re: SolidWorks 2010 all versions Post by: gk101 on December 13, 2009, 08:40:59 20:40 Thanks for the help!!! I was able to open and install. Everthing opens fine except the SW 2010 drawing program itself. As it is opening a box pops up saying "An error has occurred and Solidworks needs to restart" Now I still have Solidworks 2007 installed. Could that be the problem. Should I uninstall '07?
Title: Re: SolidWorks 2010 all versions Post by: Wizpic on December 13, 2009, 09:05:05 21:05 it sounds like you have not installed the pathces correct, I've still got solidworks 2009 SP0 installed and both still work.
I had the same problem but reinstalled tha patches and everything worked ok Title: Re: SolidWorks 2010 all versions Post by: gk101 on December 13, 2009, 10:39:00 22:39 I thought that also but I checked the version and it is the correct one. I put the sldappu.dll in the C:\program files\solidworks corp\solidworks it is version 18.0.0.5035. I'm at a loss. I've done 2006 and 2007 no problem.but this one is giving me a headache!
Thanks for your help...any other ideas will be welcome. Title: Re: SolidWorks 2010 all versions Post by: Wizpic on December 14, 2009, 08:08:01 20:08 Have you only patched 1 file,
the patches I applied as follows E-drawings folder 3 dll files photoview360 folder 1 dll file simulation folder licnce.dat file solidworks folder (win32) SLDAPPu.dll swexplorer a patcher exe file If not try this way and it shoudl work Title: Re: SolidWorks 2010 all versions Post by: gk101 on December 15, 2009, 05:16:03 05:16 You just maybe correct. I don't think I put the error correct in SWexplorer. So I did that and first it said error fixed then it still would not work. So I'm doing it all over again.
Thanks, You have been a lot of help. I feel confident I can get this running with your help. The other solidworks (2006 & 2007) I got working just had one crack file and it was done. This one is a little more complicated. Title: Re: SolidWorks 2010 all versions Post by: gk101 on December 16, 2009, 04:11:01 04:11 Okay, I cleared everything out and tried again. E-drawings, Photoview360, swexplorer seems to work.
Now when I installed SW2010 it ask me if I wanted to install simulation. Was I supposed to check yes? If so what serial #? I think that maybe one problem. Also when I copy swexplorer2pdmworks_crk to swexplorer file when I click on it in the file it says error fixed.But after I try to load SW I get the error message and it then says "error Patching file" Also it does not say it is an .exe file it says it is an Application. My patch says:"swexplorer2pdmworks_crk" NOT "swexplorer2pdmworks_crk.exe" And just curious what is this number for?...Serial Number: 04M7DP-PEJTNX-FR64BH-BVJB36-5K9QQW-AWD5VA I'm hoping you can see something I'm doing incorrectly! Title: Re: SolidWorks 2010 all versions Post by: pickit2 on December 17, 2009, 12:32:08 00:32 This from the sw2010_SolidSQUAD.nfo with some notes.[you need to read between the lines, for nfo files] :P
---------------------------------------- Install Notes ---------------------------------------- 1. Burn the DVD images on DOUBLE-LAYER DVD+R or mount via Alcohol 120% or Daemon Tools. 2. Point to X:/sldim/sldim.exe, where X is your DVD letter 3. Install and use the enclosed serial [in sw2010_SolidSQUAD.nfo] 4. Apply cracks from archive [by this copy the contents of the folders in the crack folder to your install folder]see wizpics last post two above this one. if you don't copy the cracks over SW2010 makes out it's working but will fall over sometime later. 5. Enjoy! Quote My patch says:"swexplorer2pdmworks_crk" NOT "swexplorer2pdmworks_crk.exe" means you have file .extension or system files hidden, so windows don't show the .exeTitle: Re: SolidWorks 2010 all versions Post by: gk101 on December 17, 2009, 01:13:18 13:13 Thanks for your help!!
I have done everything to the letter (except I used MagicISO, is that a problem?) and I still get an "error message". I'll just go back to my 2007 for now. Title: Re: SolidWorks 2010 all versions Post by: pickit2 on December 17, 2009, 08:11:37 20:11 I have done everything to the letter (except I used MagicISO, is that a problem?) and I still get an "error message". I would have used nero or an other burning program to write the iso, or you could use winrar to unpack the *.iso to c:\sw2010 and run install from there.Title: Re: SolidWorks 2010 all versions Post by: gk101 on December 18, 2009, 02:53:18 14:53 I unpacked with WINRAR installed the paches but get the same error message.
I know I'm not doing some little thing or doing something incorrect. One thing I do know Simulation is not installing completely. SW install ask for a password for simulation. Don't know what to use. Many thanks for your help. Title: Re: SolidWorks 2010 all versions Post by: pickit2 on December 19, 2009, 01:09:47 13:09 What version are you using? I have installed 64bit onto main pc and laptop.
Q. did you use the install serial to be found in the file sw2010_SolidSQUAD.nfo there are two one starting >>> 0000 0000 0000 plus another 3 sets of numbers. (total 24 digits) From starting install from setup.exe, The install don't ask for any other serials after that number is put in and install carrys on to finish. Title: Re: SolidWorks 2010 all versions Post by: gk101 on December 19, 2009, 03:22:03 15:22 I downloaded the x86, 52 rar files + sfv from Rapidshare.
I opened the files with WINRAR, The first time I did a virtual mount with MAGICiso. Then under SW2010_SPO I clicked on the RED SW cube and a window saying "SolidWorks 2010 SPO Installation Manager" comes up with a graphic of the bottom half of a motorcycle at the top. It ask me If I'm individual or Administrative, I chose the former, Click Next, It ask for Serial Number, It already has the first 4 sets filled in correctly I filled in the last two set of four with proper letters and numbers as found in: Solidworks\SW 2010uz\solidSquad. Then on the same page it ask for other serial numbers, For PDM,Simulation,Motion and Flow Simulation. If I click on Simulation it has a set of boxes for the numbers, I tried the same set as for the program itself and it says incorrect so I just leave those four choices unchecked. Then click next it checks my system and it starts install. Every thing seams okay. I then go to C:\ where it loaded and apply the patches as instructions in solidSQUAD crack file. The thing is everything, Solidworks, edrawings,photoview360 and explorer I find where to overwrite the patches to except for Simulation.Also I find no icon to setup Simulation. So I click on the Desktop SW 2010 icon and SW 2010 graphic comes up and the a few seconds later the screen flickers and the a box pops up and says "an error has occurred and solidworks needs to restart". Now when I unpack to C:\ with WINRAR A different small install window comes up, It has no motorcycle graphic, Just says install SW 2010 on my computer, It only ask for the serial number a few questions like sharing info I choose no and then install. Everything seems okay. After it completes install I find where to put all the cracks per instructions except for Simulation!! I can't find where to put the "license DAT file. Simulation Is in a sub folder and I don't see where to over write the DAT to. There is no " SW Simulation progdir>\License". I have opened every folder and file to find the license and a setup but find none. So I do nothing for Simulation. So when I click the desktop icon for SW 2010 It starts to open I get the same flicker and the same error window pops up. Thats all I know to tell you. Title: Re: SolidWorks 2010 all versions Post by: solutions on April 30, 2010, 05:37:32 05:37 SolidWorks 2010 SP3.0 Multilanguage Win32 & Win64 | 4.7 GB At SolidWorks, we’re 100% focused on helping our customers work faster, be more efficient, and focus on design. Our products are sold in over 100 countries, serving the design community in fields ranging from machinery to electrical to education. Our products combine ease of use with advanced 2D and 3D design tools, helping you unleash your design creativity while completing more work in less time. SolidWorks software reduces CAD overhead because it’s simple to deploy, simple to use, and simple to maintain. SolidWorks lets you design the way you want. SolidWorks 2010 improves depth and performance by extending the DS SolidWorks tradition of including hundreds of new enhancements specifically requested by customers. It’s designed to provide every design team with an improved work experience that can bring you to new levels of success, regardless of industry. HomePage: http://www.solidworks.com/ http://hotfile.com/dl/40400849/dfe7913/SW2010_SP3.0.part01.rar.html http://hotfile.com/dl/40400966/4cf62fe/SW2010_SP3.0.part02.rar.html http://hotfile.com/dl/40401115/4379fc8/SW2010_SP3.0.part03.rar.html http://hotfile.com/dl/40401145/808acd8/SW2010_SP3.0.part04.rar.html http://hotfile.com/dl/40401203/db391a6/SW2010_SP3.0.part05.rar.html http://hotfile.com/dl/40401259/75a0073/SW2010_SP3.0.part06.rar.html http://hotfile.com/dl/40401375/ff00023/SW2010_SP3.0.part07.rar.html http://hotfile.com/dl/40401400/15fb96d/SW2010_SP3.0.part08.rar.html http://hotfile.com/dl/40401473/1243de3/SW2010_SP3.0.part09.rar.html http://hotfile.com/dl/40401521/264f2eb/SW2010_SP3.0.part10.rar.html http://hotfile.com/dl/40401636/7a4fcc6/SW2010_SP3.0.part11.rar.html http://hotfile.com/dl/40401658/82b5938/SW2010_SP3.0.part12.rar.html http://hotfile.com/dl/40401710/b0957a7/SW2010_SP3.0.part13.rar.html http://hotfile.com/dl/40401780/d73ed87/SW2010_SP3.0.part14.rar.html http://hotfile.com/dl/40401882/ab15e4c/SW2010_SP3.0.part15.rar.html http://hotfile.com/dl/40396953/61b5a98/SW2010_SP3.0.part16.rar.html Title: Re: SolidWorks 2010 all versions Post by: hosmis on April 30, 2010, 03:58:34 15:58 SW 2010 SP3.0 cracks
Win32 http://rapidshare.com/files/381089627/sw2k10sp3.0_win32_SSQ.rar.html (http://rapidshare.com/files/381089627/sw2k10sp3.0_win32_SSQ.rar.html) Win64 http://rapidshare.com/files/381089369/sw2k10sp3.0_win64_SSQ.rar.html (http://rapidshare.com/files/381089369/sw2k10sp3.0_win64_SSQ.rar.html) SW 2010 SP3.0 Updates SW 2010 SP3.0 common (Win32 & Win64) updates eDrawings 2010 sp3.0 http://rapidshare.com/files/380935683/eDrawings2k10sp3.0.rar.html (http://rapidshare.com/files/380935683/eDrawings2k10sp3.0.rar.html) SW 2DEditor 2010 SP3.0 http://rapidshare.com/files/381130368/sw_2DEditor2k10sp3.0.rar.html (http://rapidshare.com/files/381130368/sw_2DEditor2k10sp3.0.rar.html) PhotoView 2010 sp3.0 Full Setup http://rapidshare.com/files/381079937/photoview2k10sp3.0_full.part1.rar.html (http://rapidshare.com/files/381079937/photoview2k10sp3.0_full.part1.rar.html) http://rapidshare.com/files/381082563/photoview2k10sp3.0_full.part2.rar.html (http://rapidshare.com/files/381082563/photoview2k10sp3.0_full.part2.rar.html) Updates only 0.0-3.0 http://rapidshare.com/files/380935284/photoview2k10-0.0-3.0.rar.html (http://rapidshare.com/files/380935284/photoview2k10-0.0-3.0.rar.html) 1.0-3.0 http://rapidshare.com/files/380935329/photoview2k10-1.0-3.0.rar.html (http://rapidshare.com/files/380935329/photoview2k10-1.0-3.0.rar.html) 2.0-3.0 http://rapidshare.com/files/380935390/photoview2k10-2.0-3.0.rar.html (http://rapidshare.com/files/380935390/photoview2k10-2.0-3.0.rar.html) 2.1-3.0 http://rapidshare.com/files/380935570/photoview2k10-2.1-3.0.rar.html (http://rapidshare.com/files/380935570/photoview2k10-2.1-3.0.rar.html) SW 2010 SP3.0 Help swHelpChinese 2010 sp3.0 http://rapidshare.com/files/380936710/swHelpChinese2k10sp3.0.rar.html (http://rapidshare.com/files/380936710/swHelpChinese2k10sp3.0.rar.html) swHelpChinese-Simplified 2010 sp3.0 http://rapidshare.com/files/380936726/swHelpChinese-Simplified2k10sp3.0.rar.html (http://rapidshare.com/files/380936726/swHelpChinese-Simplified2k10sp3.0.rar.html) swHelpEnglish 2010 sp3.0 http://rapidshare.com/files/380937701/swHelpEnglish2k10sp3.0.rar.html (http://rapidshare.com/files/380937701/swHelpEnglish2k10sp3.0.rar.html) SolidWorks 2010 Win32 Updates SW core update (including SW Simulation and SW Motion updates) 0.0-3.0 http://rapidshare.com/files/380944977/sw2k10-0.0-3.0-i.rar.html (http://rapidshare.com/files/380944977/sw2k10-0.0-3.0-i.rar.html) 1.0-3.0 http://rapidshare.com/files/380945038/sw2k10-1.0-3.0-i.rar.html (http://rapidshare.com/files/380945038/sw2k10-1.0-3.0-i.rar.html) 2.0-3.0 http://rapidshare.com/files/380946036/sw2k10-2.0-3.0-i.rar.html (http://rapidshare.com/files/380946036/sw2k10-2.0-3.0-i.rar.html) 2.1-3.0 http://rapidshare.com/files/380946089/sw2k10-2.1-3.0-i.rar.html (http://rapidshare.com/files/380946089/sw2k10-2.1-3.0-i.rar.html) COSMOSM 2010 sp3.0 Win32 http://rapidshare.com/files/380940227/cosmosm2k10sp3.0-i.rar.html (http://rapidshare.com/files/380940227/cosmosm2k10sp3.0-i.rar.html) eDrwAPISDK 2010 sp3.0 http://rapidshare.com/files/380939667/eDrwAPISDK2k10sp3.0-i.rar.html (http://rapidshare.com/files/380939667/eDrwAPISDK2k10sp3.0-i.rar.html) SW FlowSimulation 2010 sp3.0 Win32 Full setup http://rapidshare.com/files/380941581/flowsimulation2k10sp3.0_full-i.rar.html (http://rapidshare.com/files/380941581/flowsimulation2k10sp3.0_full-i.rar.html) Updates only 0.0-3.0 http://rapidshare.com/files/380939920/flowsimulation2k10-0.0-3.0-i.rar.html (http://rapidshare.com/files/380939920/flowsimulation2k10-0.0-3.0-i.rar.html) 1.0-3.0 http://rapidshare.com/files/380940138/flowsimulation2k10-1.0-3.0-i.rar.html (http://rapidshare.com/files/380940138/flowsimulation2k10-1.0-3.0-i.rar.html) 2.0-3.0 http://rapidshare.com/files/380940363/flowsimulation2k10-2.0-3.0-i.rar.html (http://rapidshare.com/files/380940363/flowsimulation2k10-2.0-3.0-i.rar.html) 2.1-3.0 http://rapidshare.com/files/380940439/flowsimulation2k10-2.1-3.0-i.rar.html (http://rapidshare.com/files/380940439/flowsimulation2k10-2.1-3.0-i.rar.html) PDM Works Server 2010 sp3.0 Win32 http://rapidshare.com/files/380947874/pdmwserver2k10sp3.0-i.part1.rar.html (http://rapidshare.com/files/380947874/pdmwserver2k10sp3.0-i.part1.rar.html) http://rapidshare.com/files/380947470/pdmwserver2k10sp3.0-i.part2.rar.html (http://rapidshare.com/files/380947470/pdmwserver2k10sp3.0-i.part2.rar.html) SW Explorer 2010 sp3.0 Win32 Full setup http://rapidshare.com/files/380942946/swexplorer2k10sp3.0_full-i.rar.html (http://rapidshare.com/files/380942946/swexplorer2k10sp3.0_full-i.rar.html) Updates only 0.0-3.0 http://rapidshare.com/files/380940911/swexplorer2k10-0.0-3.0-i.rar.html (http://rapidshare.com/files/380940911/swexplorer2k10-0.0-3.0-i.rar.html) 1.0-3.0 http://rapidshare.com/files/380941394/swexplorer2k10-1.0-3.0-i.rar.html (http://rapidshare.com/files/380941394/swexplorer2k10-1.0-3.0-i.rar.html) 2.0-3.0 http://rapidshare.com/files/380941717/swexplorer2k10-2.0-3.0-i.rar.html (http://rapidshare.com/files/380941717/swexplorer2k10-2.0-3.0-i.rar.html) 2.1-3.0 http://rapidshare.com/files/380941877/swexplorer2k10-2.1-3.0-i.rar.html (http://rapidshare.com/files/380941877/swexplorer2k10-2.1-3.0-i.rar.html) SolidWorks 2010 Win64 Updates SW core update (including SW Simulation and SW Motion updates) 0.0-3.0 http://rapidshare.com/files/380952908/sw2k10-0.0-3.0-x.part1.rar.html (http://rapidshare.com/files/380952908/sw2k10-0.0-3.0-x.part1.rar.html) http://rapidshare.com/files/380952105/sw2k10-0.0-3.0-x.part2.rar.html (http://rapidshare.com/files/380952105/sw2k10-0.0-3.0-x.part2.rar.html) 1.0-3.0 http://rapidshare.com/files/380953315/sw2k10-1.0-3.0-x.part1.rar.html (http://rapidshare.com/files/380953315/sw2k10-1.0-3.0-x.part1.rar.html) http://rapidshare.com/files/380953039/sw2k10-1.0-3.0-x.part2.rar.html (http://rapidshare.com/files/380953039/sw2k10-1.0-3.0-x.part2.rar.html) 2.0-3.0 http://rapidshare.com/files/380954068/sw2k10-2.0-3.0-x.rar.html (http://rapidshare.com/files/380954068/sw2k10-2.0-3.0-x.rar.html) 2.1-3.0 http://rapidshare.com/files/380954332/sw2k10-2.1-3.0-x.rar.html (http://rapidshare.com/files/380954332/sw2k10-2.1-3.0-x.rar.html) COSMOSM 2010 sp3.0 Win64 http://rapidshare.com/files/380948578/cosmosm2k10sp3.0-x.rar.html (http://rapidshare.com/files/380948578/cosmosm2k10sp3.0-x.rar.html) eDrwAPISDK 2010 sp3.0 http://rapidshare.com/files/380947970/eDrwAPISDK2k10sp3.0-x.rar.html (http://rapidshare.com/files/380947970/eDrwAPISDK2k10sp3.0-x.rar.html) SW FlowSimulation 2010 sp3.0 Win64 Full Setup http://rapidshare.com/files/380949811/flowsimulation2k10sp3.0_full-x.rar.html (http://rapidshare.com/files/380949811/flowsimulation2k10sp3.0_full-x.rar.html) Updates only 0.0-3.0 http://rapidshare.com/files/380948304/flowsimulation2k10-0.0-3.0-x.rar.html (http://rapidshare.com/files/380948304/flowsimulation2k10-0.0-3.0-x.rar.html) 1.0-3.0 http://rapidshare.com/files/380948582/flowsimulation2k10-1.0-3.0-x.rar.html (http://rapidshare.com/files/380948582/flowsimulation2k10-1.0-3.0-x.rar.html) 2.0-3.0 http://rapidshare.com/files/380948872/flowsimulation2k10-2.0-3.0-x.rar.html (http://rapidshare.com/files/380948872/flowsimulation2k10-2.0-3.0-x.rar.html) 2.1-3.0 http://rapidshare.com/files/380948804/flowsimulation2k10-2.1-3.0-x.rar.html (http://rapidshare.com/files/380948804/flowsimulation2k10-2.1-3.0-x.rar.html) PDM Works Server 2010 sp3.0 Win64 http://rapidshare.com/files/380955287/pdmwserver2k10sp3.0-x.part1.rar.html (http://rapidshare.com/files/380955287/pdmwserver2k10sp3.0-x.part1.rar.html) http://rapidshare.com/files/380955563/pdmwserver2k10sp3.0-x.part2.rar.html (http://rapidshare.com/files/380955563/pdmwserver2k10sp3.0-x.part2.rar.html) http://rapidshare.com/files/380956183/pdmwserver2k10sp3.0-x.part3.rar.html (http://rapidshare.com/files/380956183/pdmwserver2k10sp3.0-x.part3.rar.html) SW Explorer 2010 sp3.0 Win64 Full