Wizpic
Global Moderator
Hero Member
Offline
Posts: 1200
Thank You
-Given: 543
-Receive: 408
|
|
« on: October 23, 2005, 11:52:43 11:52 » |
|
Has anybody got the latest exe and firmwear for pic as it'sall password proctected now :mad: please share wizpic
|
|
|
Logged
|
When you think, "I can't do anymore. I need a break," that is the time to challenge yourself to keep going another five minutes. Those who persevere for even an extra five minutes will win in life..
|
|
|
stroma
Newbie
Offline
Posts: 31
Thank You
-Given: 4
-Receive: 2
|
|
« Reply #1 on: October 23, 2005, 07:47:02 19:47 » |
|
i'm looking for warp's firmware too. anyone with newfound membership share please ...
|
|
|
Logged
|
best regards, stroma
|
|
|
metal
Global Moderator
Hero Member
Offline
Posts: 2420
Thank You
-Given: 862
-Receive: 678
Top Topic Starter
|
|
« Reply #2 on: October 26, 2005, 10:35:03 22:35 » |
|
Hi
I got it all guys !!
But there is a problem any way....
A friend built it, when installed the software, and connected the programmer to his PC, the software asked for a license !!
I have the software & firmware, along with eagle design files, if any is still interested, let me know...
C U
|
|
|
Logged
|
|
|
|
Wizpic
Global Moderator
Hero Member
Offline
Posts: 1200
Thank You
-Given: 543
-Receive: 408
|
|
« Reply #3 on: October 26, 2005, 10:53:32 22:53 » |
|
yes please i would like it very much can you upload please
wizpic
|
|
|
Logged
|
When you think, "I can't do anymore. I need a break," that is the time to challenge yourself to keep going another five minutes. Those who persevere for even an extra five minutes will win in life..
|
|
|
metal
Global Moderator
Hero Member
Offline
Posts: 2420
Thank You
-Given: 862
-Receive: 678
Top Topic Starter
|
|
« Reply #4 on: October 26, 2005, 11:01:15 23:01 » |
|
Hi WizPic
No need to send PMs in order to ask for some thing that I will upload for pulic benefit..
Good luck
|
|
|
Logged
|
|
|
|
Wizpic
Global Moderator
Hero Member
Offline
Posts: 1200
Thank You
-Given: 543
-Receive: 408
|
|
« Reply #5 on: October 26, 2005, 11:07:48 23:07 » |
|
:eek: Sorry Metal Give me a slap on the wrist (och! that hurt) i just got a bit carried away and over exticeted cheers Wizpic:cool:
|
|
|
Logged
|
When you think, "I can't do anymore. I need a break," that is the time to challenge yourself to keep going another five minutes. Those who persevere for even an extra five minutes will win in life..
|
|
|
metal
Global Moderator
Hero Member
Offline
Posts: 2420
Thank You
-Given: 862
-Receive: 678
Top Topic Starter
|
|
« Reply #6 on: October 26, 2005, 11:13:25 23:13 » |
|
Ok man No problem, No hard feelings....
|
|
|
Logged
|
|
|
|
nimdonia
Newbie
Offline
Posts: 19
Thank You
-Given: 3
-Receive: 1
|
|
« Reply #7 on: October 27, 2005, 08:12:31 20:12 » |
|
metal, have u tried programming 18f4550.. wic firmware u have? i cant seem to program 18f4550,... c1 comms error,... need to drop vpp voltage? wat do u think.
|
|
|
Logged
|
|
|
|
stroma
Newbie
Offline
Posts: 31
Thank You
-Given: 4
-Receive: 2
|
|
« Reply #8 on: October 27, 2005, 09:52:54 21:52 » |
|
Hi, im working on usb based w@rp13. it is all usb powered design based on ft232bm usb to com bridge chip. I thing that it will be a good ICSP picstart replacement. I got stable communication with mplab 7.20 but I have not programmed any pic’s yet … I have not much time to spend on this right now …
best regard stroma
|
|
|
Logged
|
best regards, stroma
|
|
|
Wizpic
Global Moderator
Hero Member
Offline
Posts: 1200
Thank You
-Given: 543
-Receive: 408
|
|
« Reply #9 on: October 27, 2005, 10:10:49 22:10 » |
|
Stroma you gona share it with us
Metal any joy yet with zipping
cheers
wizpic
|
|
|
Logged
|
When you think, "I can't do anymore. I need a break," that is the time to challenge yourself to keep going another five minutes. Those who persevere for even an extra five minutes will win in life..
