Sonsivri

mikroElektronika Compilers - Full topic
mikroElektronika develops sophisticated, comprehensive compilers for popular microcontroller series. Highly advanced IDE, source-level Debugger, integrated tools, and many practical examples included, provide the easiest way to program microcontrollers.

Compilers for PIC Microcontrollers:
mikroBasic v7.0.0.2
download:
http://www.easypsoc.com/zip/mikrobasic/mikrobasic_7002_setup.zip

mikroPascal v8.0.0.1
download:
http://www.easypsoc.com/zip/mikropascal/mikropascal_8001_setup.zip

mikroC v8.2.0.0
download:
http://www.easypsoc.com/zip/mikroc/mikroc_8200_setup.zip

Compilers for Microchip dsPIC30/33 and PIC24:
mikroBasic v5.0.0.0
download:
http://www.easypsoc.com/zip/mikrobasic_dspic/mikrobasic_dspic_500_setup.zip

mikroPascal v6.0.0.0
download:
http://www.easypsoc.com/zip/mikropascal_dspic/mikropascal_dspic_600_setup.zip

mikroC v4.0.0.0
download:
http://www.easypsoc.com/zip/mikroc_dspic/mikroc_dspic_4000_setup.zip

Compilers for Atmel AVR:
mikroBasic v4.0.2
download:
http://www.easypsoc.com/zip/mikrobasic_avr/mikrobasic_avr_402_setup.zip

mikroPascal v4.0.2
download:
http://www.easypsoc.com/zip/mikropascal_avr/mikropascal_avr_402_setup.zip

Compilers for 8051:
mikroC v1.0
download:
http://www.easypsoc.com/zip/mikroc_8051/mikroc_8051_1000_setup.zip

All paches here:
http://rapidshare.com/files/133465171/All_in_one_paches.rar

---

Old entries

http://rapidshare.com/files/65160033/mikroPascal_v7.0.0.0_crack.rar
http://rapidshare.com/files/65159896/mikroC_v7.0.0.3_crack.rar
http://rapidshare.com/files/65159862/mikroBasic_v6.0.0.0_crack.rar

  ??? hi embromation,
like crack mikrobasic v6.0.0.0 with the mikrobasic v6.0.0.0 crack.rar?
it seems not to work, it says that it does not find the file or I do not have the authorization!

All links are working but the contents are not the actual cracked software...
Your zipped files are only 14KB each.. Did you check that?

sorry not works!!!!!!!!!

Basic do not work.
Here's the test code.

I have tested, all  of the cracks are OK!

I am using the same cracks, i dowloaded from other source all works fine for me.

Hi,

I'm just wondering why you put so many "Delay_ms(1)" in ? Delay_ms(150) or so will do the same.

Does this has a special reason or is it a mistake ?

With best regards,

Stef.

New crack to microbasic v6.0 not work as it shoud! Any Idea??


I mean if I build large routine I got error messages (demo-limit)!!

Waiting for new working keygen!

Hi,

Setup MikroBasic V6.0.0.0 and working crack: http://rapidshare.com/files/69620777/MikroBasic_V6000.zip.html

This combination works perfectly here. Btw, what do you mean with "not work as it should" ?

Rgds,

Stef.

Excellent work.

Best regards



 8) 8) 8) 8) 8)

Listen, Men!
How many times to say: the guys from RL-Team.Net just like a Kooperfild. It's a bad work. Test a code I'd uploaded before. 26% of uC ROM compiled . It's OK? 
Forget about RL-Team cracks. It's a fiction!

Actually the only working cracks from this team: PIC uPascal 7, AVR uPascal 4.02 and AVR uBasic 4.02. And even in this i'm not shure 100%.

not works

File not found anymore it's  deleted from RS! ???

Hi,
file no found......

Hi,

Uploaded it again: http://rapidshare.com/files/80057187/mikrobasic_6000_setup_plus_crack.zip.html

With best regards,

Stef.

PIC microcontroller has a page segmented memory, what mikroElektronika has done in their compiler software is , they have allowed demo users to use their compilers within one page segment  (2k approximately) while the linker will report a “demo limit” massage when linking a larger code.

If you are using 16F628x for example (demo or full version) will give the same result.
If you are using a chip with a flash memory larger than 2K (example 16F877 or similar), your code will be working if it is less than 2k unless you have the full version.