setup http://rapidshare.com/files/380951571/swexplorer2k10sp3.0_full-x.rar.html (http://rapidshare.com/files/380951571/swexplorer2k10sp3.0_full-x.rar.html) Updates only 0.0-3.0 http://rapidshare.com/files/380949513/swexplorer2k10-0.0-3.0-x.rar.html (http://rapidshare.com/files/380949513/swexplorer2k10-0.0-3.0-x.rar.html) 1.0-3.0 http://rapidshare.com/files/380950133/swexplorer2k10-1.0-3.0-x.rar.html (http://rapidshare.com/files/380950133/swexplorer2k10-1.0-3.0-x.rar.html) 2.0-3.0 http://rapidshare.com/files/380950271/swexplorer2k10-2.0-3.0-x.rar.html (http://rapidshare.com/files/380950271/swexplorer2k10-2.0-3.0-x.rar.html) 2.1-3.0 http://rapidshare.com/files/380950517/swexplorer2k10-2.1-3.0-x.rar.html (http://rapidshare.com/files/380950517/swexplorer2k10-2.1-3.0-x.rar.html) Alternatif Packet http://rapidshare.com/files/381368836/SW.txt.html (http://rapidshare.com/files/381368836/SW.txt.html) alternatif http://hotfile.com/dl/40279127/924532e/SW2010.3.0.part01.rar.html (http://hotfile.com/dl/40279127/924532e/SW2010.3.0.part01.rar.html) http://hotfile.com/dl/40279128/6f2b17e/SW2010.3.0.part02.rar.html (http://hotfile.com/dl/40279128/6f2b17e/SW2010.3.0.part02.rar.html) http://hotfile.com/dl/40279131/6fe4869/SW2010.3.0.part03.rar.html (http://hotfile.com/dl/40279131/6fe4869/SW2010.3.0.part03.rar.html) http://hotfile.com/dl/40279130/a35426b/SW2010.3.0.part04.rar.html (http://hotfile.com/dl/40279130/a35426b/SW2010.3.0.part04.rar.html) http://hotfile.com/dl/40279129/6cc6ac5/SW2010.3.0.part05.rar.html (http://hotfile.com/dl/40279129/6cc6ac5/SW2010.3.0.part05.rar.html) http://hotfile.com/dl/40279302/c23830f/SW2010.3.0.part06.rar.html (http://hotfile.com/dl/40279302/c23830f/SW2010.3.0.part06.rar.html) http://hotfile.com/dl/40279313/ad3c25a/SW2010.3.0.part07.rar.html (http://hotfile.com/dl/40279313/ad3c25a/SW2010.3.0.part07.rar.html) http://hotfile.com/dl/40279331/6460270/SW2010.3.0.part08.rar.html (http://hotfile.com/dl/40279331/6460270/SW2010.3.0.part08.rar.html) http://hotfile.com/dl/40279345/f813354/SW2010.3.0.part09.rar.html (http://hotfile.com/dl/40279345/f813354/SW2010.3.0.part09.rar.html) http://hotfile.com/dl/40279350/7713eca/SW2010.3.0.part10.rar.html (http://hotfile.com/dl/40279350/7713eca/SW2010.3.0.part10.rar.html) http://hotfile.com/dl/40279462/d6989e6/SW2010.3.0.part11.rar.html (http://hotfile.com/dl/40279462/d6989e6/SW2010.3.0.part11.rar.html) http://hotfile.com/dl/40279492/7c59f31/SW2010.3.0.part12.rar.html (http://hotfile.com/dl/40279492/7c59f31/SW2010.3.0.part12.rar.html) http://hotfile.com/dl/40279512/c46aedb/SW2010.3.0.part13.rar.html (http://hotfile.com/dl/40279512/c46aedb/SW2010.3.0.part13.rar.html) http://hotfile.com/dl/40279514/be36931/SW2010.3.0.part14.rar.html (http://hotfile.com/dl/40279514/be36931/SW2010.3.0.part14.rar.html) http://hotfile.com/dl/40279523/c744249/SW2010.3.0.part15.rar.html (http://hotfile.com/dl/40279523/c744249/SW2010.3.0.part15.rar.html) http://hotfile.com/dl/40279613/0f9bd63/SW2010.3.0.part16.rar.html (http://hotfile.com/dl/40279613/0f9bd63/SW2010.3.0.part16.rar.html) http://hotfile.com/dl/40279649/9e506b1/SW2010.3.0.part17.rar.html (http://hotfile.com/dl/40279649/9e506b1/SW2010.3.0.part17.rar.html) http://hotfile.com/dl/40279652/f3a4fd9/SW2010.3.0.part18.rar.html (http://hotfile.com/dl/40279652/f3a4fd9/SW2010.3.0.part18.rar.html) http://hotfile.com/dl/40279659/31151bb/SW2010.3.0.part19.rar.html (http://hotfile.com/dl/40279659/31151bb/SW2010.3.0.part19.rar.html) http://hotfile.com/dl/40279673/672f184/SW2010.3.0.part20.rar.html (http://hotfile.com/dl/40279673/672f184/SW2010.3.0.part20.rar.html) http://hotfile.com/dl/40280825/2629e53/SW2010.3.0.part21.rar.html (http://hotfile.com/dl/40280825/2629e53/SW2010.3.0.part21.rar.html) http://hotfile.com/dl/40280826/22467fe/SW2010.3.0.part22.rar.html (http://hotfile.com/dl/40280826/22467fe/SW2010.3.0.part22.rar.html) http://hotfile.com/dl/40280823/2e9a5d4/SW2010.3.0.part23.rar.html (http://hotfile.com/dl/40280823/2e9a5d4/SW2010.3.0.part23.rar.html) http://hotfile.com/dl/40280824/bf6e929/SW2010.3.0.part24.rar.html (http://hotfile.com/dl/40280824/bf6e929/SW2010.3.0.part24.rar.html) http://hotfile.com/dl/40280827/acf4efb/SW2010.3.0.part25.rar.html (http://hotfile.com/dl/40280827/acf4efb/SW2010.3.0.part25.rar.html) http://hotfile.com/dl/40280926/e0b5bec/SW2010.3.0.part26.rar.html (http://hotfile.com/dl/40280926/e0b5bec/SW2010.3.0.part26.rar.html) http://hotfile.com/dl/40280931/6ea57a3/SW2010.3.0.part27.rar.html (http://hotfile.com/dl/40280931/6ea57a3/SW2010.3.0.part27.rar.html) http://hotfile.com/dl/40280932/1c5acd6/SW2010.3.0.part28.rar.html (http://hotfile.com/dl/40280932/1c5acd6/SW2010.3.0.part28.rar.html) http://hotfile.com/dl/40280942/92d08bd/SW2010.3.0.part29.rar.html (http://hotfile.com/dl/40280942/92d08bd/SW2010.3.0.part29.rar.html) http://hotfile.com/dl/40280952/07b3057/SW2010.3.0.part30.rar.html (http://hotfile.com/dl/40280952/07b3057/SW2010.3.0.part30.rar.html) http://hotfile.com/dl/40281092/f78e3eb/SW2010.3.0.part31.rar.html (http://hotfile.com/dl/40281092/f78e3eb/SW2010.3.0.part31.rar.html) http://hotfile.com/dl/40281099/0ee4095/SW2010.3.0.part32.rar.html (http://hotfile.com/dl/40281099/0ee4095/SW2010.3.0.part32.rar.html) http://hotfile.com/dl/40281112/41b572b/SW2010.3.0.part33.rar.html (http://hotfile.com/dl/40281112/41b572b/SW2010.3.0.part33.rar.html) http://hotfile.com/dl/40281117/10bc0e7/SW2010.3.0.part34.rar.html (http://hotfile.com/dl/40281117/10bc0e7/SW2010.3.0.part34.rar.html) http://hotfile.com/dl/40281123/916f2ca/SW2010.3.0.part35.rar.html (http://hotfile.com/dl/40281123/916f2ca/SW2010.3.0.part35.rar.html) http://hotfile.com/dl/40281163/028064f/SW2010.3.0.part36.rar.html (http://hotfile.com/dl/40281163/028064f/SW2010.3.0.part36.rar.html) http://hotfile.com/dl/40281170/3312805/SW2010.3.0.part37.rar.html (http://hotfile.com/dl/40281170/3312805/SW2010.3.0.part37.rar.html) http://hotfile.com/dl/40281201/f76df6c/SW2010.3.0.part38.rar.html (http://hotfile.com/dl/40281201/f76df6c/SW2010.3.0.part38.rar.html) http://hotfile.com/dl/40281210/fa0755a/SW2010.3.0.part39.rar.html (http://hotfile.com/dl/40281210/fa0755a/SW2010.3.0.part39.rar.html) http://hotfile.com/dl/40281242/341fe60/SW2010.3.0.part40.rar.html (http://hotfile.com/dl/40281242/341fe60/SW2010.3.0.part40.rar.html) http://hotfile.com/dl/40281259/ac6dab2/SW2010.3.0.part41.rar.html (http://hotfile.com/dl/40281259/ac6dab2/SW2010.3.0.part41.rar.html) http://hotfile.com/dl/40281296/108b76b/SW2010.3.0.part42.rar.html (http://hotfile.com/dl/40281296/108b76b/SW2010.3.0.part42.rar.html) http://hotfile.com/dl/40281301/b403105/SW2010.3.0.part43.rar.html (http://hotfile.com/dl/40281301/b403105/SW2010.3.0.part43.rar.html) http://hotfile.com/dl/40281351/8709deb/SW2010.3.0.part44.rar.html (http://hotfile.com/dl/40281351/8709deb/SW2010.3.0.part44.rar.html) http://hotfile.com/dl/40281352/20489d4/SW2010.3.0.part45.rar.html (http://hotfile.com/dl/40281352/20489d4/SW2010.3.0.part45.rar.html) http://hotfile.com/dl/40281362/3b5a448/SW2010.3.0.part46.rar.html (http://hotfile.com/dl/40281362/3b5a448/SW2010.3.0.part46.rar.html) http://hotfile.com/dl/40281373/87af5df/SW2010.3.0.part47.rar.html (http://hotfile.com/dl/40281373/87af5df/SW2010.3.0.part47.rar.html) http://hotfile.com/dl/40281386/8b1806b/SW2010.3.0.part48.rar.html (http://hotfile.com/dl/40281386/8b1806b/SW2010.3.0.part48.rar.html) http://hotfile.com/dl/40281408/a9e9809/SW2010.3.0.part49.rar.html (http://hotfile.com/dl/40281408/a9e9809/SW2010.3.0.part49.rar.html) Title: Re: SolidWorks 2010 all versions Post by: sgoum on May 03, 2010, 04:08:11 16:08 This is SW 2010 32bit
http://rapidshare.com/files/321323739/SW2010_SP0.0_Win32.part01.rar http://rapidshare.com/files/321323744/SW2010_SP0.0_Win32.part02.rar http://rapidshare.com/files/321323741/SW2010_SP0.0_Win32.part03.rar http://rapidshare.com/files/321323748/SW2010_SP0.0_Win32.part04.rar http://rapidshare.com/files/321323743/SW2010_SP0.0_Win32.part05.rar http://rapidshare.com/files/321335683/SW2010_SP0.0_Win32.part06.rar http://rapidshare.com/files/321335699/SW2010_SP0.0_Win32.part07.rar http://rapidshare.com/files/321335718/SW2010_SP0.0_Win32.part08.rar http://rapidshare.com/files/321335792/SW2010_SP0.0_Win32.part09.rar http://rapidshare.com/files/321335811/SW2010_SP0.0_Win32.part10.rar http://rapidshare.com/files/321355234/SW2010_SP0.0_Win32.part11.rar http://rapidshare.com/files/321355321/SW2010_SP0.0_Win32.part12.rar http://rapidshare.com/files/321355288/SW2010_SP0.0_Win32.part13.rar http://rapidshare.com/files/321355208/SW2010_SP0.0_Win32.part14.rar http://rapidshare.com/files/321355206/SW2010_SP0.0_Win32.part15.rar http://rapidshare.com/files/321372528/SW2010_SP0.0_Win32.part16.rar http://rapidshare.com/files/321372487/SW2010_SP0.0_Win32.part17.rar http://rapidshare.com/files/321372845/SW2010_SP0.0_Win32.part18.rar http://rapidshare.com/files/321372868/SW2010_SP0.0_Win32.part19.rar http://rapidshare.com/files/321391008/SW2010_SP0.0_Win32.part20.rar Title: Re: SolidWorks 2010 all versions Post by: PilotPTK on May 17, 2010, 05:04:03 05:04 Solidworks 2010 SP3.0 by SolidSquad
Title: Re: SolidWorks 2010 all versions Post by: hosmis on June 24, 2010, 04:05:43 04:05 SW2010 SP4.0 common (Win32 & Win64) Updates
eDrawings 2010 SP4.0 http://rapidshare.com/files/402019942/eDrawings2k10sp4.0.rar.html SW 2DEditor 2010 SP4.0 http://rapidshare.com/files/402023246/SW_2DEditor2k10sp4.0.rar.html SW Viewer 2010 SP4.0 http://rapidshare.com/files/402018586/swviewer2k10sp4.0.rar.html PhotoView 2010 SP4.0 Full Setup http://rapidshare.com/files/402034766/photoview2k10sp4.0_full.part1.rar.html http://rapidshare.com/files/402031914/photoview2k10sp4.0_full.part2.rar.html Updates only 0.0-4.0 http://rapidshare.com/files/402018049/photoview2k10-0.0-4.0-i.rar.html 1.0-4.0 http://rapidshare.com/files/402017889/photoview2k10-1.0-4.0-i.rar.html 2.0-4.0 http://rapidshare.com/files/402018165/photoview2k10-2.0-4.0-i.rar.html 2.1-4.0 http://rapidshare.com/files/402018298/photoview2k10-2.1-4.0-i.rar.html 3.0-4.0 http://rapidshare.com/files/402018374/photoview2k10-3.0-4.0-i.rar.html 3.1-4.0 http://rapidshare.com/files/402018511/photoview2k10-3.1-4.0-i.rar.html SW 2010 SP4.0 Help swHelp Chinese RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402027758/swHelpChinese2k10sp4.0.rar.html) swHelp Chinese-Simplified RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402028557/swHelpChinese-Simplified2k10sp4.0.rar.html) swHelp English RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402024335/swHelpEnglish2k10sp4.0.rar.html) swHelp German RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402029452/swHelpGerman2k10sp4.0.rar.html) swHelp Russian RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402025378/swHelpRussian2k10sp4.0.rar.html) swHelp Italian RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402031783/swHelpItalian2k10sp4.0.rar.html) swHelp Portuguese-Brazilian RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402032728/swHelpPortuguese-Brazilian2k10sp4.0.rar.html) SW2010 SP4.0 Win32 Updates SW 2010 Win32 core update (including SW Simulation and SW Motion updates) 0.0-4.0 http://rapidshare.com/files/401991631/sw2k10-0.0-4.0-i.part1.rar.html http://rapidshare.com/files/401991974/sw2k10-0.0-4.0-i.part2.rar.html 1.0-4.0 RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402008561/sw2k10-1.0-4.0-i.rar.html) 2.0-4.0 RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402007495/sw2k10-2.0-4.0-i.rar.html) 2.1-4.0 RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402007194/sw2k10-2.1-4.0-i.rar.html) 3.0-4.0 RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/401962021/sw2k10-3.0-4.0-i.rar.html) 3.1-4.0 RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/401966788/sw2k10-3.1-4.0-i.rar.html) COSMOSM 2010 SP4.0 Win32 RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402037661/cosmosm2k10sp4.0-i.rar.html) eDrwAPISDK 2010 SP4.0 RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402035535/eDrwAPISDK2k10sp4.0-i.rar.html) SW Document Manager API 2010 SP4.0 Win32 RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402035849/SW_Document_Manager_API_2k10sp4.0-i.rar.html) SW FlowSimulation 2010 SP4.0 Win32 Full setup RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402040995/flowsimulation2k10sp4.0_full-i.rar.html) Updates only 0.0-4.0 RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402036338/flowsimulation2k10-0.0-4.0-i.rar.html) 1.0-4.0 RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402036824/flowsimulation2k10-1.0-4.0-i.rar.html) 2.0-4.0 RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402037055/flowsimulation2k10-2.0-4.0-i.rar.html) 2.1-4.0 RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402037583/flowsimulation2k10-2.1-4.0-i.rar.html) 3.0-4.0 RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402037210/flowsimulation2k10-3.0-4.0-i.rar.html) 3.1-4.0 RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402037338/flowsimulation2k10-3.1-4.0-i.rar.html) PDM Works Server 2010 SP4.0 Win32 http://rapidshare.com/files/402046327/pdmwserver2k10sp4.0-i.part1.rar.html http://rapidshare.com/files/402045447/pdmwserver2k10sp4.0-i.part2.rar.html SW Explorer 2010 SP4.0 Win32 Full setup RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402044379/swexplorer2k10sp4.0_full-i.rar.html) Updates only 0.0-4.0 RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402039037/swexplorer2k10-0.0-4.0-i.rar.html) 1.0-4.0 RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402039104/swexplorer2k10-1.0-4.0-i.rar.html) 2.0-4.0 RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402040188/swexplorer2k10-2.0-4.0-i.rar.html) 2.1-4.0 RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402040169/swexplorer2k10-2.1-4.0-i.rar.html) 3.04.0 RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402040767/swexplorer2k10-3.0-4.0-i.rar.html) 3.1-4.0 RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402040829/swexplorer2k10-3.1-4.0-i.rar.html) SW2010 SP4.0 Win64 Updates SW 2010 SP4.0 Win64 core update (including SW Simulation and SW Motion updates) 0.0-4.0 http://rapidshare.com/files/402002589/sw2k10-0.0-4.0-x.part1.rar.html http://rapidshare.com/files/401996632/sw2k10-0.0-4.0-x.part2.rar.html 1.0-4.0 http://rapidshare.com/files/402012711/sw2k10-1.0-4.0-x.part1.rar.html http://rapidshare.com/files/402008559/sw2k10-1.0-4.0-x.part2.rar.html 2.0-4.0 http://rapidshare.com/files/402013737/sw2k10-2.0-4.0-x.part1.rar.html http://rapidshare.com/files/402009588/sw2k10-2.0-4.0-x.part2.rar.html 2.1-4.0 http://rapidshare.com/files/402017027/sw2k10-2.1-4.0-x.part1.rar.html http://rapidshare.com/files/402013723/sw2k10-2.1-4.0-x.part2.rar.html 3.0-4.0 RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/401974692/sw2k10-3.0-4.0-x.rar.html) 3.1-4.0 RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/401982050/sw2k10-3.1-4.0-x.rar.html) COSMOSM 2010 SP4.0 Win64 RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402048422/cosmosm2k10sp4.0-x.rar.html) eDrwAPISDK 2010 SP4.0 Win64 RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402046840/eDrwAPISDK2k10sp4.0-x.rar/html) SW Document Manager API 2010 SP4.0 Win64 RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402047100/SW_Document_Manager_API_2k10sp4.0-x.rar.html) SW FlowSimulation 2010 SP4.0 Win64 Full Setup RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402051794/flowsimulation2k10sp4.0_full-x.rar.html) Updates only 0.0-4.0 RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402047613/flowsimulation2k10-0.0-4.0-x.rar.html) 1.0-4.0 RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402047852/flowsimulation2k10-1.0-4.0-x.rar.html) 2.0-4.0 RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402048212/flowsimulation2k10-2.0-4.0-x.rar.html) 2.1-4.0 RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402048577/flowsimulation2k10-2.1-4.0-x.rar.html) 3.0-4.0 RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402048450/flowsimulation2k10-3.0-4.0-x.rar.html) 3.1-4.0 RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402048644/flowsimulation2k10-3.1-4.0-x.rar.html) PDM Works Server 2010 SP4.0 Win64 http://rapidshare.com/files/402058269/pdmwserver2k10sp4.0-x.part1.rar.html http://rapidshare.com/files/402058296/pdmwserver2k10sp4.0-x.part2.rar.html http://rapidshare.com/files/402060598/pdmwserver2k10sp4.0-x.part3.rar.html SW Explorer 2010 SP4.0 Win64 Full setup RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402057232/swexplorer2k10sp4.0_full-x.rar.html) Updates only 0.0-4.0 RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402050511/swexplorer2k10-0.0-4.0-x.rar.html) 1.0-4.0 RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402050507/swexplorer2k10-1.0-4.0-x.rar.html) 2.0-4.0 RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402052008/swexplorer2k10-2.0-4.0-x.rar.html) 2.1-4.0 RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402052111/swexplorer2k10-2.1-4.0-x.rar.html) 3.0-4.0 RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402052561/swexplorer2k10-3.0-4.0-x.rar.html) 3.1-4.0 RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/402052745/swexplorer2k10-3.1-4.0-x.rar.html) Title: Re: SolidWorks 2010 all versions Post by: hosmis on June 30, 2010, 07:50:55 19:50 For SPxx crack :
http://rapidshare.com/files/402223113/__ra__k.rar Title: Solidworks 2011/2013 ... 32 + 64 bit All Versions in one place .. Post by: PilotPTK on October 19, 2010, 02:44:55 02:44 Hello Sonsivri,
First Copy available that I'm aware of. Released by SOLIDSQUAD (Good Releases). .torrent inside of RAR Includes Medicine Enjoy! Title: Re: SolidWorks 2010 SP4 Win64 cracks Post by: darik on October 19, 2010, 09:03:45 09:03 The above cracks aren't working for me on Win7 64bit.
