|
Title: Dallas 1-Wire for 8051 Post by: sam_des on December 18, 2007, 06:42:28 18:42 Hello Everyone,
This is the Dallas 1-Wire interface Driver & DS18xxx Temp. sensors library for 8051 written by me. Features are- 1) Written is C. 2) Any 1-Wire device can be interfaced easily. 3) Allow multiple 1-Wire devices on same line, limited only by amount RAM. 4) Can detect addition/deletion of device on-the-fly. 5) Allow selection of particular 1-Wire device. 6) Perform the temp. conversion as per type of DS18xxx sensor attached. 7) Comprehensive 4-BIT 20x4 LCD interface with formatted output thourgh printf(). More features coming soon ... I hope you find it useful. Any suggestions/comments/bug reports are welcome. regards, sam_des Title: Re: Dallas 1-Wire for 8051 Post by: sswolf on April 08, 2020, 04:17:27 16:17 404 - Attachment Not Found
Title: Re: Dallas 1-Wire for 8051 Post by: sam_des on April 08, 2020, 07:57:32 19:57 Hello,
That's quite an old project of mine. Let me see if I can find in my backup at home. But most probably its in backup at work which I can't access at this time. Great if anyone else could reup it. sam_des Title: Re: Dallas 1-Wire for 8051 Post by: mick on April 08, 2020, 08:06:33 20:06 Use Bascom 8051...
|