|
Title: [request] : ft232 project Post by: omidsht on December 21, 2007, 04:37:35 16:37 hi again ,
i need a project that convrts uart of micro to usb using ft232 IC , have any body built it and tested it ? if yes please share it . thanks omid Title: Re: [request] : ft232 project Post by: EDSONCT on December 21, 2007, 04:56:55 16:56 I use a application in ftdi site and work well.
Edson Title: Re: [request] : ft232 project Post by: pedja on December 22, 2007, 01:34:12 01:34 you have shematic in datasheet ;)
Title: Re: [request] : ft232 project Post by: omidsht on December 22, 2007, 07:00:08 07:00 I use a application in ftdi site and work well. Edson hi , please give me it's adddress . thanks omid Title: Re: [request] : ft232 project Post by: Branko on December 22, 2007, 08:35:57 08:35 http://www.ftdichip.com/Documents/Schematics.htm
Title: Re: [request] : ft232 project Post by: Marineland on December 22, 2007, 09:02:24 09:02 Here a breakout (Eagle format) for FT232R from Sparkfun (www.sparkfun.com):
http://www.sparkfun.com/tutorial/BeginningEmbedded/FT232-Breakout-v10.pdf http://www.sparkfun.com/tutorial/BeginningEmbedded/FT232-Breakout-v10.zip Alternate schematic: http://www.compsys1.com/support/docs/usbp3.pdf Title: Re: [request] : ft232 project Post by: omidsht on December 22, 2007, 03:43:09 15:43 thanks guys , branko and marineland ,
okay , when we installed the driver , then which software should we use to monitor received data and to send data out of pc ? omid ;) Title: Re: [request] : ft232 project Post by: Marineland on December 22, 2007, 05:06:15 17:06 okay , when we installed the driver , then which software should we use to monitor received data and to send data out of pc ? Hi omidsht, From Host side (PC), there is two types of driver:
The VCP driver emulates a standard PC serial port such that the USB device may be communicated with as a standard RS232 device. The D2XX driver allows direct access to a USB device via a DLL interface. When you'll plug the FT232R breakout, the windows asks you to install a driver (one of both). If it is your first experiment with the components ftdi, I advise you initially mode VCP... ;) Regards, Marineland Title: Re: [request] : ft232 project Post by: stemli on December 22, 2007, 09:45:12 21:45 hi
diy usb pic programmer has ft232bm chip. ft232 chip is usb to comport converter. so you can use it with serial pic programmer for usb pic programmer. good days Title: Re: [request] : ft232 project Post by: siwat2 on December 25, 2007, 03:27:40 15:27 Can I use any FT product to be USB host?
Title: Re: [request] : ft232 project Post by: drnewton on December 27, 2007, 01:14:10 01:14 The FT series cannot be USB hosts, but FTDI makes another chip, the Vinculum that will act as host. See: www.vinculum.com
Title: Re: [request] : ft232 project Post by: lek05134 on January 10, 2008, 03:01:21 03:01 http://www.ianstedman.co.uk/Projects/PIC_USB_Interface/pic_usb_interface.html
Title: Re: [request] : ft232 project Post by: memed500 on January 10, 2008, 12:05:07 12:05 http://www.eix.co.uk/Ethernet/USB/
|