So, here are the Solidworks SP4 Win64 cracks that worked. http://rapidshare.com/files/425927867/_SolidSQUAD_.rar Title: Re: SolidWorks 2010 all versions Post by: hosmis on October 19, 2010, 11:07:49 11:07 http://www.sonsivri.com/forum/index.php?topic=34200.0
Title: Re: Solidworks 2011 32 + 64 bit Post by: hosmis on October 20, 2010, 03:31:47 03:31 Copy/pasta :'( (thank you gear34)
Quote from: gear34;17725 (http://img213.imageshack.us/img213/3558/sw2011sp00.jpg) (http://img213.imageshack.us/my.php?image=sw2011sp00.jpg) [COLOR="red"]SolidWorks 2011 SP0.0 MULTiLANGUAGE x32[/COLOR] http://hotfile.com/dl/77087128/9f04782/SW201186.part01.rar.html (http://hotfile.com/dl/77087128/9f04782/SW201186.part01.rar.html) http://hotfile.com/dl/77087102/e814b5c/SW201186.part02.rar.html (http://hotfile.com/dl/77087102/e814b5c/SW201186.part02.rar.html) http://hotfile.com/dl/77087119/6441d83/SW201186.part03.rar.html (http://hotfile.com/dl/77087119/6441d83/SW201186.part03.rar.html) http://hotfile.com/dl/77087125/46673ad/SW201186.part04.rar.html (http://hotfile.com/dl/77087125/46673ad/SW201186.part04.rar.html) http://hotfile.com/dl/77087129/08af30f/SW201186.part05.rar.html (http://hotfile.com/dl/77087129/08af30f/SW201186.part05.rar.html) http://hotfile.com/dl/77087127/38228cd/SW201186.part06.rar.html (http://hotfile.com/dl/77087127/38228cd/SW201186.part06.rar.html) http://hotfile.com/dl/77087101/960a3c2/SW201186.part07.rar.html (http://hotfile.com/dl/77087101/960a3c2/SW201186.part07.rar.html) http://hotfile.com/dl/77087124/8e387bc/SW201186.part08.rar.html (http://hotfile.com/dl/77087124/8e387bc/SW201186.part08.rar.html) http://hotfile.com/dl/77087109/f2215a4/SW201186.part09.rar.html (http://hotfile.com/dl/77087109/f2215a4/SW201186.part09.rar.html) http://hotfile.com/dl/77087112/9adae79/SW201186.part10.rar.html (http://hotfile.com/dl/77087112/9adae79/SW201186.part10.rar.html) http://hotfile.com/dl/77087115/a4a1bda/SW201186.part11.rar.html (http://hotfile.com/dl/77087115/a4a1bda/SW201186.part11.rar.html) http://hotfile.com/dl/77087105/03fdc85/SW201186.part12.rar.html (http://hotfile.com/dl/77087105/03fdc85/SW201186.part12.rar.html) http://hotfile.com/dl/77087104/26ac325/SW201186.part13.rar.html (http://hotfile.com/dl/77087104/26ac325/SW201186.part13.rar.html) http://hotfile.com/dl/77087114/8ee17a9/SW201186.part14.rar.html (http://hotfile.com/dl/77087114/8ee17a9/SW201186.part14.rar.html) http://hotfile.com/dl/77087117/d5e1ecb/SW201186.part15.rar.html (http://hotfile.com/dl/77087117/d5e1ecb/SW201186.part15.rar.html) http://hotfile.com/dl/77087106/53fd767/SW201186.part16.rar.html (http://hotfile.com/dl/77087106/53fd767/SW201186.part16.rar.html) http://hotfile.com/dl/77087103/01dd8d4/SW201186.part17.rar.html (http://hotfile.com/dl/77087103/01dd8d4/SW201186.part17.rar.html) http://hotfile.com/dl/77087116/a7c540c/SW201186.part18.rar.html (http://hotfile.com/dl/77087116/a7c540c/SW201186.part18.rar.html) http://hotfile.com/dl/77087110/97ff04e/SW201186.part19.rar.html (http://hotfile.com/dl/77087110/97ff04e/SW201186.part19.rar.html) http://hotfile.com/dl/77087120/4c6c4bd/SW201186.part20.rar.html (http://hotfile.com/dl/77087120/4c6c4bd/SW201186.part20.rar.html) http://hotfile.com/dl/77087107/ba1fb92/SW201186.part21.rar.html (http://hotfile.com/dl/77087107/ba1fb92/SW201186.part21.rar.html) http://hotfile.com/dl/77087118/6466e5d/SW201186.part22.rar.html (http://hotfile.com/dl/77087118/6466e5d/SW201186.part22.rar.html) alternatif http://www.fileserve.com/file/79rX7Uu/SW201186.part01.rar (http://www.fileserve.com/file/79rX7Uu/SW201186.part01.rar) http://www.fileserve.com/file/yKH4HuQ/SW201186.part02.rar (http://www.fileserve.com/file/yKH4HuQ/SW201186.part02.rar) http://www.fileserve.com/file/qbfZ6KZ/SW201186.part03.rar (http://www.fileserve.com/file/qbfZ6KZ/SW201186.part03.rar) http://www.fileserve.com/file/4P7UGX5/SW201186.part04.rar (http://www.fileserve.com/file/4P7UGX5/SW201186.part04.rar) http://www.fileserve.com/file/hhRUBqJ/SW201186.part05.rar (http://www.fileserve.com/file/hhRUBqJ/SW201186.part05.rar) http://www.fileserve.com/file/xCXR4Zx/SW201186.part06.rar (http://www.fileserve.com/file/xCXR4Zx/SW201186.part06.rar) http://www.fileserve.com/file/cJxWWNJ/SW201186.part07.rar (http://www.fileserve.com/file/cJxWWNJ/SW201186.part07.rar) http://www.fileserve.com/file/KTsBJFH/SW201186.part08.rar (http://www.fileserve.com/file/KTsBJFH/SW201186.part08.rar) http://www.fileserve.com/file/FPcag29/SW201186.part09.rar (http://www.fileserve.com/file/FPcag29/SW201186.part09.rar) http://www.fileserve.com/file/srmV65a/SW201186.part10.rar (http://www.fileserve.com/file/srmV65a/SW201186.part10.rar) http://www.fileserve.com/file/SWf6jaw/SW201186.part11.rar (http://www.fileserve.com/file/SWf6jaw/SW201186.part11.rar) http://www.fileserve.com/file/3PPrcjt/SW201186.part12.rar (http://www.fileserve.com/file/3PPrcjt/SW201186.part12.rar) http://www.fileserve.com/file/mh8rbjN/SW201186.part13.rar (http://www.fileserve.com/file/mh8rbjN/SW201186.part13.rar) http://www.fileserve.com/file/xuvt5Yn/SW201186.part14.rar (http://www.fileserve.com/file/xuvt5Yn/SW201186.part14.rar) http://www.fileserve.com/file/SxsRGn9/SW201186.part15.rar (http://www.fileserve.com/file/SxsRGn9/SW201186.part15.rar) http://www.fileserve.com/file/ZSesey6/SW201186.part16.rar (http://www.fileserve.com/file/ZSesey6/SW201186.part16.rar) http://www.fileserve.com/file/TYJ9jjV/SW201186.part17.rar (http://www.fileserve.com/file/TYJ9jjV/SW201186.part17.rar) http://www.fileserve.com/file/cKztKX3/SW201186.part18.rar (http://www.fileserve.com/file/cKztKX3/SW201186.part18.rar) http://www.fileserve.com/file/pjFmMEX/SW201186.part19.rar (http://www.fileserve.com/file/pjFmMEX/SW201186.part19.rar) http://www.fileserve.com/file/febNvzQ/SW201186.part20.rar (http://www.fileserve.com/file/febNvzQ/SW201186.part20.rar) http://www.fileserve.com/file/QsEWUHF/SW201186.part21.rar (http://www.fileserve.com/file/QsEWUHF/SW201186.part21.rar) http://www.fileserve.com/file/R7BGNGN/SW201186.part22.rar (http://www.fileserve.com/file/R7BGNGN/SW201186.part22.rar) [COLOR="red"]SolidWorks 2011 SP0.0 MULTiLANGUAGE x64[/COLOR] http://hotfile.com/dl/77086597/14d2f5f/SW201164.part01.rar.html (http://hotfile.com/dl/77086597/14d2f5f/SW201164.part01.rar.html) http://hotfile.com/dl/77086582/e22d80d/SW201164.part02.rar.html (http://hotfile.com/dl/77086582/e22d80d/SW201164.part02.rar.html) http://hotfile.com/dl/77086593/9ac74a7/SW201164.part03.rar.html (http://hotfile.com/dl/77086593/9ac74a7/SW201164.part03.rar.html) http://hotfile.com/dl/77086611/e2be405/SW201164.part04.rar.html (http://hotfile.com/dl/77086611/e2be405/SW201164.part04.rar.html) http://hotfile.com/dl/77086589/be231cd/SW201164.part05.rar.html (http://hotfile.com/dl/77086589/be231cd/SW201164.part05.rar.html) http://hotfile.com/dl/77086592/224118a/SW201164.part06.rar.html (http://hotfile.com/dl/77086592/224118a/SW201164.part06.rar.html) http://hotfile.com/dl/77086598/806429d/SW201164.part07.rar.html (http://hotfile.com/dl/77086598/806429d/SW201164.part07.rar.html) http://hotfile.com/dl/77086590/bbae217/SW201164.part08.rar.html (http://hotfile.com/dl/77086590/bbae217/SW201164.part08.rar.html) http://hotfile.com/dl/77086605/3a0e33f/SW201164.part09.rar.html (http://hotfile.com/dl/77086605/3a0e33f/SW201164.part09.rar.html) http://hotfile.com/dl/77086606/b9dd92f/SW201164.part10.rar.html (http://hotfile.com/dl/77086606/b9dd92f/SW201164.part10.rar.html) http://hotfile.com/dl/77086585/7439645/SW201164.part11.rar.html (http://hotfile.com/dl/77086585/7439645/SW201164.part11.rar.html) http://hotfile.com/dl/77086584/0b3fd4f/SW201164.part12.rar.html (http://hotfile.com/dl/77086584/0b3fd4f/SW201164.part12.rar.html) http://hotfile.com/dl/77086609/087ce29/SW201164.part13.rar.html (http://hotfile.com/dl/77086609/087ce29/SW201164.part13.rar.html) http://hotfile.com/dl/77086612/2a3dd20/SW201164.part14.rar.html (http://hotfile.com/dl/77086612/2a3dd20/SW201164.part14.rar.html) http://hotfile.com/dl/77086594/e547360/SW201164.part15.rar.html (http://hotfile.com/dl/77086594/e547360/SW201164.part15.rar.html) http://hotfile.com/dl/77086595/ca95cc0/SW201164.part16.rar.html (http://hotfile.com/dl/77086595/ca95cc0/SW201164.part16.rar.html) http://hotfile.com/dl/77086610/b975853/SW201164.part17.rar.html (http://hotfile.com/dl/77086610/b975853/SW201164.part17.rar.html) http://hotfile.com/dl/77086588/fe063f5/SW201164.part18.rar.html (http://hotfile.com/dl/77086588/fe063f5/SW201164.part18.rar.html) http://hotfile.com/dl/77086583/cc03ea0/SW201164.part19.rar.html (http://hotfile.com/dl/77086583/cc03ea0/SW201164.part19.rar.html) http://hotfile.com/dl/77086608/6703e62/SW201164.part20.rar.html (http://hotfile.com/dl/77086608/6703e62/SW201164.part20.rar.html) http://hotfile.com/dl/77086596/0f8a26e/SW201164.part21.rar.html (http://hotfile.com/dl/77086596/0f8a26e/SW201164.part21.rar.html) http://hotfile.com/dl/77086591/bce1266/SW201164.part22.rar.html (http://hotfile.com/dl/77086591/bce1266/SW201164.part22.rar.html) http://hotfile.com/dl/77086604/f2d6e58/SW201164.part23.rar.html (http://hotfile.com/dl/77086604/f2d6e58/SW201164.part23.rar.html) alternatif http://www.fileserve.com/file/WFDUKXh/SW201164.part01.rar (http://www.fileserve.com/file/WFDUKXh/SW201164.part01.rar) http://www.fileserve.com/file/ARTagVp/SW201164.part02.rar (http://www.fileserve.com/file/ARTagVp/SW201164.part02.rar) http://www.fileserve.com/file/UeKthWY/SW201164.part03.rar (http://www.fileserve.com/file/UeKthWY/SW201164.part03.rar) http://www.fileserve.com/file/ERFZ2rf/SW201164.part04.rar (http://www.fileserve.com/file/ERFZ2rf/SW201164.part04.rar) http://www.fileserve.com/file/2Ab28PC/SW201164.part05.rar (http://www.fileserve.com/file/2Ab28PC/SW201164.part05.rar) http://www.fileserve.com/file/ykXMP6e/SW201164.part06.rar (http://www.fileserve.com/file/ykXMP6e/SW201164.part06.rar) http://www.fileserve.com/file/J89USwv/SW201164.part07.rar (http://www.fileserve.com/file/J89USwv/SW201164.part07.rar) http://www.fileserve.com/file/vGP4x9E/SW201164.part08.rar (http://www.fileserve.com/file/vGP4x9E/SW201164.part08.rar) http://www.fileserve.com/file/QkWV45B/SW201164.part09.rar (http://www.fileserve.com/file/QkWV45B/SW201164.part09.rar) http://www.fileserve.com/file/P63tZ7g/SW201164.part10.rar (http://www.fileserve.com/file/P63tZ7g/SW201164.part10.rar) http://www.fileserve.com/file/VJRNbV5/SW201164.part11.rar (http://www.fileserve.com/file/VJRNbV5/SW201164.part11.rar) http://www.fileserve.com/file/acN9J8R/SW201164.part12.rar (http://www.fileserve.com/file/acN9J8R/SW201164.part12.rar) http://www.fileserve.com/file/j3MfTUq/SW201164.part13.rar (http://www.fileserve.com/file/j3MfTUq/SW201164.part13.rar) http://www.fileserve.com/file/ZuEd5YV/SW201164.part14.rar (http://www.fileserve.com/file/ZuEd5YV/SW201164.part14.rar) http://www.fileserve.com/file/XvGEBnD/SW201164.part15.rar (http://www.fileserve.com/file/XvGEBnD/SW201164.part15.rar) http://www.fileserve.com/file/vKGHV6r/SW201164.part16.rar (http://www.fileserve.com/file/vKGHV6r/SW201164.part16.rar) http://www.fileserve.com/file/APR3b5f/SW201164.part17.rar (http://www.fileserve.com/file/APR3b5f/SW201164.part17.rar) http://www.fileserve.com/file/c4wcJV4/SW201164.part18.rar (http://www.fileserve.com/file/c4wcJV4/SW201164.part18.rar) http://www.fileserve.com/file/BvcsvBu/SW201164.part19.rar (http://www.fileserve.com/file/BvcsvBu/SW201164.part19.rar) http://www.fileserve.com/file/35C3njw/SW201164.part20.rar (http://www.fileserve.com/file/35C3njw/SW201164.part20.rar) http://www.fileserve.com/file/ZzU7Yhc/SW201164.part21.rar (http://www.fileserve.com/file/ZzU7Yhc/SW201164.part21.rar) http://www.fileserve.com/file/SqtJfkq/SW201164.part22.rar (http://www.fileserve.com/file/SqtJfkq/SW201164.part22.rar) http://www.fileserve.com/file/KECVSmx/SW201164.part23.rar (http://www.fileserve.com/file/KECVSmx/SW201164.part23.rar)[/CENTER] Title: Re: SolidWorks 2010 all versions Post by: technovm on October 20, 2010, 05:47:34 05:47 For SPxx crack : http://rapidshare.com/files/402223113/__ra__k.rar swexplorer2pdmworks_crk.exe has Trojan Downloader Title: Re: Solidworks 2011 32 + 64 bit Post by: mhtplsh on December 06, 2010, 10:09:30 10:09 downloaded. but when extracting .iso fiel getting the following error.
"write error in the file SW2001186\sw2011_sp0_x86_SSQ.iso. Probably the disk is full" There is lot of space say 20GB on harddisk. This heppens on the extraction upto 21% & when .05 rar is in use. Kindly help me in the matter, Title: Re: Solidworks 2011 32 + 64 bit Post by: sgoum on December 06, 2010, 10:55:00 10:55 Propably your HD has Fat and not NTFS
Title: Re: Solidworks 2011 32 + 64 bit Post by: mhtplsh on December 06, 2010, 03:31:41 15:31 If it is fat32, it goes upto 4.7gb. So i used the another computer with NTFS. but still the same problem.
Today now i am downloading .05 rar part from another file server. I will check it tomorrow. Title: Re: Solidworks 2011 32 + 64 bit Post by: Kombinator on February 04, 2011, 06:57:28 18:57 Final, this hosmis link , after instal ... and activating work or not?
