|
Title: JDM programmer Post by: tango on June 10, 2007, 12:22:34 00:22 First Hi to all .
Sorry for my bad English !!! I was make pilot programmer JDM and find something interest !!! On windows 98 SE it work 100% ok also like ICSP. It need little modification to program new PICMICRO but it's OK. But under windows XP SP2 it's not work OK !!! When I programming 16F84A @ 4 MHz case problem in write to PIC and also in ERASE PIC. When I programming 16F84A @ 20 MHZ it's work 100% OK. Also with 16F877A @ 20 MHZ it's work 100% OK. Do somebody explain me that reasn ? I look end if found why, I will post. Best regards to all Title: Re: JDM programmer Post by: pama on June 11, 2007, 03:22:42 15:22 hi,
when i started playing with jdm programmer i had also some problems with this , but most of them was related to IcProg programs (it's just my opinion). After that i swap to using WinPic800, and i never had any problem with this. good luck pama Title: Re: JDM programmer Post by: Rego on June 11, 2007, 04:08:35 16:08 i have the same opinion .... go for winpic 800 (is the best) Title: Re: JDM programmer Post by: tango on June 11, 2007, 05:43:05 17:43 Yes I agree with that but I was have some problem with winpic800, ponyprog and winpic.
In all case of programming was JDM programmer and problem was with pic 16F84 @ 4 MHhz. But in all case I sucess program pic 16F877A and 16F628A and 16F84A all @ 20 MHz. I was probe with in socked and ICSP in all case. My OS is WIN XPSP2. Maybe have some modification for JDM. I only use modification with MOSFET for 16F628A @ 20 MHz. With or without modification for 16F628A and NEW generation of PIC problem is SAME. Is some other modification for JDM ??? Best regards to all :) Title: Re: JDM programmer Post by: shobhitkukreti on June 11, 2007, 07:04:21 19:04 No der isnt any other modification required for d JDM.. i use winpic and it works well under both win98 se and winXPSP2
Title: Re: JDM programmer Post by: sheriefaly on January 28, 2008, 08:43:55 08:43 winpic 800 is great do not miss it
|