|
Title: Help interfacing mobile phone with pic16f877 Post by: NEOMAT on August 31, 2007, 11:44:25 23:44 I am a new bie with pic but need help from at commands from pic 16f877
any idea? this is from project interfacing mobile phones from job in farm. sorry from may bad english! Title: Re: Help interfacing mobile phone with pic16f877 Post by: chyelim on September 01, 2007, 03:27:03 03:27 Hi, here is some information in the magazine. It is build using AVR but you still can get it change to PIC. It will be no so hard. Enjoy!!
The link: http://www.linkbucks.com/link/fd012432/6322 (PART 1) http://www.linkbucks.com/link/f80e0cd7/6322 (PART 2) Title: Re: Help interfacing mobile phone with pic16f877 Post by: NEOMAT on September 11, 2007, 06:12:52 18:12 Friend
I need any idea from this project in the picture. ;) http://img212.imageshack.us/my.php?image=mobilefixxc1.jpg Title: Re: Help interfacing mobile phone with pic16f877 Post by: digitalmg on September 11, 2007, 08:04:49 20:04 You need this http://www.2n.cz/products/gsm_gateways/analog_gsm_gateway/easygate_analog_gsm_gateway.html
is diffical to make FXS Analog interface for GSM gateway. Title: Re: Help interfacing mobile phone with pic16f877 Post by: roshan on September 13, 2007, 01:46:25 13:46 you have to use at command for communication with mobile. mobile should have gsm modem. Using in serial fashion you can communicate with mobile.
just get one supported mobile interfacing cable & use hyper terminal program In 9600 baud,8n1, type AT & press enter if mobile response with ok, that mean communication is started. Regards Ros |