Title: Re: Solidworks 2011 32 + 64 bit Post by: hosmis on February 05, 2011, 07:34:49 07:34 (http://img193.imageshack.us/img193/3130/34838354.jpg) (http://img193.imageshack.us/i/34838354.jpg/)
Uploaded with ImageShack.us (http://imageshack.us) SW2011 SP2.0 Update Only SSQ Torrent http://www.multiupload.com/YH13NDQDLC [co HOW MANY TIMES DO NOT CODE YOUR LINKSde] SolidWorks 2011 SP2.0 MULTiLANGUAGE - WiN32 http://hotfile.com/dl/98026278/d196507/SW2011.SP2.0.Win32.part01.rar.html http://hotfile.com/dl/98026281/e3884a3/SW2011.SP2.0.Win32.part02.rar.html http://hotfile.com/dl/98026280/9006e3c/SW2011.SP2.0.Win32.part03.rar.html http://hotfile.com/dl/98026279/f438bda/SW2011.SP2.0.Win32.part04.rar.html http://hotfile.com/dl/98026282/931fb95/SW2011.SP2.0.Win32.part05.rar.html http://hotfile.com/dl/98026302/77ada3e/SW2011.SP2.0.Win32.part06.rar.html http://hotfile.com/dl/98026283/891fc1a/SW2011.SP2.0.Win32.part07.rar.html http://hotfile.com/dl/98026292/51a905a/SW2011.SP2.0.Win32.part08.rar.html http://hotfile.com/dl/98026284/050055e/SW2011.SP2.0.Win32.part09.rar.html http://hotfile.com/dl/98026285/d8b0013/SW2011.SP2.0.Win32.part10.rar.html http://hotfile.com/dl/98026386/a8972ca/SW2011.SP2.0.Win32.part11.rar.html http://hotfile.com/dl/98026387/e098950/SW2011.SP2.0.Win32.part12.rar.html http://hotfile.com/dl/98026388/847d449/SW2011.SP2.0.Win32.part13.rar.html http://hotfile.com/dl/98026389/a10656b/SW2011.SP2.0.Win32.part14.rar.html http://hotfile.com/dl/98026391/9aeeb1e/SW2011.SP2.0.Win32.part15.rar.html alternatif http://www.fileserve.com/file/3JUfPq8/SW2011.SP2.0.Win32.part01.rar http://www.fileserve.com/file/k9AFZeq/SW2011.SP2.0.Win32.part02.rar http://www.fileserve.com/file/cEvPAEN/SW2011.SP2.0.Win32.part03.rar http://www.fileserve.com/file/DzxaX8s/SW2011.SP2.0.Win32.part04.rar http://www.fileserve.com/file/vFpS2wb/SW2011.SP2.0.Win32.part05.rar http://www.fileserve.com/file/tJmdmRJ/SW2011.SP2.0.Win32.part06.rar http://www.fileserve.com/file/nMQpmy4/SW2011.SP2.0.Win32.part07.rar http://www.fileserve.com/file/uE3zQWq/SW2011.SP2.0.Win32.part08.rar http://www.fileserve.com/file/HkhNwgt/SW2011.SP2.0.Win32.part09.rar http://www.fileserve.com/file/7yyFGSt/SW2011.SP2.0.Win32.part10.rar http://www.fileserve.com/file/GshsDEh/SW2011.SP2.0.Win32.part11.rar http://www.fileserve.com/file/v2VmhgF/SW2011.SP2.0.Win32.part12.rar http://www.fileserve.com/file/pTBwQtG/SW2011.SP2.0.Win32.part13.rar http://www.fileserve.com/file/zERx66y/SW2011.SP2.0.Win32.part14.rar http://www.fileserve.com/file/2BJfXJX/SW2011.SP2.0.Win32.part15.rar alternatif http://www.filesonic.com/file/60859429/SW2011.SP2.0.Win32.part01.rar http://www.filesonic.com/file/60859077/SW2011.SP2.0.Win32.part02.rar http://www.filesonic.com/file/60859085/SW2011.SP2.0.Win32.part03.rar http://www.filesonic.com/file/60859057/SW2011.SP2.0.Win32.part04.rar http://www.filesonic.com/file/60859407/SW2011.SP2.0.Win32.part05.rar http://www.filesonic.com/file/60859439/SW2011.SP2.0.Win32.part06.rar http://www.filesonic.com/file/60859651/SW2011.SP2.0.Win32.part07.rar http://www.filesonic.com/file/60859127/SW2011.SP2.0.Win32.part08.rar http://www.filesonic.com/file/60859649/SW2011.SP2.0.Win32.part09.rar http://www.filesonic.com/file/60859423/SW2011.SP2.0.Win32.part10.rar http://www.filesonic.com/file/60859081/SW2011.SP2.0.Win32.part11.rar http://www.filesonic.com/file/60859421/SW2011.SP2.0.Win32.part12.rar http://www.filesonic.com/file/60859053/SW2011.SP2.0.Win32.part13.rar http://www.filesonic.com/file/60859051/SW2011.SP2.0.Win32.part14.rar http://www.filesonic.com/file/60859365/SW2011.SP2.0.Win32.part15.rar SolidWorks 2011 SP2.0 MULTiLANGUAGE - WiN64 http://hotfile.com/dl/98028540/73c495a/SW2011.SP2.0.Win64.part01.rar.html http://hotfile.com/dl/98028535/a9254b6/SW2011.SP2.0.Win64.part02.rar.html http://hotfile.com/dl/98028537/6c7cfaa/SW2011.SP2.0.Win64.part03.rar.html http://hotfile.com/dl/98028538/9f29999/SW2011.SP2.0.Win64.part04.rar.html http://hotfile.com/dl/98028536/a356249/SW2011.SP2.0.Win64.part05.rar.html http://hotfile.com/dl/98028542/75b14ac/SW2011.SP2.0.Win64.part06.rar.html http://hotfile.com/dl/98028543/2b61961/SW2011.SP2.0.Win64.part07.rar.html http://hotfile.com/dl/98028544/e25d565/SW2011.SP2.0.Win64.part08.rar.html http://hotfile.com/dl/98028539/ff16e50/SW2011.SP2.0.Win64.part09.rar.html http://hotfile.com/dl/98028541/264e79c/SW2011.SP2.0.Win64.part10.rar.html http://hotfile.com/dl/98028621/4ed2105/SW2011.SP2.0.Win64.part11.rar.html http://hotfile.com/dl/98028628/c22618e/SW2011.SP2.0.Win64.part12.rar.html http://hotfile.com/dl/98028642/7267bd3/SW2011.SP2.0.Win64.part13.rar.html http://hotfile.com/dl/98028647/304bb1b/SW2011.SP2.0.Win64.part14.rar.html http://hotfile.com/dl/98028649/f406f06/SW2011.SP2.0.Win64.part15.rar.html http://hotfile.com/dl/98028651/7d4e39c/SW2011.SP2.0.Win64.part16.rar.html http://hotfile.com/dl/98028652/8edccb0/SW2011.SP2.0.Win64.part17.rar.html alternatif http://www.fileserve.com/file/Kkjevtj/SW2011.SP2.0.Win64.part01.rar http://www.fileserve.com/file/64cnUYf/SW2011.SP2.0.Win64.part02.rar http://www.fileserve.com/file/mnm9QFa/SW2011.SP2.0.Win64.part03.rar http://www.fileserve.com/file/ZCJV76g/SW2011.SP2.0.Win64.part04.rar http://www.fileserve.com/file/2tThS87/SW2011.SP2.0.Win64.part05.rar http://www.fileserve.com/file/KUtyXnv/SW2011.SP2.0.Win64.part06.rar http://www.fileserve.com/file/9HQ8ndX/SW2011.SP2.0.Win64.part07.rar http://www.fileserve.com/file/veZzFpj/SW2011.SP2.0.Win64.part08.rar http://www.fileserve.com/file/DRnd8E5/SW2011.SP2.0.Win64.part09.rar http://www.fileserve.com/file/NCkWDEQ/SW2011.SP2.0.Win64.part10.rar http://www.fileserve.com/file/Bg69mXt/SW2011.SP2.0.Win64.part11.rar http://www.fileserve.com/file/4JyPcN7/SW2011.SP2.0.Win64.part12.rar http://www.fileserve.com/file/pJ6rxaR/SW2011.SP2.0.Win64.part13.rar http://www.fileserve.com/file/2ymEdgg/SW2011.SP2.0.Win64.part14.rar http://www.fileserve.com/file/PyDsDkw/SW2011.SP2.0.Win64.part15.rar http://www.fileserve.com/file/YQedRJF/SW2011.SP2.0.Win64.part16.rar http://www.fileserve.com/file/u5V9WRH/SW2011.SP2.0.Win64.part17.rar alternatif http://www.filesonic.com/file/60863343/SW2011.SP2.0.Win64.part01.rar http://www.filesonic.com/file/60863669/SW2011.SP2.0.Win64.part02.rar http://www.filesonic.com/file/60863333/SW2011.SP2.0.Win64.part03.rar http://www.filesonic.com/file/60863325/SW2011.SP2.0.Win64.part04.rar http://www.filesonic.com/file/60863317/SW2011.SP2.0.Win64.part05.rar http://www.filesonic.com/file/60863911/SW2011.SP2.0.Win64.part06.rar http://www.filesonic.com/file/60863321/SW2011.SP2.0.Win64.part07.rar http://www.filesonic.com/file/60863329/SW2011.SP2.0.Win64.part08.rar http://www.filesonic.com/file/60863341/SW2011.SP2.0.Win64.part09.rar http://www.filesonic.com/file/60863323/SW2011.SP2.0.Win64.part10.rar http://www.filesonic.com/file/60863335/SW2011.SP2.0.Win64.part11.rar http://www.filesonic.com/file/60863655/SW2011.SP2.0.Win64.part12.rar http://www.filesonic.com/file/60864053/SW2011.SP2.0.Win64.part13.rar http://www.filesonic.com/file/60863909/SW2011.SP2.0.Win64.part14.rar http://www.filesonic.com/file/60863907/SW2011.SP2.0.Win64.part15.rar http://www.filesonic.com/file/60863319/SW2011.SP2.0.Win64.part16.rar http://www.filesonic.com/file/60863279/SW2011.SP2.0.Win64.part17.rar [/co ALSO Cut&Paste de] Password : CNCTeknik.NET Title: Re: Solidworks 2011 32 + 64 bit Post by: gan_canny on March 02, 2011, 02:38:14 14:38 Downloaded SW2011.SP2.0.Win32 ..Does it require an original version of Solidworks ?
It appears to be just an update. Title: Re: Solidworks 2011 32 + 64 bit Post by: sphinx on March 02, 2011, 05:56:51 17:56 from my experience with with solidworks u need to get the sp0 release its most likely an update, still using 2008 not tried 2010 or 2011
/sph Title: Re: Solidworks 2011 32 + 64 bit Post by: hosmis on March 02, 2011, 06:06:35 18:06 working , no problem ...
2011sp2.0 , multi language... Title: Re: Solidworks 2011 32 + 64 bit Post by: Redhouse on March 03, 2011, 10:39:44 22:39 Is there a separate torrent for the Win64 version? or does the version in the torrent have both Win32 and Win64?
(I have no idea, that's why I ask) Title: Re: Solidworks 2011 32 + 64 bit Post by: DarkClover on March 04, 2011, 12:08:25 00:08 I've got Solidworks 2011 SP0.0 and it works fine. But to be up to date, does anybody know where
I can download just SP2.0 (not the whole program) for SWX 2011 ? Are there some very important updates or patches which came since SP0.0 ? Title: Re: Solidworks 2011 32 + 64 bit Post by: mhtplsh on April 22, 2011, 12:47:48 12:47 I've got Solidworks 2011 SP0.0 and it works fine. I tried first copy with SOLIDSQUAD medicine. I installed x32 version on x64 machine. I think so i failed. please guide me. Title: Re: Solidworks 2011 32 + 64 bit Post by: DarkClover on April 22, 2011, 01:44:40 13:44 I tried first copy with SOLIDSQUAD medicine. I installed x32 version on x64 machine. I think so i failed. please guide me. How did you manage to install x32 SolidWorks on a x64 machine ? If I tried that the installer of x32-version told me this is not a 64-bit machine, try another version. However the SOLIDSQUAD med. works on 32- and 64-bit versions. So what's the error ? Did you follow the ReadMe exactly ? Maybe try to install the 64-bit version. It could be that SolidWorks does not work correctly if it's 32-bit. Title: Re: Solidworks 2011 32 + 64 bit Post by: hosmis on April 22, 2011, 03:48:59 15:48 SolidWorks 2011 SP3.0 Updates Only 32bit & 64bit SSQ
Only Update ... 1. It's Update only! To install it you need SW2011 to be preinstalled! 2. If you are using not English SW2011 you need to install Localization Updates too! (if you need other localization updates let me know and I will share links for them) 3. As crack use the same SW2011 Activation by SSQ I shared befor SolidWorks 2011 SP3.0 Updates Only 32bit & 64bit SSQ Torrent http://www.multiupload.com/1LFH6WUW36 SolidWorks 2011 SP3.0 Updates Only 32bit & 64bit SSQ Link http://www.fileserve.com/file/JyMWBFP http://www.fileserve.com/file/2TZ4Y5H http://www.fileserve.com/file/DQPT3B8 http://www.fileserve.com/file/dum8cap http://www.fileserve.com/file/fQTgn6w http://www.fileserve.com/file/Ccbz7wB http://www.fileserve.com/file/zFxDGQE http://www.fileserve.com/file/gGgYHPg http://www.fileserve.com/file/kXzfPZ9 http://www.fileserve.com/file/ERsQ7aQ http://www.fileserve.com/file/fTBwvyq http://www.fileserve.com/file/AjA3M8u http://www.fileserve.com/file/2VmvQPa http://www.fileserve.com/file/3BDdwt6 http://www.fileserve.com/file/jHb37AP http://www.fileserve.com/file/pNAM9Ye http://www.fileserve.com/file/cFhaPMM http://www.fileserve.com/file/Hz77tzE http://www.fileserve.com/file/4bZxBMP alternatif http://www.filesonic.com/file/338717311 http://www.filesonic.com/file/338725591 http://www.filesonic.com/file/338721811 http://www.filesonic.com/file/338677314 http://www.filesonic.com/file/338725271 http://www.filesonic.com/file/338728521 http://www.filesonic.com/file/338672544 http://www.filesonic.com/file/338716731 http://www.filesonic.com/file/338672114 http://www.filesonic.com/file/338708501 http://www.filesonic.com/file/338680014 http://www.filesonic.com/file/338680244 http://www.filesonic.com/file/338690024 http://www.filesonic.com/file/338685114 http://www.filesonic.com/file/338685804 http://www.filesonic.com/file/338692754 http://www.filesonic.com/file/338694824 http://www.filesonic.com/file/338692814 http://www.filesonic.com/file/338695004 alternatif http://uploading.com/files/5939c1d4/FSW.part01.rar/ http://uploading.com/files/2e98adf7/FSW.part02.rar/ http://uploading.com/files/mcb5815e/FSW.part03.rar/ http://uploading.com/files/4c54c122/FSW.part04.rar/ http://uploading.com/files/7726576d/FSW.part05.rar/ http://uploading.com/files/c92f1df9/FSW.part06.rar/ http://uploading.com/files/a5da86fe/FSW.part07.rar/ http://uploading.com/files/aef3a4cd/FSW.part08.rar/ http://uploading.com/files/48fd6578/FSW.part09.rar/ http://uploading.com/files/73d59d35/FSW.part10.rar/ http://uploading.com/files/c13ce88m/FSW.part11.rar/ http://uploading.com/files/f9m58b3b/FSW.part12.rar/ http://uploading.com/files/249498ee/FSW.part13.rar/ http://uploading.com/files/c642544f/FSW.part14.rar/ http://uploading.com/files/a285e5cc/FSW.part15.rar/ http://uploading.com/files/14d34e58/FSW.part16.rar/ http://uploading.com/files/cd8em65e/FSW.part17.rar/ http://uploading.com/files/me3b5ad8/FSW.part18.rar/ http://uploading.com/files/m2758b76/FSW.part19.rar/ http://uploading.com/files/c7aec27e/FSW.part20.rar/ http://uploading.com/files/43251a5e/FSW.part21.rar/ http://uploading.com/files/59me54fe/FSW.part22.rar/ http://uploading.com/files/bc7a5a5f/SW.part01.rar/ http://uploading.com/files/b6e8cm44/SW.part02.rar/ http://uploading.com/files/ddd181ad/SW.part03.rar/ http://uploading.com/files/74eaa2d9/SW.part04.rar/ http://uploading.com/files/58m18c3a/SW.part05.rar/ http://uploading.com/files/e12f5mm9/SW.part06.rar/ http://uploading.com/files/cca473df/SW.part07.rar/ http://uploading.com/files/em2mf22m/SW.part08.rar/ http://uploading.com/files/82dc1489/SW.part09.rar/ http://uploading.com/files/313845f5/SW.part10.rar/ http://uploading.com/files/c1f93336/SW.part11.rar/ http://uploading.com/files/847m7d51/SW.part12.rar/ http://uploading.com/files/1e93df6b/SW.part13.rar/ http://uploading.com/files/25b51814/SW.part14.rar/ http://uploading.com/files/97d2d2c3/SW.part15.rar/ http://uploading.com/files/c6455266/SW.part16.rar/ http://uploading.com/files/fd2cea4b/SW.part17.rar/ http://uploading.com/files/ef94a8me/SW.part18.rar/ http://uploading.com/files/728ca8ef/SW.part19.rar/ Title: Re: Solidworks 2011 32 + 64 bit Post by: Redhouse on April 28, 2011, 03:06:14 03:06 Are the updates cumulative?
If I install SW-2011-SP.0 can I then apply SP.3? ...or... do I have to apply SP.1->SP.2, and finally SP.3? (these downloads are huge) Title: Re: Solidworks 2011 32 + 64 bit Post by: hosmis on April 28, 2011, 08:33:05 08:33 Update only.
sp0>sp3 sp1>sp3 sp2>sp3 Multi language 32bit & 64bit Title: Re: Solidworks 2011 32 + 64 bit Post by: Redhouse on May 26, 2011, 02:56:06 14:56 Are the updates cumulative?
If I install SW-2011-SP.0 can I then apply SP.3? ...or... do I have to apply SP.1->SP.2, and finally SP.3? (these downloads are huge) Title: Re: Solidworks 2011 32 + 64 bit Post by: hosmis on May 26, 2011, 03:04:48 15:04 Yes...
If you install SW-2011-SP.0 sp0>sp3 or : If you install SW-2011-SP.0 and sp0>sp1 sp1>sp3 or : If you install SW-2011-SP.0 and sp0>sp1 and sp1>sp2 sp2>sp3 Title: Re: Solidworks 2011 32 + 64 bit Post by: mhtplsh on June 09, 2011, 05:40:04 05:40 Installed 64 bit on 64 bit machine.
For few days worked. But now says " thanks for using SOLIDWORKS". Thinks that my medicine not worked. Help me in the matter. Title: Re: Solidworks 2011 32 + 64 bit Post by: cncbasher on June 09, 2011, 08:04:41 08:04 re-run the patch activation , also do not allow any online updates
Title: Re: Solidworks 2011 32 + 64 bit Post by: solutions on July 23, 2011, 11:13:50 11:13 SP4 x32 stripped from 38G to 5G (no x64 stuff, only english & russian):
SolidWorks Premium 2011 - computer-aided design, engineering analysis and manufacture of products of any complexity and purpose. - SolidWorks Routing: Piping using libraries of standard elements. Creating a modular, curved, as well as the combined pipeline. Creating elements of the flexible wires (pipes, hoses, etc.). Library of standard parts, pipes (GOST, ANSI, ISO, DIN ...). Automatic selection of standard sizes of standard components. - SolidWorks Simulation: strength analysis of structures (parts and assemblies) in an elastic band. The calculation of assemblies with the boundary conditions SolidWorks SimulationXpress. Using loads of SolidWorks Motion. - SolidWorks Motion: an integrated kinematic and dynamic analysis of mechanisms. - ScanTo3D: reverse engineering module. Convert point clouds to surface and solid models. - TolAnalyst: analysis of the size of chains in three-dimensional model of the assembly. Using the dimensions and tolerances DimXpert for analysis. Defining tolerance closing. Determining the degree of influence of size on closing. - CircuitWorks: import data from radio CAD (ECAD). Building a 3D model of the PCB on the imported data. Transfer the changed data in the CAD radio. Compare versions of the PCB. I think you'll need a premium account to get these: http://www.filesonic.com/file/1487879114/SolidWorks.2011.Premium.SP4.WIN32.part1.rar http://www.filesonic.com/file/1487850931/SolidWorks.2011.Premium.SP4.WIN32.part2.rar http://www.filesonic.com/file/1487744491/SolidWorks.2011.Premium.SP4.WIN32.part3.rar -------------------- I believe this is a full version. I don't have the disk space right now to install and try - sorry. For SW, unless it's a full version, you need to install each and every update release in sequence (a total pain, IMO). Title: Re: Solidworks 2011 32 + 64 bit Post by: DarkClover on July 23, 2011, 11:36:55 11:36 I have the SSQ release but it's still SP0.0
Is there any destination where I can download SP4.0 which is compatible with the Solid Squad release ? By the way, do I have to install the previous SP1-3 too or just SP4 ? Title: [REQ] Solidworks 2010 Toolbox (English, not Russian) Post by: solutions on July 26, 2011, 10:39:16 22:39 Does anyone have Toolbox for 2010?