A good crack should not only disable the “Demo limit” massage but also it should allocate the linker to link codes over the 2k limit.

The crack supplied in this page only disable the “Demo limit” massage however it doesn’t correctly permit the linker to link the full code; so the linker report another linker error “procedure too long” when the code is over one page i.e. larger than 2K.

So this crack is not working… I hope I was clear enough.

Regards;

Hello Faros,

Can you supply an example that fails to compile ?

Please check: http://www.mikroe.com/forum/viewtopic.php?t=12984&highlight=procedure+long

It seems this is more a problem of the compiler itself than a bad crack.

The program comes with some examples, see what happens if you compile a big program with the demo version and what happens after you apply the crack.

Rgds,

Stefkb

Dear Stefkeb

Why should I provide a new code example? Kabron has done this in this page (http://www.sonsivri.com/forum/index.php?action=dlattach;topic=5933.0;attach=595)
In this example the linker will break at almost 26% of the PIC flash code size (page barrier) and will report linker error.(try a real test yourself)

Mikrobasic has some bugs; whenever there is a new version released; it comes with new bug list; but linker limit errors are known to be a cracking error. It has started in their early version 2 and up till now. Last known working crack was done by “Fallout “ as a Keygen for version 4.x. some said it worked also for version 5.x.

Regards;

Hello Faros,

Mikrobasic has it's bugs, I completely agree. The error generated when compiling Kabron's code however is a shortcoming of the compiler, not the crack, please check the link in my previous post to Mikroe's forum where this 2K boundary problem for PIC16 devices is discussed.

The reason I ask for more examples is that I think it is not correct that if a single piece of code fails to compile simply a crack/compiler is believed to be bad.
If we would test all software around like this nothing would make it to market !
Some more testing with reproduceable examples would be fair I believe.

With best regards,

StefkeB.

Dear Stefkeb

I believe I have rushed into that conclusion. I admit I made a mistake.
I always test whatever posted (code/circuit) before making my judgment. Those how made this effort (compilers or crackers) deserve at least more time to judge their attempt.
I just found I lot of code in your link page that I couldn’t test before posting my last reply nevertheless I have tested some examples as you kindly advised and found to be working (especially for 18F series) where memory paging has different management technique.
I had read the complete manual of Mikrobasic version 2.xx (more than 2 years ago) and they have stated that 2k sized procedures are not allowed. That point was dropped because I have never used Mikrobasic since.
I like Mikro-electronica; both the products and the developers, and I see some hidden benefit of using their compilers, If you utilize one efficiently, you are maneuvering them all.  I will do some home work regarding this subject and will get back to you.

Thank you for your patience.

Faros

Hi.

Try :http://rapidshare.com/files/60541767/mikroBasic_v6.0.0.0_Crack.rar.html

MT2005

Posted on: January 27, 2008, 05:10:06 17:10 - Automerged

---

MikroPascal,

Link: http://rapidshare.com/files/59601870/mikroPascal_v7.0.0_Crack.rar.html

MT2005

mikroElektronika Compilers  CRACKS

http://rl-team.net/2007/08/23/mikroc_v7.0.0.3__crack.html
http://rl-team.net/2007/10/06/mikrobasic-v6.0.0.0-crack.html
http://rl-team.net/2007/05/10/mikrobasic_for_avr_v400__patch.html
http://rl-team.net/2007/06/27/mikrobasic_for_avr_v4.0.2__patch.html
http://rl-team.net/2007/10/02/mikropascal-v7.0.0-crack.html

The new compilers are about to come out ......www.mikroe.com has already posted mikroC ver. 8.....

Here is where you can find mikroC 8.0.0.0 & crack.
http://rs383.rapidshare.com/files/87962587/mikroElektronika_mikroC_for_PIC_v8.0.0.0.zip
or
http://depositfiles.com/en/files/3312555

mikroElektronika Compilers - Full topic
mikroElektronika develops sophisticated, comprehensive compilers for popular microcontroller series. Highly advanced IDE, source-level Debugger, integrated tools, and many practical examples included, provide the easiest way to program microcontrollers.