|
|
|
metal
Global Moderator
Hero Member
Offline
Posts: 2420
Thank You
-Given: 862
-Receive: 678
Top Topic Starter
|
|
« Reply #10 on: October 28, 2005, 09:21:25 21:21 » |
|
Hi I have already uploaded all files I got for Wrap13.... Wrap13 Files The password for the rar file is: MetaL Good Luck !
|
|
|
Logged
|
|
|
|
Wizpic
Global Moderator
Hero Member
Offline
Posts: 1200
Thank You
-Given: 543
-Receive: 408
|
|
« Reply #11 on: October 28, 2005, 10:08:14 22:08 » |
|
Nice one Metal but i can't seem to ge it it keeps taking to to the upload page i had this troubel ealier when i was trying to download anohter file from there strange
cheers
wizpic
|
|
|
Logged
|
When you think, "I can't do anymore. I need a break," that is the time to challenge yourself to keep going another five minutes. Those who persevere for even an extra five minutes will win in life..
|
|
|
metal
Global Moderator
Hero Member
Offline
Posts: 2420
Thank You
-Given: 862
-Receive: 678
Top Topic Starter
|
|
« Reply #12 on: October 28, 2005, 10:11:25 22:11 » |
|
Hi
WizPic, you are really a pain in the ***, the link is working just fine....
|
|
|
Logged
|
|
|
|
Wizpic
Global Moderator
Hero Member
Offline
Posts: 1200
Thank You
-Given: 543
-Receive: 408
|
|
« Reply #13 on: October 28, 2005, 10:21:35 22:21 » |
|
Yeah I know i am and yes the link is working fine problem solved it was my end as i said i had trouble before even with some other files i wanted to download from another site but got it now
good job
wizpic
|
|
|
Logged
|
When you think, "I can't do anymore. I need a break," that is the time to challenge yourself to keep going another five minutes. Those who persevere for even an extra five minutes will win in life..
|
|
|
Wizpic
Global Moderator
Hero Member
Offline
Posts: 1200
Thank You
-Given: 543
-Receive: 408
|
|
« Reply #14 on: October 28, 2005, 10:26:35 22:26 » |
|
Metal I'm gona piss you off even more :mad: sorry can you get the latest files firmware is 1.6(j) and exe is now on (n) if not this one will be fine cheers wizpic:cool:
|
|
|
Logged
|
When you think, "I can't do anymore. I need a break," that is the time to challenge yourself to keep going another five minutes. Those who persevere for even an extra five minutes will win in life..
|
|
|
stroma
Newbie
Offline
Posts: 31
Thank You
-Given: 4
-Receive: 2
|
|
« Reply #15 on: November 08, 2005, 04:53:33 16:53 » |
|
I have last free firmware 1.6 (g) here you are ..
Did someone try to disassemble firmware? I got quite messy asm output file and reassembled hex did not work. I’m trying to invert RS232 pins logic. This will eliminate the need of hardware invertors after /..and smaller PCB../ FT232BM USB<>COM bridge. It would be nice for my USB powered ICSP warp.
|
|
|
Logged
|
best regards, stroma
|
|
|
sarco
Newbie
Offline
Posts: 16
Thank You
-Given: 1
-Receive: 0
|
|
« Reply #16 on: November 12, 2005, 12:55:06 00:55 » |
|
hi warp13a latest version(n) plus (j) firmware +schematic sarco
|
|
|
Logged
|
|
|
|
Bacra2k
Junior Member
Offline
Posts: 37
Thank You
-Given: 11
-Receive: 22
|
|
« Reply #17 on: November 12, 2005, 05:33:24 05:33 » |
|
The .sch file you can open with Eagle, it's the schematic file; and it works with all pics as claimed (i'd tested all 16XXX and 12XXX except 18XXX)
Salu2
|
|
|
Logged
|
|
|
|
fuzuli
Newbie
Offline
Posts: 11
Thank You
-Given: 73
-Receive: 48
|
|
« Reply #18 on: November 12, 2005, 09:47:16 09:47 » |
|
The .sch file you can open with Eagle, it's the schematic file; and it works with all pics as claimed (i'd tested all 16XXX and 12XXX except 18XXX)
Salu2 Please send if you have pcb for warp13.... thanks
|
|
|
Logged
|
|
|
|
Bacra2k
Junior Member
Offline
Posts: 37
Thank You
-Given: 11
-Receive: 22
|
|
« Reply #19 on: November 12, 2005, 04:37:28 16:37 » |
|
Here is the pcb file in Eagle format
Salu2
|
|
|
Logged
|
|
|
|
fuzuli
Newbie
Offline
Posts: 11
Thank You
-Given: 73
-Receive: 48
|
|
« Reply #20 on: November 12, 2005, 08:41:54 20:41 » |
|
Dear bacra2k;
Thanks pcb for warp13....