There's a Russian one out there, but cannot find one in The Queen's English :-* thanks in advance, -solutions p.s. :o @ ALKA: read the rules dude...though content is appreciated, it's a no-no to redirect users to another site; another reason being that the site or blog can shut down and the post goes useless. Hopefully you'll see this msg (it's a reminder to others which is why not a PM) and can edit content links into your post before "they" see it Title: Re: SolidWorks 2010 all versions Post by: solutions on July 29, 2011, 09:35:30 21:35 Here's an untested x64 pill: http://d01.megashares.com/dl/DJWc9DS/solidworks 2010 sp0 crack 64.exe (http://d01.megashares.com/dl/DJWc9DS/solidworks 2010 sp0 crack 64.exe)
Valid links (untested); "x86" http://www.fileserve.com/file/DZPdHV9/SolidWorks.2010.SP0 http://www.fileserve.com/file/BFxcapF/SolidWorks.2010.SP0 http://www.fileserve.com/file/tpzqWgK/SolidWorks.2010.SP0 http://www.fileserve.com/file/w38ug3W/SolidWorks.2010.SP0 http://www.fileserve.com/file/jp2MgBN/SolidWorks.2010.SP0 http://www.fileserve.com/file/98s24TN/SolidWorks.2010.SP0 http://www.fileserve.com/file/fv6GFbM/SolidWorks.2010.SP0 http://www.fileserve.com/file/pHjY57Q/SolidWorks.2010.SP0 http://www.fileserve.com/file/gqdz7GK/SolidWorks.2010.SP0 http://www.fileserve.com/file/xvDQM2f/SolidWorks.2010.SP0 http://www.fileserve.com/file/MCnJ2cH/SolidWorks.2010.SP0 http://www.fileserve.com/file/CCXCdMb/SolidWorks.2010.SP0 http://www.fileserve.com/file/zYrRBP4/SolidWorks.2010.SP0 http://www.fileserve.com/file/Zpy6Bg5/SolidWorks.2010.SP0 http://www.fileserve.com/file/Tg9N7zY/SolidWorks.2010.SP0 http://www.fileserve.com/file/7u5wrnq/SolidWorks.2010.SP0 http://www.fileserve.com/file/BJeFbvG/SolidWorks.2010.SP0 http://www.fileserve.com/file/NnaG7sy/SolidWorks.2010.SP0 http://www.fileserve.com/file/6mqGsnq/SolidWorks.2010.SP0 http://www.fileserve.com/file/TVDwTqJ/SolidWorks.2010.SP0 http://www.fileserve.com/file/4tG2J8u/SolidWorks.2010.SP0 http://www.fileserve.com/file/2uHynY5/SolidWorks.2010.SP0 http://www.fileserve.com/file/xEXzpVS/SolidWorks.2010.SP0 http://www.fileserve.com/file/Esd6UsE/SolidWorks.2010.SP0 http://www.fileserve.com/file/Py9Fwnc/SolidWorks.2010.SP0 http://www.fileserve.com/file/QqEd6Xz/SolidWorks.2010.SP0 http://www.fileserve.com/file/sX3n36f/SolidWorks.2010.SP0 OR "64" http://www.fileserve.com/file/wbzZdt4/egyouth.com-Solidworks-2010-x64-by-AnGeL.part01.rar http://www.fileserve.com/file/gK8kZrJ/egyouth.com-Solidworks-2010-x64-by-AnGeL.part02.rar http://www.fileserve.com/file/spBpQ4g/egyouth.com-Solidworks-2010-x64-by-AnGeL.part03.rar http://www.fileserve.com/file/5bGuCmk/egyouth.com-Solidworks-2010-x64-by-AnGeL.part04.rar http://www.fileserve.com/file/UFQEemD/egyouth.com-Solidworks-2010-x64-by-AnGeL.part05.rar http://www.fileserve.com/file/CTTkssg/egyouth.com-Solidworks-2010-x64-by-AnGeL.part06.rar http://www.fileserve.com/file/25xpYAE/egyouth.com-Solidworks-2010-x64-by-AnGeL.part07.rar http://www.fileserve.com/file/hyzn29c/egyouth.com-Solidworks-2010-x64-by-AnGeL.part08.rar http://www.fileserve.com/file/F48Wx3w/egyouth.com-Solidworks-2010-x64-by-AnGeL.part09.rar http://www.fileserve.com/file/YSexYf7/egyouth.com-Solidworks-2010-x64-by-AnGeL.part10.rar http://www.fileserve.com/file/THDHzvA/egyouth.com-Solidworks-2010-x64-by-AnGeL.part11.rar http://www.fileserve.com/file/WnJUxgs/egyouth.com-Solidworks-2010-x64-by-AnGeL.part12.rar http://www.fileserve.com/file/gfx5W3Q/egyouth.com-Solidworks-2010-x64-by-AnGeL.part13.rar http://www.fileserve.com/file/6xP4X4v/egyouth.com-Solidworks-2010-x64-by-AnGeL.part14.rar http://www.fileserve.com/file/E5kDk3A/egyouth.com-Solidworks-2010-x64-by-AnGeL.part15.rar http://www.fileserve.com/file/5mnsD7m/egyouth.com-Solidworks-2010-x64-by-AnGeL.part16.rar http://www.fileserve.com/file/hNsk6A6/egyouth.com-Solidworks-2010-x64-by-AnGeL.part17.rar http://www.fileserve.com/file/kDcYn4V/egyouth.com-Solidworks-2010-x64-by-AnGeL.part18.rar http://www.fileserve.com/file/RS5jVFf/egyouth.com-Solidworks-2010-x64-by-AnGeL.part19.rar http://www.fileserve.com/file/ez5B2Kz/egyouth.com-Solidworks-2010-x64-by-AnGeL.part20.rar http://www.fileserve.com/file/3UtyZy4/egyouth.com-Solidworks-2010-x64-by-AnGeL.part21.rar http://www.fileserve.com/file/VEwE6x5/egyouth.com-Solidworks-2010-x64-by-AnGeL.part22.rar http://www.fileserve.com/file/RmkaJJg/egyouth.com-Solidworks-2010-x64-by-AnGeL.part23.rar http://www.fileserve.com/file/MRm4T9h/egyouth.com-Solidworks-2010-x64-by-AnGeL.part24.rar http://www.fileserve.com/file/vB3gfbD/egyouth.com-Solidworks-2010-x64-by-AnGeL.part25.rar Title: SolidWorks 2012 Post by: hosmis on October 04, 2011, 09:48:11 21:48 SolidWorks 2012 multilanguage 32+64...
http://www.multiupload.com/E1AGOBCB9V (http://img694.imageshack.us/img694/5040/0hld.jpg) (http://imageshack.us/photo/my-images/694/0hld.jpg/) Uploaded with ImageShack.us (http://imageshack.us) ----------- Edit : http://softarchive.net/blogs/training27/dss_solidworks_sp_multilanguage_x_x.829582.html (http://softarchive.net/blogs/training27/dss_solidworks_sp_multilanguage_x_x.829582.html) http://www.filejungle.com/f/6kdsRb (http://www.filejungle.com/f/6kdsRb) http://www.filejungle.com/f/89qrcb (http://www.filejungle.com/f/89qrcb) http://www.filejungle.com/f/EAUFFp (http://www.filejungle.com/f/EAUFFp) http://www.filejungle.com/f/zRbReH (http://www.filejungle.com/f/zRbReH) http://www.filejungle.com/f/ZVpc27 (http://www.filejungle.com/f/ZVpc27) http://www.filejungle.com/f/rz7dGJ (http://www.filejungle.com/f/rz7dGJ) http://www.filejungle.com/f/48GADJ (http://www.filejungle.com/f/48GADJ) http://www.filejungle.com/f/TSPwjm (http://www.filejungle.com/f/TSPwjm) http://www.filejungle.com/f/kdscvV (http://www.filejungle.com/f/kdscvV) http://www.filejungle.com/f/YxKZH5 (http://www.filejungle.com/f/YxKZH5) http://www.filejungle.com/f/2ZaezZ (http://www.filejungle.com/f/2ZaezZ) http://www.filejungle.com/f/angZWG (http://www.filejungle.com/f/angZWG) http://www.filejungle.com/f/2bAhCf (http://www.filejungle.com/f/2bAhCf) http://www.filejungle.com/f/cwNc9s (http://www.filejungle.com/f/cwNc9s) http://www.filejungle.com/f/qrzcuZ (http://www.filejungle.com/f/qrzcuZ) http://www.filejungle.com/f/SmA2aH (http://www.filejungle.com/f/SmA2aH) http://www.filejungle.com/f/HmZVqv (http://www.filejungle.com/f/HmZVqv) http://www.filejungle.com/f/n5cFte (http://www.filejungle.com/f/n5cFte) http://www.filejungle.com/f/hzhnJc (http://www.filejungle.com/f/hzhnJc) http://www.filejungle.com/f/GV8qUx (http://www.filejungle.com/f/GV8qUx) http://www.filejungle.com/f/zVy8Qz (http://www.filejungle.com/f/zVy8Qz) http://www.filejungle.com/f/nWTZXV (http://www.filejungle.com/f/nWTZXV) http://www.filejungle.com/f/ZgBWtm (http://www.filejungle.com/f/ZgBWtm) http://www.filejungle.com/f/fG8hz9 (http://www.filejungle.com/f/fG8hz9) http://www.filejungle.com/f/VQDQ3v (http://www.filejungle.com/f/VQDQ3v) http://www.filejungle.com/f/jtesPx (http://www.filejungle.com/f/jtesPx) http://www.filejungle.com/f/rWCf6A (http://www.filejungle.com/f/rWCf6A) http://www.filejungle.com/f/prp9zE (http://www.filejungle.com/f/prp9zE) http://www.filejungle.com/f/3yp8BG (http://www.filejungle.com/f/3yp8BG) http://www.filejungle.com/f/YQrBwd (http://www.filejungle.com/f/YQrBwd) http://www.filejungle.com/f/4TCEhQ (http://www.filejungle.com/f/4TCEhQ) http://www.filejungle.com/f/eAUsBf (http://www.filejungle.com/f/eAUsBf) http://www.filejungle.com/f/tDmMJU (http://www.filejungle.com/f/tDmMJU) http://www.filejungle.com/f/UTMkdc (http://www.filejungle.com/f/UTMkdc) http://www.filejungle.com/f/Jy5xJE (http://www.filejungle.com/f/Jy5xJE) http://www.filejungle.com/f/mvHSx4 (http://www.filejungle.com/f/mvHSx4) http://www.filejungle.com/f/eNsQEG (http://www.filejungle.com/f/eNsQEG) http://www.filejungle.com/f/kYRqAZ (http://www.filejungle.com/f/kYRqAZ) http://www.filejungle.com/f/32NakT (http://www.filejungle.com/f/32NakT) -------------------- SW2012 SP0.0 Setup & crack (by SSQ) Win32 https://www.rapidshare.com/files/3222899112/SW2012_SP0.0_Win32_Full_SSQ.part1.rar (https://www.rapidshare.com/files/3222899112/SW2012_SP0.0_Win32_Full_SSQ.part1.rar) https://www.rapidshare.com/files/4226339922/SW2012_SP0.0_Win32_Full_SSQ.part2.rar (https://www.rapidshare.com/files/4226339922/SW2012_SP0.0_Win32_Full_SSQ.part2.rar) https://www.rapidshare.com/files/3398083458/SW2012_SP0.0_Win32_Full_SSQ.part3.rar (https://www.rapidshare.com/files/3398083458/SW2012_SP0.0_Win32_Full_SSQ.part3.rar) https://www.rapidshare.com/files/4116369602/SW2012_SP0.0_Win32_Full_SSQ.part4.rar (https://www.rapidshare.com/files/4116369602/SW2012_SP0.0_Win32_Full_SSQ.part4.rar) https://www.rapidshare.com/files/1232790644/SW2012_SP0.0_Win32_Full_SSQ.part5.rar (https://www.rapidshare.com/files/1232790644/SW2012_SP0.0_Win32_Full_SSQ.part5.rar) https://www.rapidshare.com/files/1002727980/SW2012_SP0.0_Win32_Full_SSQ.part6.rar (https://www.rapidshare.com/files/1002727980/SW2012_SP0.0_Win32_Full_SSQ.part6.rar) https://www.rapidshare.com/files/4045893742/SW2012_SP0.0_Win32_Full_SSQ.part7.rar (https://www.rapidshare.com/files/4045893742/SW2012_SP0.0_Win32_Full_SSQ.part7.rar) https://www.rapidshare.com/files/3188411375/SW2012_SP0.0_Win32_Full_SSQ.part8.rar (https://www.rapidshare.com/files/3188411375/SW2012_SP0.0_Win32_Full_SSQ.part8.rar) Win64 https://www.rapidshare.com/files/764201970/SW2012_SP0.0_Win64_Full_SSQ.part01.rar (https://www.rapidshare.com/files/764201970/SW2012_SP0.0_Win64_Full_SSQ.part01.rar) https://www.rapidshare.com/files/2714660545/SW2012_SP0.0_Win64_Full_SSQ.part02.rar (https://www.rapidshare.com/files/2714660545/SW2012_SP0.0_Win64_Full_SSQ.part02.rar) https://www.rapidshare.com/files/1305642105/SW2012_SP0.0_Win64_Full_SSQ.part03.rar (https://www.rapidshare.com/files/1305642105/SW2012_SP0.0_Win64_Full_SSQ.part03.rar) https://www.rapidshare.com/files/1844661145/SW2012_SP0.0_Win64_Full_SSQ.part04.rar (https://www.rapidshare.com/files/1844661145/SW2012_SP0.0_Win64_Full_SSQ.part04.rar) https://www.rapidshare.com/files/3238372522/SW2012_SP0.0_Win64_Full_SSQ.part05.rar (https://www.rapidshare.com/files/3238372522/SW2012_SP0.0_Win64_Full_SSQ.part05.rar) https://www.rapidshare.com/files/213985271/SW2012_SP0.0_Win64_Full_SSQ.part06.rar (https://www.rapidshare.com/files/213985271/SW2012_SP0.0_Win64_Full_SSQ.part06.rar) https://www.rapidshare.com/files/4157054567/SW2012_SP0.0_Win64_Full_SSQ.part07.rar (https://www.rapidshare.com/files/4157054567/SW2012_SP0.0_Win64_Full_SSQ.part07.rar) https://www.rapidshare.com/files/3148534198/SW2012_SP0.0_Win64_Full_SSQ.part08.rar (https://www.rapidshare.com/files/3148534198/SW2012_SP0.0_Win64_Full_SSQ.part08.rar) Title: Re: SolidWorks 2012 Post by: hosmis on November 20, 2011, 05:42:02 05:42 SolidWorks 2012 SP1.0 multilanguage 32+64...