Compilers for PIC Microcontrollers:
mikroBasic v7.0.0.2
download:
http://www.easypsoc.com/zip/mikrobasic/mikrobasic_7002_setup.zip

mikroPascal v8.0.0.1
download:
http://www.easypsoc.com/zip/mikropascal/mikropascal_8001_setup.zip

mikroC v8.2.0.0
download:
http://www.easypsoc.com/zip/mikroc/mikroc_8200_setup.zip

Compilers for Microchip dsPIC30/33 and PIC24:
mikroBasic v5.0.0.0
download:
http://www.easypsoc.com/zip/mikrobasic_dspic/mikrobasic_dspic_500_setup.zip

mikroPascal v6.0.0.0
download:
http://www.easypsoc.com/zip/mikropascal_dspic/mikropascal_dspic_600_setup.zip

mikroC v4.0.0.0
download:
http://www.easypsoc.com/zip/mikroc_dspic/mikroc_dspic_4000_setup.zip

Compilers for Atmel AVR:
mikroBasic v4.0.2
download:
http://www.easypsoc.com/zip/mikrobasic_avr/mikrobasic_avr_402_setup.zip

mikroPascal v4.0.2
download:
http://www.easypsoc.com/zip/mikropascal_avr/mikropascal_avr_402_setup.zip

Compilers for 8051:
mikroC v1.0
download:
http://www.easypsoc.com/zip/mikroc_8051/mikroc_8051_1000_setup.zip

All paches here:
http://rapidshare.com/files/133465171/All_in_one_paches.rar

mikroBasic 6.0

http://rapidshare.com/files/139600297/mikrobasic_6.rar.html

Here's the whole enchilada in one d/l.

Year: 2011
Developer: MikroElektronika
Language: Eng
Size: 389 MB

Compiler had absorbed all the power and flexibility afforded by the standard ANSI C and is the most powerful development tool. Numerous practical examples and detailed documentation can immediately begin working with this compiler

mikroC PRO PIC 2010 V4.15
mikroC PRO AVR 2009 V3.5
mikroC PRO dsPIC 2010 V4.1
mikroC PRO 8051 2009 v2.2

You are a novice user? No problem. Easy to learn syntax of the language BASIC, enhanced compiler and the huge number of practical examples will almost immediately begin work on writing your own program for the microcontroller PIC.

mikroBasic pro PIC 2010 V4.15
mikroBasic pro AVR 2010 V3.5
mikroBasic PRO dsPIC 2010 V4.1
mikroBasic PRO 8051 2009 v2.2

Compiler had absorbed all the power and flexibility provided by ANSI standard and is the most powerful development tool. Numerous practical examples and detailed documentation can immediately begin working with this compiler

mikroPascal pro PIC 2010 v4.15
mikroPascal pro AVR 2010 V3.5
mikroPascal PRO dsPIC 2010 V4.1
mikroPascal PRO 8051 2009 v2.2

mikroC PRO PIC 2010 V4.15
mikroC PRO PIC 2011 V4.6
mikroC PRO dsPIC 2010 V4.1
mikroC PRO dsPIC 2011 V4.6
mikroC PRO AVR 2010 V3.5
mikroC PRO AVR 2011 V4.6
mikroC PRO 8051 2009 V2.2

mikroBasic pro PIC 2010 V4.15
mikroBasic pro PIC 2011 V4.6
mikroBasic pro dsPIC 2010 V4.1
mikroBasic pro dsPIC 2011 V4.6
mikroBasic pro AVR 2010 V3.5
mikroBasic pro AVR 2011 V4.6
mikroBasic pro 8051 2009 V2.2

mikroPascal pro PIC 2010 v4.15
mikroPascal pro PIC 2011 v4.6
mikroPascal pro dsPIC 2010 v4.1
mikroPascal pro dsPIC 2011 v4.6
mikroPascal pro AVR 2010 v3.5
mikroPascal pro AVR 2011 v4.6
mikroPascal pro 8051 2009 v2.2

PackageManagerSetup v1.5
VisualGLCD v1.5
VisualGLCD v1.8

This is untested and no idea if it's medicated.

http://www.fileserve.com/file/3yvKbD6/mikroelektronikamicroBasicmikroBasic_pro_AVR_v4.60mbasic_avr_2.10_kg_new.rar

the latest links on the website are for : mikroC PRO AVR 2011 V4.6
do you mean the patch also work for the new releases ?

funny I see version 6

This is an old topic/thread.  There's a newer thread that contains what you're asking about:
http://www.sonsivri.to/forum/index.php?topic=42296.msg126080#msg126080

This topic is now Locked