Torrent : http://www.multiupload.com/0QB5LJ2BRX Title: Re: SolidWorks 2012 Post by: hosmis on February 23, 2012, 11:24:39 23:24 SolidWorks 2012 SP2.0 Win32 & Win64 Multilanguage 13.13 GB
: DSS SW Corp. : 32bit+64bit Vista: Windows 7: : ( ) : SW2012 SP0.0-1.0 (SW2010-2012 Activator SSQ) : Windows XP 86/64, Windows Vista 86/64 (Vista Ultimate, Business and Enterprise editions only!), Win7 x86/x64 (Professional, Ultimate and Enterprise only!) : 13.13 GB : SolidWorks , CALS-, Windows- . : SolidWorks, SolidWorks Professional SolidWorks Premium. SolidWorks SolidWorks Corp. (), Dassault Systemes () . SolidWorks Corp. , , SolidWorks . SolidWorks . Windows, , , , . C . , " ?": 1. SW2012_SP2.0_Win32_Edition_Update - SW2012 SP1.0 Win32 Edition 2. SW2012_SP2.0_Win64_Edition_Update - SW2012 SP1.0 Win64 Edition 3. SW2012_Update_Manager_Manual_eng.pdf - SW ( , MSP ) COSMOSM- COSMOSM ( ) eDrawings - eDrawings ( ) eDrawings API SDK - eDrawings API SDK ( ) PDM Works server - SW PDMWorks ( ) SolidWorks\SolidWorks Core Update - SW ( SW add-in, SW Motion, SW Simulation SW PhotoView 360) SolidWorks\SolidWorks Localizations Update - ( SW2012!) SolidWorks API SDK - SW API SDK ( ) SolidWorks Document Manager - SW Document Manager ( ) SolidWorks Explorer - SW Explorer (..\Full Setup\swexplorer.exe - , - SW Explorer; ..\Updates Only\ - - SW Explorer) SolidWorks Flow Simulstion - SW Flow Simulation (..\Full Setup\flowsimulation.exe - , - SW Flow Simulation; ..\Updates Only\.. - - SW Flow Simulation) SolidWorks Help - SW Help , ( ) -i Win32, - Win64, - (Win32 & Win64) ( ZIP ) ----------- http://extabit.com/file/27au8siifztqc/SW2O12.SP2.0.part32.rar http://extabit.com/file/27au8siifztp0/SW2O12.SP2.0.part34.rar http://extabit.com/file/27au8siifd01w/SW2O12.SP2.0.part33.rar http://extabit.com/file/27au8siih91h0/SW2O12.SP2.0.part31.rar http://extabit.com/file/27au8simpjsjo/SW2O12.SP2.0.part30.rar http://extabit.com/file/27au8siifcqj8/SW2O12.SP2.0.part28.rar http://extabit.com/file/27au8siieqvo4/SW2O12.SP2.0.part27.rar http://extabit.com/file/27au8siiazrk4/SW2O12.SP2.0.part26.rar http://extabit.com/file/27au8siier1w4/SW2O12.SP2.0.part29.rar http://extabit.com/file/27au8siiblpqs/SW2O12.SP2.0.part25.rar http://extabit.com/file/27au8siic89zo/SW2O12.SP2.0.part24.rar http://extabit.com/file/27au8sidyades/SW2O12.SP2.0.part21.rar http://extabit.com/file/27au8sii8i7xg/SW2O12.SP2.0.part20.rar http://extabit.com/file/27au8sidvsh50/SW2O12.SP2.0.part18.rar http://extabit.com/file/27au8sie1eu10/SW2O12.SP2.0.part22.rar http://extabit.com/file/27au8sii8ikkk/SW2O12.SP2.0.part23.rar http://extabit.com/file/27au8sidyadf8/SW2O12.SP2.0.part19.rar http://extabit.com/file/27au8sidwf7qc/SW2O12.SP2.0.part17.rar http://extabit.com/file/27au8sidso0is/SW2O12.SP2.0.part16.rar http://extabit.com/file/27au8sidvt6b8/SW2O12.SP2.0.part15.rar http://extabit.com/file/27au8sidv69jo/SW2O12.SP2.0.part14.rar http://extabit.com/file/27au8sidtxxdg/SW2O12.SP2.0.part13.rar http://extabit.com/file/27au8si9jqcdw/SW2O12.SP2.0.part12.rar http://extabit.com/file/27au8sidx21ac/SW2O12.SP2.0.part10.rar http://extabit.com/file/27au8si9kd98k/SW2O12.SP2.0.part09.rar http://extabit.com/file/27au8si9kzal0/SW2O12.SP2.0.part08.rar http://extabit.com/file/27au8sidtxxis/SW2O12.SP2.0.part07.rar http://extabit.com/file/27au8sidv6vic/SW2O12.SP2.0.part11.rar http://extabit.com/file/27au8sidyaa9g/SW2O12.SP2.0.part07.rar http://extabit.com/file/27au8si9igs44/SW2O12.SP2.0.part06.rar http://extabit.com/file/27au8si9kyrn8/SW2O12.SP2.0.part05.rar http://extabit.com/file/27au8si9glso4/SW2O12.SP2.0.part04.rar http://extabit.com/file/27au8si9h8j9g/SW2O12.SP2.0.part02.rar http://extabit.com/file/27au8si9c969w/SW2O12.SP2.0.part01.rar http://extabit.com/file/27au8si9jq2yc/SW2O12.SP2.0.part03.rar -------------------------- http://ul.to/43dolobq/SW2O12.SP2.0.part01.rar http://ul.to/nkaxzv1a/SW2O12.SP2.0.part02.rar http://ul.to/h5veiban/SW2O12.SP2.0.part03.rar http://ul.to/j7uv78n4/SW2O12.SP2.0.part04.rar http://ul.to/kmhhk9ke/SW2O12.SP2.0.part05.rar http://ul.to/111kocu7/SW2O12.SP2.0.part06.rar http://ul.to/b4t8bji4/SW2O12.SP2.0.part07.rar http://ul.to/vrnpel1j/SW2O12.SP2.0.part08.rar http://ul.to/p22epso2/SW2O12.SP2.0.part09.rar http://ul.to/t6xn8usy/SW2O12.SP2.0.part10.rar http://ul.to/espyr983/SW2O12.SP2.0.part11.rar http://ul.to/rubo25tn/SW2O12.SP2.0.part12.rar http://ul.to/w9zu1vtq/SW2O12.SP2.0.part13.rar http://ul.to/l1saqvyb/SW2O12.SP2.0.part14.rar http://ul.to/vd0bg4on/SW2O12.SP2.0.part15.rar http://ul.to/ajayoqj3/SW2O12.SP2.0.part16.rar http://ul.to/9rdbput1/SW2O12.SP2.0.part17.rar http://ul.to/y562e2wk/SW2O12.SP2.0.part18.rar http://ul.to/blw04w1w/SW2O12.SP2.0.part19.rar http://ul.to/c4o7ueoa/SW2O12.SP2.0.part20.rar http://ul.to/8tverv90/SW2O12.SP2.0.part21.rar http://ul.to/caqdgamp/SW2O12.SP2.0.part22.rar http://ul.to/pxdaehqs/SW2O12.SP2.0.part23.rar http://ul.to/wk769euw/SW2O12.SP2.0.part24.rar http://ul.to/pbs1l647/SW2O12.SP2.0.part25.rar http://ul.to/9zu1vijy/SW2O12.SP2.0.part26.rar http://ul.to/hf7mrsfo/SW2O12.SP2.0.part27.rar http://ul.to/t7o40r9u/SW2O12.SP2.0.part28.rar http://ul.to/0ncclauu/SW2O12.SP2.0.part29.rar http://ul.to/mbm5vbe2/SW2O12.SP2.0.part30.rar http://ul.to/90d3agup/SW2O12.SP2.0.part31.rar http://ul.to/5g4k8i8w/SW2O12.SP2.0.part32.rar http://ul.to/bj6khejm/SW2O12.SP2.0.part33.rar http://ul.to/3z2y0kbe/SW2O12.SP2.0.part34.rar ------------------ http://letitbit.net/download/86011.8d90d731e558718f908dca8feb31/SW2O12.SP2.0.part01.rar.html http://letitbit.net/download/81096.86ed34117366cfc3197cef3f7777/SW2O12.SP2.0.part02.rar.html http://letitbit.net/download/01888.090c712dec956751a9da0a9cfa32/SW2O12.SP2.0.part03.rar.html http://letitbit.net/download/27155.2a0fb8be20bf2cf1ebbfee42263b/SW2O12.SP2.0.part04.rar.html http://letitbit.net/download/01137.0b0c7b18e0778a32692480115008/SW2O12.SP2.0.part05.rar.html http://letitbit.net/download/93126.92d13dbc6f0721a1b979ad03a801/SW2O12.SP2.0.part06.rar.html http://letitbit.net/download/95483.94e1bae0eab3cb3fea4b9cf6f5b3/SW2O12.SP2.0.part07.rar.html http://letitbit.net/download/36195.341dbd989103dd267061020839a6/SW2O12.SP2.0.part08.rar.html http://letitbit.net/download/35601.3cff5836c11da6a26fd6f24f189a/SW2O12.SP2.0.part09.rar.html http://letitbit.net/download/30509.367a652900af2924840b5b4a6c86/SW2O12.SP2.0.part10.rar.html http://letitbit.net/download/79880.7a60adfbdabe9a73498a45c721d8/SW2O12.SP2.0.part11.rar.html http://letitbit.net/download/79543.7b81952810f30ae45078394c4660/SW2O12.SP2.0.part12.rar.html http://letitbit.net/download/52317.55311a0aa807388b78ad2fc5c590/SW2O12.SP2.0.part13.rar.html http://letitbit.net/download/59156.5e2de68ea046406727918ea28fa0/SW2O12.SP2.0.part14.rar.html http://letitbit.net/download/34531.3f4d8e00866c2726a16aaa2eda81/SW2O12.SP2.0.part15.rar.html http://letitbit.net/download/83105.8f7907f808e3aec42dd214d0f564/SW2O12.SP2.0.part16.rar.html http://letitbit.net/download/29998.2036d275f4615647bb58bf9ee8ee/SW2O12.SP2.0.part17.rar.html http://letitbit.net/download/13942.19be2d3db6c1e266b3770cc324f2/SW2O12.SP2.0.part18.rar.html http://letitbit.net/download/21225.2cd3db77d1d46933b713eb377ad2/SW2O12.SP2.0.part19.rar.html http://letitbit.net/download/86741.8f8a1936c53d0cb5ff362cb6156f/SW2O12.SP2.0.part20.rar.html http://letitbit.net/download/66065.680408d9511f93e4dcb9c89f96de/SW2O12.SP2.0.part21.rar.html http://letitbit.net/download/91341.9781dfcbccc3ccaa553982077457/SW2O12.SP2.0.part22.rar.html http://letitbit.net/download/49366.410a6a71328a5cfe2e1c522fb93a/SW2O12.SP2.0.part23.rar.html http://letitbit.net/download/15425.1408ce58c9e245ddbffc7b93c6f8/SW2O12.SP2.0.part24.rar.html http://letitbit.net/download/50418.55404e1408d124d9f2493eac2e3a/SW2O12.SP2.0.part25.rar.html http://letitbit.net/download/11704.13557964c1f3fa01ac5d91bedc85/SW2O12.SP2.0.part26.rar.html http://letitbit.net/download/13930.18146c6cbb8d1ddbc2c6c0331485/SW2O12.SP2.0.part27.rar.html http://letitbit.net/download/15209.11e7c59a92a923debe4a06c8321d/SW2O12.SP2.0.part28.rar.html http://letitbit.net/download/20569.2aa4df2087284d38e6afdcaca9ed/SW2O12.SP2.0.part29.rar.html http://letitbit.net/download/36522.335fdecae4d53e3b30d800fd4a62/SW2O12.SP2.0.part30.rar.html http://letitbit.net/download/23576.217ab992bdd20cf1e1781f5ada2b/SW2O12.SP2.0.part31.rar.html http://letitbit.net/download/81662.8f619ed0fb4d98df939a3490fc26/SW2O12.SP2.0.part32.rar.html http://letitbit.net/download/13605.117c1c39ed894d732264a064ea5a/SW2O12.SP2.0.part33.rar.html http://letitbit.net/download/71273.7118558e5baf1c6df85a3827517b/SW2O12.SP2.0.part34.rar.html ------------------- http://turbobit.net/b5sg0ciudos3/SW2O12.SP2.0.part01.rar.html http://turbobit.net/m9wvgbh7v65d/SW2O12.SP2.0.part02.rar.html http://turbobit.net/mx17w122e8bm/SW2O12.SP2.0.part03.rar.html http://turbobit.net/kje1gkxve9g1/SW2O12.SP2.0.part04.rar.html http://turbobit.net/jmxi5453kn7m/SW2O12.SP2.0.part05.rar.html http://turbobit.net/muwgypisknp1/SW2O12.SP2.0.part06.rar.html http://turbobit.net/v4a4wjrfrz56/SW2O12.SP2.0.part07.rar.html http://turbobit.net/l7exfl6vurq8/SW2O12.SP2.0.part08.rar.html http://turbobit.net/5cv8u3xoc2nz/SW2O12.SP2.0.part09.rar.html http://turbobit.net/b70tad9gyp3a/SW2O12.SP2.0.part10.rar.html http://turbobit.net/zbnnnntsyz6s/SW2O12.SP2.0.part11.rar.html http://turbobit.net/3p6lmgymqud2/SW2O12.SP2.0.part12.rar.html http://turbobit.net/pnsswbmzsezm/SW2O12.SP2.0.part13.rar.html http://turbobit.net/zekq49c3bsye/SW2O12.SP2.0.part14.rar.html http://turbobit.net/8cqxefj5vvck/SW2O12.SP2.0.part15.rar.html http://turbobit.net/9j7vrhupja9l/SW2O12.SP2.0.part16.rar.html http://turbobit.net/q1tgvyjuu4zq/SW2O12.SP2.0.part17.rar.html http://turbobit.net/v108a6fltip0/SW2O12.SP2.0.part18.rar.html http://turbobit.net/9dcwerc1tiit/SW2O12.SP2.0.part19.rar.html http://turbobit.net/tzevu7pnviee/SW2O12.SP2.0.part20.rar.html http://turbobit.net/duga78quzd4m/SW2O12.SP2.0.part21.rar.html http://turbobit.net/6uummvrf3dt7/SW2O12.SP2.0.part22.rar.html http://turbobit.net/13c01xy5x3lr/SW2O12.SP2.0.part23.rar.html http://turbobit.net/mckl9d2roer7/SW2O12.SP2.0.part24.rar.html http://turbobit.net/b8ck44gzl1c9/SW2O12.SP2.0.part25.rar.html http://turbobit.net/wh7weno5wtgk/SW2O12.SP2.0.part26.rar.html http://turbobit.net/dr18ria2zmht/SW2O12.SP2.0.part27.rar.html http://turbobit.net/7xw3w02qgvt1/SW2O12.SP2.0.part28.rar.html http://turbobit.net/juz7gc7z3kr2/SW2O12.SP2.0.part29.rar.html http://turbobit.net/z2m1dxq7oyb7/SW2O12.SP2.0.part30.rar.html http://turbobit.net/2oejet94z14r/SW2O12.SP2.0.part31.rar.html http://turbobit.net/ka3s07kzagqx/SW2O12.SP2.0.part32.rar.html http://turbobit.net/lomkxu13x0sv/SW2O12.SP2.0.part33.rar.html http://turbobit.net/9qmnpft85gyc/SW2O12.SP2.0.part34.rar.html --------------- Torrent magnet... Title: Re: SolidWorks 2012 Post by: Elmer on March 14, 2012, 03:56:54 03:56 SP2.0 magnet still works fine, I did however have problems with multiupload.
For 64-bit SP0.0 SSQ; http://thepiratebay.se/torrent/7011307/SW2012_SP0.0_Win64_Full_Multilanguage_SSQ.iso Title: Re: SolidWorks 2012 Post by: chacacampeon on June 04, 2012, 10:57:46 22:57 Hi, I lost pdf to install sp2, can you upload, thanks.
Title: Re: SolidWorks 2012 Post by: CocaCola on June 08, 2012, 08:18:15 08:18 Hi, I lost pdf to install sp2, can you upload, thanks. Just the PDF Update Manual Title: Re: SolidWorks 2012 Post by: hosmis on June 08, 2012, 10:31:48 10:31 SW2012 SP3.0 Final 32/64bit update (by SSQ)
(only update !!! ) Magnet link : http://www.mediafire.com/?o89t4b98t77f7xk Torrent : http://www.mediafire.com/?qu56i0fqaxqtl3y Title: Re: SolidWorks - All Versions Post by: solutions on October 10, 2012, 04:06:28 04:06 Found SW 2013 SP0.0
x64 (6.27GB) https://filepost.com/files/f8586m91/SW2013_sp0_x64_Multilingual.part1.rar https://filepost.com/files/eab56meb/SW2013_sp0_x64_Multilingual.part2.rar https://filepost.com/files/974mf8b7/SW2013_sp0_x64_Multilingual.part3.rar https://filepost.com/files/a28me6a2/SW2013_sp0_x64_Multilingual.part4.rar https://filepost.com/files/38192amc/SW2013_sp0_x64_Multilingual.part5.rar https://filepost.com/files/7d6ca947/SW2013_sp0_x64_Multilingual.part6.rar https://filepost.com/files/15a4c47d/SW2013_sp0_x64_Multilingual.part7.rar x86 (5.79GB) https://filepost.com/files/d5cd9b25/SW2013_sp0_x86_Multilingual.part1.rar https://filepost.com/files/394f4e68/SW2013_sp0_x86_Multilingual.part2.rar https://filepost.com/files/648fffbm/SW2013_sp0_x86_Multilingual.part3.rar https://filepost.com/files/95eme132/SW2013_sp0_x86_Multilingual.part4.rar https://filepost.com/files/35141c9d/SW2013_sp0_x86_Multilingual.part5.rar https://filepost.com/files/183m9ed3/SW2013_sp0_x86_Multilingual.part6.rar Title: Re: SolidWorks - All Versions Post by: hosmis on October 10, 2012, 04:20:31 04:20 SW2013 SP0 torrent :
http://www.multiupload.nl/J2KBIW91XU Title: Re: SolidWorks - All Versions Post by: bobcat1 on October 13, 2012, 12:38:30 12:38 HI
Attention SW2013 will not run on XP machine only win 7 and up All the best Bobi Title: Re: SolidWorks - All Versions Post by: hosmis on October 20, 2012, 08:33:20 20:33 RealView realhack 3.0 :
https://www.rapidshare.com/files/1902215312/Solidworks_RealView_Hack.rar https://hotfile.com/dl/176823813/d4882e0/Solidworks_RealView_Hack.rar.html (http://imageshack.us/a/img20/7444/realhackafter.jpg) (http://imageshack.us/photo/my-images/20/realhackafter.jpg/) Uploaded with ImageShack.us (http://imageshack.us) Title: Re: SolidWorks - All Versions Post by: hosmis on December 06, 2012, 05:58:35 17:58 Solidworks 2013 sp1 - only update :
Torrent http://rapidshare.com/files/2172685172/Solidworks%202013%20SP1%20Update.rar ------ Edit : Solidworks 2013 sp0 setup Torrent : http://www.multiupload.nl/J2KBIW91XU rutracker : http://www.multiupload.nl/1EAGY6R2SA Title: Re: SolidWorks - All Versions Post by: Unhappy on December 06, 2012, 11:43:46 23:43 Solidworks 2013 sp1 - only update : File not found error, I think deleted by rapidshare kindly reuploadTorrent http://rapidshare.com/files/21726851...1%20Update.rar Title: Re: SolidWorks - All Versions Post by: hosmis on December 06, 2012, 11:55:41 23:55 Solidworkss 2013 SP1 Update
EDIT: links in Attachments last longer... - see link -------------- Edit : Solidworks 2013 sp0 setup Torrent : http://www.multiupload.nl/J2KBIW91XU rutracker : http://www.multiupload.nl/1EAGY6R2SA Title: Re: SolidWorks - All Versions Post by: solutions on December 07, 2012, 01:10:01 01:10 Can someone please u/l the 2013 update to a filehost when you get a chance? thanks!
Title: Re: Solidworks 2011/2013 ... 32 + 64 bit All Versions in one place .. Post by: hosmis on December 07, 2012, 10:22:42 10:22 SolidWorks Electrical 2013 SP1.0 x86+x64
Torrent http://rapidshare.com/files/2396710684/SolidWorks%20Electrical%202013%20SP1.0%20x86%2Bx64.rar Title: Re: Solidworks 2011/2013 ... 32 + 64 bit All Versions in one place .. Post by: hosmis on December 07, 2012, 02:29:41 14:29 SolidCAM 2012 SP3-HF2 32/64bit
Multilanguage Torrent http://rapidshare.com/files/1309357216/SolidCAM%202012%20SP3-HF2.rar Title: Re: Solidworks 2011/2013 ... 32 + 64 bit All Versions in one place .. Post by: cncbasher on December 28, 2012, 06:05:33 18:05 here you go
http://dl.dropbox.com/u/48903110/x42a.rar Title: Re: Solidworks 2011/2013 ... 32 + 64 bit All Versions in one place .. Post by: alichan on February 13, 2013, 08:49:01 20:49 SolidCAM 2012 SP3-HF2 32/64bit Multilanguage Torrent http://rapidshare.com/files/1309357216/SolidCAM%202012%20SP3-HF2.rar Permission denied by uploader... Posted on: February 13, 2013, 09:35:12 21:35 - Automerged I reviewd the posts in this threads and the most of the links aren't working. Anyway I could get: 2008 SP0 x86 (working serial and patch works SSQ, tested in XP) 2008 SP5 only updates (attached patch doesn't work, tested in XP) 2011 SP0 x86-x64 (working serial and patch SSQ, tested in XP) I'm trying to get 2012 (with the highest SP) just for testing. 2013 is not suitable because I use XP and still will use it for long time. If someone needs some of these I can upload. I prefer working with relatively old versions like 2008, but also collect some newer because they are hard to get later. If you have a working patch for the 2008 updates, I "need" them :D Title: Re: Solidworks 2011/2013 ... 32 + 64 bit All Versions in one place .. Post by: hosmis on February 13, 2013, 08:53:39 20:53 SolidCAM 2013 SP0 Multilanguage for SolidWorks 2011-2013 32-64bit
Torrent : http://rapidshare.com/files/735834366/SolidCAM%202013%20SP0%20Multilanguage%20for%20SolidWorks%202011-2013%2032-64bit.zip Title: Re: Solidworks 2011/2013 ... 32 + 64 bit All Versions in one place .. Post by: alichan on February 19, 2013, 10:23:22 22:23 Update 19-02-2013:
SolidWorks 2012 SP5.0 32b-64b Multilanguage ISO + activator Links file: http://depositfiles.com/files/zv9l9f46g (http://depositfiles.com/files/zv9l9f46g) password: sonsivri WARNING:These uploads aren't mine. I tested main files: the keygen is full of shit, DON'T USE. Anyway you don't need to use it because serials are supplied. Activator is safe. SolidWorks 2012 SP5.0 32b-64b Multilanguage ISO + activator Links file: http://depositfiles.com/files/uzrdd2puw (http://depositfiles.com/files/uzrdd2puw) password: sonsivri Video Course for Solidworks 2005-2008 (QUASAR) -yep, old but i like it :)- Torrent file: http://depositfiles.com/files/b6ree7szh (http://depositfiles.com/files/b6ree7szh) password: sonsivri Title: Re: Solidworks 2011/2013 ... 32 + 64 bit All Versions in one place .. Post by: optikon on February 20, 2013, 12:52:29 00:52 Can someone please u/l the 2013 update to a filehost when you get a chance? thanks! Found this on file hosts. Solidworks 2013 with SP2 See attached. . . Title: Re: Solidworks 2011/2013 ... 32 + 64 bit All Versions in one place .. Post by: Arcadian on February 27, 2013, 01:52:33 13:52 Hi,
I have free account at rapidshare but couldn't download the file due to error "Download not available Download permission denied by uploader. (0b67c2f5)". Does anyone know the solution? Sorry for the bothering. EDIT: like here they have an anti-leech button SolidCAM 2013 SP0 Multilanguage for SolidWorks 2011-2013 32-64bit Torrent : http://rapidshare.com/files/735834366/SolidCAM%202013%20SP0%20Multilanguage%20for%20SolidWorks%202011-2013%2032-64bit.zip Title: Re: Solidworks 2011/2013 ... 32 + 64 bit All Versions in one place .. Post by: hosmis on July 15, 2013, 09:36:21 21:36 Solidworks 2013 SP4 integrated ( thanks @soliduser ) :
32-64 torrent.. http://rapidshare.com/files/2922560799/swsp4.rar (http://img836.imageshack.us/img836/6092/iezg.png) (http://imageshack.us/photo/my-images/836/iezg.png/) Uploaded with ImageShack.us (http://imageshack.us) Title: Re: Solidworks 2011/2013 ... 32 + 64 bit All Versions in one place .. Post by: galaxy on July 23, 2013, 09:35:42 09:35 works,,, if you get warning message for serial number not in database, just ignore it and press NEXT
Thank you Title: Re: Solidworks 2011/2013 ... 32 + 64 bit All Versions in one place .. Post by: hosmis on July 23, 2013, 02:59:21 14:59 SolidCAM 2013 SP2 Multilanguage for SolidWorks 2011-2013 32/64bit torrent
http://rapidshare.com/files/2592224849/%5Brutracker.org%5D.t4490836.rar Title: Re: Solidworks 2011/2013 ... 32 + 64 bit All Versions in one place .. Post by: vit2 on September 20, 2013, 06:30:47 06:30 SolidCAM 2013 SP3 EN + CZ for SolidWorks 2011-2013 32/64bit
Not torrent! Enjoy it.... Vit2 Title: Re: Solidworks 2011/2013 ... 32 + 64 bit All Versions in one place .. Post by: hosmis on October 08, 2013, 02:31:59 02:31 Solidworks 2014 sp0 - multilanguage 32-64 - torrent :
http://rapidshare.com/share/03A0F287B62BFDDCAACB5F51DA86701E (http://img191.imageshack.us/img191/5954/2r36.png) (http://imageshack.us/photo/my-images/191/2r36.png/) Uploaded with ImageShack.us (http://imageshack.us) (http://img59.imageshack.us/img59/7217/fmhi.png) (http://imageshack.us/photo/my-images/59/fmhi.png/) Uploaded with ImageShack.us (http://imageshack.us) (http://img14.imageshack.us/img14/2391/5i9j.png) (http://imageshack.us/photo/my-images/14/5i9j.png/) Uploaded with ImageShack.us (http://imageshack.us) Title: Re: Solidworks 2011/2013 ... 32 + 64 bit All Versions in one place .. Post by: optikon on November 29, 2013, 04:57:21 16:57 Hi optikon . Can you please upload part 14, the file is not useble. Thanks. A couple of hosts are available, did you try each? I cannot confirm, but I doubt the file is corrupt in both locations. Also, this SW version is outdated already. v2014 SP1 is available and I suggest using a torrent for it as posted by Hosmis below. Title: Re: Solidworks 2011/2013 ... 32 + 64 bit All Versions in one place .. Post by: hosmis on November 29, 2013, 08:38:13 20:38 sp0 old :)
SW2014 sp1.0 : torrent http://rapidshare.com/share/3B96CCE75F7B31FAE0B0BAF28CE9F3F7 Title: Re: Solidworks 2011/2013 ... 32 + 64 bit All Versions in one place .. Post by: pickit2 on December 26, 2013, 08:56:55 20:56 SolidCam 2014 - 64bit see link
I have 32bit version, untested.. Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: sgoum on December 30, 2013, 02:45:23 14:45 Maybe he is using x64 windows and has problem with driver signature enforcement.
Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: sgoum on December 30, 2013, 09:09:53 21:09 Follow the steps in .txt after you enter win7 in "Disable Enforcement Unsigned drivers..."
Also solidcam to work you must every time to boot in that mode. Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: vit2 on January 09, 2014, 07:27:40 07:27 Hello,
Here you have a mirror SolidCAM 2014 SP0 Multilanguage for SolidWorks 2011-2014 (Win32/Win64) | 5.11 Gb Languages: Chinese Simplified, Chinese Traditional, Czech, Danish, Dutch, English, French, German, Hebrew, Hungarian, Italian, Japanese, Korean, Polish, Portuguese, Russian, Spanish, Turkish You installed the 64 bit version of SolidWorks settings tested to 2013 sp3. Crack functional. Note: Before you install, start the system off with digitally signed drivers F8 key at boot! I also recommend to install sw driverreadyplus, but after installation, before installing it did not want to work. Enjoy it ... VIT1 Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: pickit2 on January 09, 2014, 10:59:53 10:59 SolidWorks 2014sp1 64bit
The full SSquad release 7.7GB ISO. Password = sonsivri Note: System requirements : Windows 8 (Professional, Enterprise and Standard), Windows 7 (Enterprise, Ultimate, Professional, and Home Premium) For Windows 7 and Windows 8 : Intel Pentium 4 or AMD Athlon dual-core processor , 3 GHz or higher, the technology SSE2, for Windows XP: Pentium 4 or Athlon dual-core processor , 1.6 GHz or higher with SSE2 technology 2 GB of RAM ( 4 GB recommended ) 6.3 GB free disk space for installation 1280 x 1024 (1600 x 1050 or higher ) display with true colour Microsoft Internet Explorer 7.0 or later Web browser Microsoft Mouse -compliant pointing device . Windows 8 x64 - only for SW2014 64bit! (Windows XP is NOT supported !) Title: Solidworks - SolidCAM - CamWorks -HsmWorks 20xx/13/14 ... 32 + 64 bit Post by: jesse on January 20, 2014, 05:55:29 17:55 Well Fellas
Latest Release of HsmWorks Mods, if this doesn't belong here you know what to do. Saludos EDIT: Don not post open link here upload them in text file Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: hosmis on January 28, 2014, 11:31:35 23:31 SW2014 SP2.0 Full Multilang (by SSQ) 32/64
torrent file.. http://rapidshare.com/share/F549B654DFC53A356958553029FE0C94 Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: Wizpic on January 31, 2014, 07:46:48 07:46 hosmis the link says Contains no data. Edit this Share to add data. clicking the download button does nothing
IF it's a torrent file attach it here instead wizpic Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: hosmis on January 31, 2014, 07:52:06 07:52 edit :
Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: pickit2 on February 02, 2014, 11:48:34 11:48 Hi Hosmis Who said there was a rapidshare link, If there are other links use them, There are not file in a rapidshare link thanks Do Not Request File Host you want to use. Note: all direct Links are seen by anyone so are most likely taken down quickly. So if you want them to last, do not post in open forum. Title: HsmWorks Post by: jesse on February 10, 2014, 07:48:47 19:48 HsmWorks 36565 as of Feb 07 2014 Saludos Title: SW Plastics v5.0 2012 x86 x64 Post by: solutions on February 23, 2014, 01:38:41 01:38 SW Plastics v5.0 2012 x86 x64
Title: HsmWorks Post by: jesse on March 13, 2014, 06:01:56 06:01 HsmWorks 36916 as of 10/03/2014, only 32 bits.
Saludos Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: hosmis on April 15, 2014, 10:40:12 10:40 SW2014 SP3 torrent
Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: hosmis on April 16, 2014, 01:59:15 01:59 Solid Cam 20 14 s p 1 zorrent : :-X
Title: HsmWorks Post by: jesse on June 11, 2014, 04:27:54 16:27 Hi Fellas Lattest release of HsmWorks as of June 10 2014 Enjoy Saludos Title: HsmWorks Post by: jesse on June 23, 2014, 03:22:41 03:22 HsmWorks 37424 Saludos Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: hosmis on June 23, 2014, 10:30:35 22:30 Solid works 20 14 s p 4 zorrent 32&64
Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: hosmis on July 14, 2014, 03:50:36 15:50 Solidcam 2014 sp2
only English, Czech and German languages (http://i59.tinypic.com/2060mf8.jpg) Edit : All 17 languages are supported Chinese Simplified, Chinese Traditional, Czech, Danish, Dutch, English, French, German, Hebrew, Hungarian, Italian, Japanese, Korean, Polish, Portuguese, Russian, Spanish, Turkish second text Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: hosmis on July 26, 2014, 11:20:21 23:20 https://www.google.com.tr/search?q=windows+driver+signature+disable&rls=com.microsoft:tr-TR:IE-SearchBox&ie=UTF-8&oe=UTF-8&sourceid=ie7&rlz=1I7GGHP_trTR588&gfe_rd=cr&ei=hS3UU_3ZDKSG8QfClIC4Bg&gws_rd=ssl
http://solidsquad.blogspot.com.tr/2013/10/solidcam-2014-sp0-multilanguage-for.html include , readme_64bit txt Code: 1. SolidCAM 2014 SP2 64bit Setup Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: hosmis on July 27, 2014, 01:29:58 01:29 http://www.solidworks.com/beta/about-beta.htm
http://www.solidworks.com/beta/beta-downloads.htm Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: Denimdragon on July 28, 2014, 02:25:53 02:25 I keep getting error -3,7 What am I doing wrong? Should I install the emu first? I've been fighting these for a couple of days now :'(
Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: pickit2 on July 28, 2014, 11:22:42 11:22 I keep getting error -3,7 What am I doing wrong? Should I install the emu first? I've been fighting these for a couple of days now :'( way too much information, to give an answer...(jk) I and other just ignore such requests.to help you help us. Are you keeping it a secret as to what version or who's post you downloaded from?. (no clue from thank you buttons pressed) If by chance you downloaded via links from hosmis, he went the extra... to post an how to at #108... Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: Denimdragon on July 28, 2014, 01:55:14 13:55 way too much information, to give an answer...(jk) I and other just ignore such requests. to help you help us. Are you keeping it a secret as to what version or who's post you downloaded from?. (no clue from thank you buttons pressed) If by chance you downloaded via links from hosmis, he went the extra... to post an how to at #108... Yeah sorry about that. It's SolidCAM_2014_S1_SSQ (disk image file). I'm on windows 8.1 with allow unsigned drivers enforced. Maybe I'm not understanding the process in the readme text (which is the same as what hosmis has posted above in #108) on how to move the files around. When it says "Unpack all folder from your localization archive to <SolidCAM 2013 progdir> (by default C:\Program Files\SolidCAM2014\) and overwrite original ones" It's possible that I'm doing that wrong because I don't see original language files to overwrite. Also I never see the hasp keys installed on my device manager. I feel like such a noob. I use to be a wiz at this but not anymore I guess :( Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: pickit2 on July 28, 2014, 02:47:29 14:47 Yeah sorry about that. It's SolidCAM_2014_S1_SSQ (disk image file). I'm on windows 8.1 with allow unsigned drivers enforced. Maybe I'm not understanding the process in the readme text (which is the same as what hosmis has posted above in #108) on how to move the files around. by default C:\Program Files\SolidCAM2014\ if you install to any other than default path, as with most programs, patches and cracks don't work, or are a pain to fix, so always install to default folders. When it says "Unpack all folder from your localization archive to <SolidCAM 2013 progdir> (by default C:\Program Files\SolidCAM2014\) and overwrite original ones" It's possible that I'm doing that wrong because I don't see original language files to overwrite. Also I never see the hasp keys installed on my device manager. I feel like such a noob. I use to be a wiz at this but not anymore I guess :( just like the pass word to a laptop was by word of mouth GreatGrandDaughter only problem was the person who put in the password could not spell. Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: Denimdragon on July 30, 2014, 12:06:23 00:06 by default C:\Program Files\SolidCAM2014\ if you install to any other than default path, as with most programs, patches and cracks don't work, or are a pain to fix, so always install to default folders. just like the pass word to a laptop was by word of mouth GreatGrandDaughter only problem was the person who put in the password could not spell. Working great now thanks for the help! Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: houly on September 17, 2014, 09:42:55 09:42 Hello all,
I'm trying to install SolidWorks 2014 SP4 but I always hav an error with Electrical schematic package, here is the screenshot : (http://image-shark.swigtbox.com/di-GNCK.png) could you please help me ? regards PS : I'm using Win7 / 64bits. Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: optikon on September 17, 2014, 10:37:11 10:37 Houly, look at this and see if it applies to you.
http://community.flexerasoftware.com/archive/index.php?t-178364.html Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: houly on September 17, 2014, 10:52:10 10:52 Thanks Optikon but I can't find the file .ldf, .mdf and I don't know how to create a base... any other solution ?
Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: pickit2 on September 17, 2014, 11:35:46 11:35 What is your install path?
try default path Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: houly on September 17, 2014, 04:18:46 16:18 Hello pickit2,
Thanks for your reply, I already use the default install path. I finally found .ldf and .mdf files and deleted all files of SQL... and it seems to work properly ! Thanks again Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: hosmis on October 14, 2014, 03:14:12 03:14 SolidWorks 2015 SP0 Full Multilang (by SSQ)
Only 64-bit Win 7/8/8.1 are supported! torrent file.. Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: hosmis on October 29, 2014, 02:12:51 02:12 Solidcam2014sp3
Multilang 32-64 torrent Title: HsmWorks Post by: jesse on October 30, 2014, 06:40:05 06:40 Hi Fellas long time no see ya HsmWorks 2015 Release 38078 from October 29 2014 (Fresh out of the oven) Saludos Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: green2red on November 28, 2014, 07:00:28 19:00 InfiniteSkills - SolidWorks Electrical - Schematic Fundamentals Training Video
A Practical SolidWorks Training Course That Teaches Real World Skills Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: George on December 01, 2014, 01:58:10 01:58 Jesse, any news on an updated crack that works properly for newer versions of HsmWorks?
Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: Bamsalt on February 09, 2015, 08:52:25 20:52 SolidCAM 2015 SP1 - 64bits Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: Bamsalt on February 21, 2015, 02:49:01 02:49 SolidWorks 2015 SP2 x64 Title: HsmWorks 38604 Post by: jesse on March 01, 2015, 07:19:10 19:19 Lattest release as of March 01 2015 Jesse, any news on an updated crack that works properly for newer versions of HsmWorks? Activation is the same is working ok until now, install as usual, offline, then activate, and block acces to the net. Saludos Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: George on March 01, 2015, 09:30:33 21:30 Re activation - the main program works, but Posting terminates with activation related errors.
Cheers, thanks for the new build! Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: Bamsalt on March 20, 2015, 08:13:00 08:13 1. SolidWorks 2015 SP2.1 Full - SSQ
2. CAMWorks 2015 SP1.0 x64 - SSQ ********** Issue corrected, the new file is SW15SP2_1.rar Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: UncleBog on March 20, 2015, 11:25:37 11:25 Hello Bamsalt,
Both of your attachments contain the same torrent (CAMWorks). Could you correct the SolidWorks file please ? Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: Bamsalt on April 03, 2015, 11:41:56 11:41 File updated .... Posted on: March 20, 2015, 01:32:51 13:32 - Automerged SolidCAM 2015 SP2 - 64bits Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: biko4710 on April 09, 2015, 02:57:27 02:57 SolidCAM 2015 SP2 - 64bits This is only an update to SP2, not full. Quote from: solidworks.com SOLIDWORKS 2015 SP2.1 products fix SPR 862458 (Save operation may not save complete files, which may result in file corruption.). This problem is specific to SOLIDWORKS 2015 products. The random problem may occur when saving in SOLIDWORKS CAD or when saving a file in an application that uses the SOLIDWORKS Document Manager such as, but not limited to, SOLIDWORKS Enterprise PDM, SOLIDWORKS Workgroup PDM, and SOLIDWORKS Pack and Go. Customers currently using any 2015 Service Pack older than SP2.1 should upgrade to SP2.1. SP2.1 torrent is at #124 ! Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: circuit77 on April 13, 2015, 01:34:35 01:34 Hi Jesse, are you referring to the activator from your 2014 June 23 post (http://www.sonsivri.to/forum/index.php?topic=25408.msg163249#msg163249)? This latest link only has the official exe, and the original activator link is offline --- any chance you can repost the activator? I'd be happy to mill you some aluminum gratitude = )
Lattest release as of March 01 2015 Activation is the same is working ok until now, install as usual, offline, then activate, and block acces to the net. Saludos Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: Bamsalt on May 03, 2015, 04:20:23 04:20 SolidCAM 2015 SP2 HF3 is already out. I made a search in the net, there are lots of link out there .....
If you do encounter problem, just make a request ... Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: hosmis on May 03, 2015, 07:09:03 07:09 SolidCAM 2015 SP2 HF3
Multilanguage 32/64 torrent Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: Bamsalt on May 05, 2015, 12:28:28 12:28 SP1.1 update for "CAMWorks 2015 for Solidworks".
CAMWorks 2015 SP1.1 Win64 - SSQ Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: Bamsalt on May 07, 2015, 10:17:54 22:17 SolidWorks 2015 SP3.0 Full Multilanguage Integrated - Torrent Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: pickit2 on May 10, 2015, 10:09:03 22:09 SolidWorks 2015 SP3.0
uploaded.net ul.to link Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: Bamsalt on June 06, 2015, 08:39:46 08:39 SolidCAM 2015 SP2 HF4 Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: houly on June 30, 2015, 04:01:11 16:01 Hello all,
Does someone could upload lasted version of Solidworks ? last links seem to be dead... thank you Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: hosmis on June 30, 2015, 04:15:52 16:15 sw2015 sp3 torrent :
Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: Bamsalt on July 01, 2015, 06:50:26 06:50 You can get your Solidworks 2015 SP4 here .... Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: houly on July 01, 2015, 10:28:58 10:28 Hello Bamsalt, I can't unrar your file, does it contain a password ?
Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: Bamsalt on July 01, 2015, 10:38:10 10:38 Yes, just use the standard password .... Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: hosmis on July 01, 2015, 03:31:02 15:31 sw2015sp4 torrent
Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: Bamsalt on July 25, 2015, 07:24:05 07:24 SolidCam 2015 SP3 x86 x64 is right below ... Title: HsmWorks Post by: jesse on September 04, 2015, 07:01:40 07:01 Hi Fellas Last Build of HsmWorks from August 28 2015, somebody asked for the activator so............... Saludos Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: kreutz on September 07, 2015, 04:26:53 16:26 SOLID WORKS software problems due to conflict with Microsoft update # KB3072630
There is a conflict with Microsoft KB3072630 (published July 14 2015) which can cause SOLIDWORKS to become unstable when installed or updated after KB3072630 is applied. The MS update makes changes to Windows Installer which prevents SolidWorks installations (new, modify/repair, update or uninstall) from being executed correctly. Solidworks' staff is trying to produce a software fix as soon as possible in 2015 and 2016 versions, however, in the interim, please review the information on the link below to prevent and correct instability caused by this conflict. Affected software SOLIDWORKS 2011 - 2015, and SOLIDWORKS 2016 beta. Symptoms Instability may appear in many different functional areas of the software, so the list below may not be complete. Known symptoms are: Missing add-ins from the SOLIDWORKS add-ins list in the Tools menu. Error when launching SOLIDWORKS or opening a file: "Could not load SOLIDWORKS DLL: GdtAnalysisSupport.dll". Crashes when recording, playing or editing a SOLIDWORKS Macro. Instability when using Equations. Error when launching SOLIDWORKS or SOLIDWORKS Explorer: "DWG document manager library is invalid or missing". More information and temporary solutions on: https://www.solidsolutions.co.uk/Blog/2015/07/Alert-Windows-Update-Causing-Issues-with-SOLIDWORKS-InstallsUpgrades/#.Vc8cGUa4EcM Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: hosmis on October 06, 2015, 02:27:05 14:27 sw2016 multi lang torrent
Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: optikon on December 12, 2015, 02:40:40 14:40 Solidworks 2016 with SP1 (integrated)
Release notes http://files.solidworks.com/Supportfiles/Release_Notes/2016/English/relnotes.htm Ru-tracker Torrent See attached . . . Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: bigtoy on January 28, 2016, 05:38:50 05:38 Do Solidworks KeyGens actually work?
We have SW at my work so I can copy the install files, no problem. Of course at work we use a license server - I can't copy that! So for home use, what "medicines" do I need to apply to crack SW so it'll work? On the internet I've seen SW keygens mentioned; is that's what's used here? I'm loath to download a multi-gigabyte torrent file just to answer the question, I hope you understand :D Hence the questions. Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: pickit2 on January 28, 2016, 09:02:19 09:02 you maybe lucky and get a licence file and patched files, only problem trying to save a large download is,
If the patch & licence files don't match your version it may not get fix... It happens so many times someone has fix files and says download from developers site, then developer changes the install file, and the fix no longer works. Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: optikon on January 28, 2016, 10:57:01 10:57 Do Solidworks KeyGens actually work? We have SW at my work so I can copy the install files, no problem. Of course at work we use a license server - I can't copy that! So for home use, what "medicines" do I need to apply to crack SW so it'll work? On the internet I've seen SW keygens mentioned; is that's what's used here? I'm loath to download a multi-gigabyte torrent file just to answer the question, I hope you understand :D Hence the questions. You want the fixes by SSQ, they are clean and flawless. I would stay away from anything else. which version do you have? perhaps we could post just the SSQ fix for what you need. Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: bigtoy on January 29, 2016, 04:20:30 04:20 We use SW 2016, I believe with the service pack (SP1). However we also use 2015. Either is fine by me, if fixes are available for either of them.
Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: pickit2 on January 29, 2016, 02:21:08 14:21 We use SW 2016, I believe with the service pack (SP1). However we also use 2015. Either is fine by me, if fixes are available for either of them. download the torrent and select from the list of files just the fix.. or just mark the two *.iso as don't down load...Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: optikon on January 29, 2016, 10:58:46 22:58 SolidWorks 2010 through 2016
** Fix only ** For anybody who already has setup files. Selective download of torrent files also possible (as Pickit2 pointed out) Link to Torrent for 2016 SP1 also included. Follow included instructions (readme) See attached . . . Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: Unhappy on March 28, 2016, 05:11:53 05:11 SolidWorks 2010 through 2016 links not working ** Fix only ** For anybody who already has setup files. Selective download of torrent files also possible (as Pickit2 pointed out) Link to Torrent for 2016 SP1 also included. Follow included instructions (readme) See attached . . . Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: SB7 on March 28, 2016, 11:12:09 23:12 Well the links were posted way back in January... not surprising they are off line
So here's a new link for SW2016 SP2 ( torrent with fix)... Password .. in file Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: hosmis on March 29, 2016, 02:10:49 02:10 ..or wait..because .. ::)
SW2016 SP3.0 EV (testing version) is released by DS SP3.0 Final will be available at last April (http://i68.tinypic.com/t84w2q.jpg) Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: hosmis on May 06, 2016, 04:27:26 16:27 and dont wait
SW2016 SP3.0 Full (by SSQ) torrent file.. Posted on: April 15, 2016, 04:14:09 04:14 - Automerged SolidCam 2016 sp0 torrent Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: hosmis on December 07, 2016, 03:46:16 15:46 SW2017 SP0 Premium Multilang Win64 (by SSQ)
torrent file.. Posted on: October 19, 2016, 07:31:43 07:31 - Automerged solidworks 2017 sp1 and solidcam 2016 sp 2 hf 3 torrent.. Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: pickit2 on December 10, 2016, 04:15:21 16:15 Could someone provide Solidworks 2017 SP1 MEDICINE ONLY please? The Links are to Torrent Files so just select the Medicine files. Nice to see you kept your SolidWorks files to your self... Not for the First Time I see http://www.sonsivri.to/forum/index.php?topic=34442.msg119644#msg119644 Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: hosmis on December 11, 2016, 01:42:37 01:42 okokokokok
Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: solutions on December 24, 2016, 10:33:16 10:33 ^ Is that version medicated by Solid Squad?
Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: CocaCola on December 24, 2016, 12:59:28 12:59 ^ Is that version medicated by Solid Squad? Yes, the activator says it's from SolidSQUAD Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: hosmis on February 15, 2017, 10:00:20 10:00 SolidWorks 2017 SP2 Full Premium Multilang
torrent file..12gb https://1drv.ms/u/s!As0jBHIyxz61h0PQ1hvDIx0fNt1J Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: Gallymimu on May 06, 2017, 11:49:22 23:49 My friend got a cease and desist and demand letter from solidworks lawyers. They said they would "settle" if the company buys solidworks premium, all plugins, and 1yr maintenance for each instance of infringement.
The EULA says they have the right to take identifying information from your network and send it back to solidworks (scary). I would guess they target small companies they can extort rather than individuals. Obviously this can be avoided if solidworks IPs and domains are known and blocked in the firewall and hosts files. Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: optikon on May 07, 2017, 12:29:03 12:29 My friend got a cease and desist and demand letter from solidworks lawyers. They said they would "settle" if the company buys solidworks premium, all plugins, and 1yr maintenance for each instance of infringement. The EULA says they have the right to take identifying information from your network and send it back to solidworks (scary). I would guess they target small companies they can extort rather than individuals. Obviously this can be avoided if solidworks IPs and domains are known and blocked in the firewall and hosts files. Whoa.. so whos got a list of hosts to block? Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: b555b on May 07, 2017, 01:38:29 13:38 Whoa.. so whos got a list of hosts to block? No need for a hosts list. Simply block all outgoing accesses for the Solidworks application in your firewall, so it will not be able to "call home". As you should do for every program that you use in an "unofficial" way.Edit: By the way, I just checked right now the log of my firewall and I see that it blocked Solidworks from reaching around 10 different servers today while I was using it, all with very different addresses. So it is definitively much easier to block all accesses in the firewall for Solidworks, than trying to guess all the addresses to block. Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: SB7 on May 08, 2017, 04:23:41 04:23 Blocking SW at the firewall is a good start, but what if SW are using codearmor ( or similar) ? While I have found precious little info on codearmor, it does appear to be able to phone home whenever it gets a chance and not necessarily using anything to do with the main app its self. ( perhaps using an approved process like svchost or IE etc) So blocking SW would do little if were protected with it.
The only safe way would be to use it on a system with no identifiable info and no network connections at all ... or at least behind a VPN ( although it would only take one mistake and the info is out) Not fear mongering, just food for thought. IS SW protected with Codearmor ? don't know , but you never know, they might have written their own protection module , ala Nuhertz) Of course it goes without saying that using any of this stuff on a company network is just plain stupid. JMHO Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: Gallymimu on May 09, 2017, 05:33:14 17:33 Yeah they were stupid but people get careless. What's scary is it doesn't appear that solidworks contacted the ISP i.e. they got enough info from the phone home to dig up the details. Pretty crummy of solidworks to immediately send the info on to the lawyers to try and terrify people. I suppose the approach is up to their discretion.
someone must have done some analysis and determined what they are using whether it be the main app, a peripheral app or an existing windows service. It would also be nice to know WHAT information they are stealing from people's networks. If it were me I'd want a list of hosts to block AND stopping the exe's explicitly. Posted on: May 09, 2017, 06:58:11 06:58 - Automerged They use Codearmor. Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: Git on May 10, 2017, 11:05:22 11:05 If you are worried about a program phoning home, stopping ethernet is a sure way to defeat it. Change "Ethernet1" to whatever your active Ethernet port is called and save this line to a text file and rename it LAN_OFF.bat : Code: netsh interface set interface "Ethernet1" disable Change "Ethernet1" to whatever your active Ethernet port is called and save this line to a text file and rename it LAN_ON.bat : Code: netsh interface set interface "Ethernet1" enable Double click or run LAN_OFF.bat to turn off networking and wait a few seconds. Open protected program. Use for as long as you like. Close protected program and wait a few seconds. Double click or run LAN_ON.bat to turn networking back on. Or you could write a batch file to turn off ethernet then start the program instead of its using its normal icon. Give the bat file an icon and use that instead : Code: netsh interface set interface "Ethernet1" disable Git Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: h0nk on May 10, 2017, 02:02:47 14:02 A not so disruptive method would be the manipulation of the routing table.
If "1.0.0.1" is your local gateway to the internet, then: Code:
would disable the internet access, and: Code:
But you have to use static IP-Addresses. Best Regards Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: optikon on May 11, 2017, 01:22:32 01:22 Guys, obviously having no internet / ethernet connection solves it. But not being online while using the SW tools is a huge pain isnt it?
What we seek is a way to keep internet available while stopping the SW rogue programs / methods from phoning home. I'm surprised SSQ hasn't addressed this issue in the main patching. Anyhow, I recall a way to stop SW from calling home from some time ago, I will see if I can dig it up. There are also programs like little snitch / wireshark that can identify the networks processes are trying to access - maybe a way to start a list. BTW, since somebody mentioned IE running via codearmor or some such, cant IE just be disabled? I dont use it as my browser so Im happy to nuke that POS if there is a way. Thanks Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: Gallymimu on May 11, 2017, 05:47:44 05:47 Guys, obviously having no internet / ethernet connection solves it. But not being online while using the SW tools is a huge pain isnt it? What we seek is a way to keep internet available while stopping the SW rogue programs / methods from phoning home. I'm surprised SSQ hasn't addressed this issue in the main patching. Anyhow, I recall a way to stop SW from calling home from some time ago, I will see if I can dig it up. There are also programs like little snitch / wireshark that can identify the networks processes are trying to access - maybe a way to start a list. BTW, since somebody mentioned IE running via codearmor or some such, cant IE just be disabled? I dont use it as my browser so Im happy to nuke that POS if there is a way. Thanks Agreed, turning off internet is kindof "well yeah duh" Like when you call tech support and they say "reinstall windows, and buy a new computer while you are at it" Gee thanks! If codearmor is becoming prominent you'd expect to see groups specifically researching and addressing it just like flexlm and other popular widely propagated protections. Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: avrtopic on June 25, 2017, 04:11:19 16:11 This may be helpful:
https://sites.google.com/site/mytools4000/home/allow-block-multiple-programs-through-windows-7-firewall/ Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: dikris on June 25, 2017, 05:38:16 17:38 disabling internet while working with SW s not too safe because codewarrior calls home shortly after the internet is restored (regardless if SW is running or not at that time).
Running SW on VM with "host only networking" is maybe safer though one loses a bit of the performance, but with today's powerful PCs it is not such a big deal. No SW online tools in such case obviously. Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: optikon on June 25, 2017, 10:43:25 22:43 disabling internet while working with SW s not too safe because codewarrior calls home shortly after the internet is restored (regardless if SW is running or not at that time). Running SW on VM with "host only networking" is maybe safer though one loses a bit of the performance, but with today's powerful PCs it is not such a big deal. No SW online tools in such case obviously. But surely codewarrior uses some process to call home? Some executable has to be running for it to do this so whats the process? Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: Gallymimu on June 25, 2017, 11:24:44 23:24 But surely codewarrior uses some process to call home? Some executable has to be running for it to do this so whats the process? haha, it's called codearmor. I haven't found any info on where it hides. Certainly it has to be executing a process to call home, but if they were smart they'd mask it under standard windows services. I've not seen any detailed research on codearmor. Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: vit2 on August 07, 2017, 09:42:18 21:42 Hello,
Asking for help with the launch of a solidcam. I installed the solidworks 2016 SP5 that goes without problems. Then I installed the solidcam first 2016 sp0 then sp1 and finally 2017 SP1 hf1 unfortunately not one version. I do not know where the problem is, run as administrator - install.cmd, and then the USB controllers appeared in the driver panels two new drivers (sentinel Hasp key driver version 7.54.0.0 and sentinel USB key 7.54.0.0) as always when I had previous versions installed . Does it drive you to anyone without any problems? Can anyone advise me what I'm doing wrong versus previous versions? Excuse me for my English. Thanks to Paul Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: hosmis on March 07, 2018, 01:55:52 01:55 Solidworks 2018 SP1 ... now include cam
https://www.youtube.com/watch?v=uLmr5WWuiJk torrent .. Posted on: February 11, 2018, 02:48:07 14:48 - Automerged ..sp2.. torrent 14GB Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: dikris on October 23, 2018, 03:52:57 15:52 what is happening with sw2019 and SSQ?
Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: hosmis on October 23, 2018, 09:02:23 21:02 Quote "...the SSQ group will no longer make cracks for any ds systems product. This was said by soliduser on a topic these past days. I hope and it's not true, and only that day soliduser was angry. but since several days have already passed, I suspect that it may be true. there will be no more cracks for ds sytems... " but.. SW2019 sp0 on a VMWare image ..12gb torrent Posted on: October 23, 2018, 12:02:24 12:02 - Automerged no free 30 day time stop Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: optikon on October 24, 2018, 12:12:24 00:12 what is happening with sw2019 and SSQ? it's TRUE SSQ has decided to stop releasing fixes for SW and perhaps all Dassault software.. I think its too much work / time for them. I'm guessing somebody else will at least take over for SW since its so popular. Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: hosmis on October 09, 2019, 02:28:55 14:28 ....end
sw19sp0 ssq.. torrent 14.3 gb Posted on: November 16, 2018, 03:37:13 15:37 - Automerged sw2019 sp1.0 13.9 gb torrent . . --------------------------------------------------------------- sw19 sp3 ssq 14 gb torrent ... Posted on: January 10, 2019, 12:49:58 00:49 - Automerged 2019sp4.0 torrent 13.9gb Posted on: August 29, 2019, 01:32:29 01:32 - Automerged SW2020 sp0 15.1 gb torrent Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: forter on October 09, 2019, 05:57:50 17:57 hosmis!
Is it multilanguage version? Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: hosmis on October 09, 2019, 06:19:15 18:19 they are all multilingual
Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: pki on May 21, 2020, 07:43:55 07:43 Hi. 2020 sp0 seems very buggy, any updates for later SP?
Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: hosmis on April 06, 2021, 12:35:38 00:35 sp3.0 15.3 gb torrent
Posted on: May 21, 2020, 09:21:31 09:21 - Automerged sw2020.sp4.0 torrent and catia2018 Posted on: August 08, 2020, 02:52:35 02:52 - Automerged cat2018withtorrent ( please combine reply ? )... thank you Edit : cat2018 sp6 torrent Posted on: August 12, 2020, 07:05:23 19:05 - Automerged SW2021SP0.0Premium realview2021 Posted on: October 12, 2020, 09:46:48 21:46 - Automerged sw2021 sp3 Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: CHJAY on June 30, 2021, 03:19:59 15:19 SolidWorks 2021 SP4.1 Full Premium Multilanguage x64
Year / Date of Release : 2021 Version : 2021 SP 4.1 Developer : DS SW Corporation Developer site : www.solidworks.com/ Bit depth : 64bit Interface language : Multilingual crack : Present System requirements : Windows 10 x64 only torrent 15.54GB Title: Re: Solidworks - SolidCAM - CamWorks - 20xx/13/14 ... 32 + 64 bit All Versions Post by: weshelk on February 22, 2022, 11:12:22 11:12 Some notes to people that want to get used SW installed in a VM, using VMware workstation 16 on Windows 10 and setting accelerated 3D graphics on the VM, using 2GB for graphics. I followed the instructions I found on the internet in this article....
How to Enable Hardware GL and RealView in Solidworks on a Virtual Machine for a MacBook Pro (2021 update, Intel Macs only. M1 is uncharted territory.) Josh Buesseler Well, well. After six interminable years Apple finally released a successor to the MacTube made out of 100% pure-grade unaffordium. I know you wanted those mind-blowing specs, but it’s out of your budget and anyway Solidworks is single-threaded so you’re fooling yourself if you think you need a jetpack to go to the hardware store. I know you wanna look great getting there, but you. don’t. need. it. You don’t! Maybe they’ll make a Pro for the Rest of Us someday, but until then: You got a 16" MacBook Pro! Congratulations! 64GB of RAM is nothing to sneer at, and the hardware horsepower will cut minutes off your rendering times. Plus it has a hardware ESC key, just like olden times. Wowie wow! Once you get your VM installed, the first thing that’s gonna blow your mind is that you can copy the VM image (well, in Fusion at least) from your old machine straight over and you won’t even have to reauthorize Windows or Solidworks. Even more surprising is that, you’ve already hacked the registry on your old machine, against all good reason Fusion will believe your graphics hardware hasn’t changed on the new one, but it’s…crashy. So you’re going to want to fix your registry settings BEFORE you experience the subtle, but pernicious bugs that will cost you hours of work. One other interesting side note is that software GL on the new MBP is astonishingly good — for a hot second I had accidentally reverted my registry and didn’t notice until I tried to switch on RealView and it was greyed out. If you don’t need RealView, at least you can finally get decent performance without having to munge around with delicate system settings. If that’s you, stop now and go watch cat videos or something. A huge shoutout to Sean Murphy for contributing hours of trial and error in working this guide out and sharing it with the rest of us. Step 1: Launch the Registry Editor. In the Windows search bar, type “regedit.” Step 2 (optional for the fearless/foolish): Export a backup of your registry. I still never do because my life is actually that boring. Step 3: Go to Computer\HKEY_CURRENT_USER\Software\SolidWorks\SOLIDWORKS ####\Performance\Graphics\Hardware\Current and note the Renderer label. It should be something like SVGA3D; build; RELEASE; LLVM;. Copy that whole string, semicolons and all. You’ll need it to create a new Key later. In the Current key, change the value of the Workarounds DWORD from 10 to 4000480 Step 4: Go to Computer\HKEY_CURRENT_USER\Software\SolidWorks\SOLIDWORKS ####\Performance\Graphics\Hardware\Gl2Shaders\Other. In the left tree of RegEdit, right click on Other. Select New->Key. Paste the name of the Renderer from above exactly as shown in Current (semicolons and all!). In the new folder in the right RegEdit window, right click and create a new 32-bit DWORD. Name the new DWORD Workarounds and give it a value of 40000. Step 5: Go to Computer\HKEY_CURRENT_USER\Software\SolidWorks\SOLIDWORKS ####\Performance\Graphics\Hardware\VMware, Inc. Select the Workarounds key and change the value to 4000480. Step 6: Double check that there is a sub key to VMWare, Inc. (i.e. Gallium, Fusion’s openGL driver) (Good chance there is, so if it’s not there…worry). If so, open folder and change Workarounds value to 4000480. Step 7: Close the Registry Editor and restart Windows. (You might get away without rebooting, but probably not. Just do it.) Launch Solidworks after restarting and either open a file or start a new one. You should see the RealView icon not greyed-out, and under Options > Performance “Use software OpenGL” should be greyed out and unchecked. Now you’re on hardware GL. Win! Step 8 (optional): Export a backup of your registry with the new settings. You shouldn’t have to worry about this much since you now have this guide to refer to, but in I still have PTSD from SW2018 aggressively resetting the registry after every launch through several service packs. Reloading the registry is way faster than redoing all these settings every time. SW2018 can burn for all eternity. Step 9 (even more optional): Autodesk is cutting some killer deals on Fusion360 subscriptions lately. I know Solidworks is the 800lb gorilla, industry standard, and all that, but one of these days someone needs to knock them off the throne so they will actually innovate and offer competitive pricing. Fusion is looking pretty tasty. Be that guy. [A note about Realhack, for the curious: I haven’t had any success with Realhack in several generations. Perhaps it works better with non-Apple spec’ed hardware. I always give it a shake first, to my continual disappointment.] Sadly I have seen an issue with treehouse in SW > 2018 not displaying when using the accelerated graphics, If you switch back to normal graphics it works, YMMV. |