|
|
|
Logged
|
|
|
|
sarco
Newbie
Offline
Posts: 16
Thank You
-Given: 1
-Receive: 0
|
|
« Reply #21 on: November 12, 2005, 10:59:09 22:59 » |
|
hi the warp-13a pcb has awrong connect i will post acorrect one soon plz wait sarco
|
|
« Last Edit: November 12, 2005, 11:11:13 23:11 by sarco »
|
Logged
|
|
|
|
sarco
Newbie
Offline
Posts: 16
Thank You
-Given: 1
-Receive: 0
|
|
« Reply #22 on: November 13, 2005, 03:18:38 03:18 » |
|
hi This is the correct warp13a brd tested sarco
|
|
« Last Edit: November 13, 2005, 03:22:42 03:22 by sarco »
|
Logged
|
|
|
|
stroma
Newbie
Offline
Posts: 31
Thank You
-Given: 4
-Receive: 2
|
|
« Reply #23 on: November 13, 2005, 10:51:27 10:51 » |
|
sarco, thank you, for latest firmware & software. I hope it will be updated regularly in this forum
|
|
|
Logged
|
best regards, stroma
|
|
|
metal
Global Moderator
Hero Member
Offline
Posts: 2420
Thank You
-Given: 862
-Receive: 678
Top Topic Starter
|
|
« Reply #24 on: November 15, 2005, 10:12:22 10:12 » |
|
Hey Beserk
I solved the 285 error problem, you can open the files now....
|
|
|
Logged
|
|
|
|
sarco
Newbie
Offline
Posts: 16
Thank You
-Given: 1
-Receive: 0
|
|
« Reply #25 on: November 15, 2005, 11:55:16 11:55 » |
|
hi the version i have posted is the latest due to this link http://www.newfoundelectronics.com/downloads.htmbut if you want you can use the 16f876a with another firmware i will post it here next time sarco
|
|
|
Logged
|
|
|
|
sarco
Newbie
Offline
Posts: 16
Thank You
-Given: 1
-Receive: 0
|
|
« Reply #26 on: November 15, 2005, 07:03:09 19:03 » |
|
hi this is the 16f876a firmware for warp13a comptable with my post tittled the correct brd for warp13a sarco
|
|
« Last Edit: November 15, 2005, 07:17:34 19:17 by sarco »
|
Logged
|
|
|
|
Wizpic
Global Moderator
Hero Member
Offline
Posts: 1200
Thank You
-Given: 543
-Receive: 408
|
|
« Reply #27 on: November 19, 2005, 11:43:52 11:43 » |
|
theres new warp13 exe file warp13.exer(o) can some one upload pleease wizpic
|
|
|
Logged
|
When you think, "I can't do anymore. I need a break," that is the time to challenge yourself to keep going another five minutes. Those who persevere for even an extra five minutes will win in life..
|
|
|
[email protected]
Newbie
Offline
Posts: 8
Thank You
-Given: 0
-Receive: 0
|
|
« Reply #28 on: December 14, 2005, 03:40:19 03:40 » |
|
hai i am from coimbatore, tamilnadu i got pdf for this pcb if u want pls send me a pm
by
|
|
|
Logged
|
|
|
|
[email protected]
Newbie
Offline
Posts: 8
Thank You
-Given: 0
-Receive: 0
|
|
« Reply #29 on: December 14, 2005, 03:41:53 03:41 » |
|
hai beserk
or u do onething u just send your address to me i will send you the pcb
|
|
|
Logged
|
|
|
|
picstart
Guest
|
|
« Reply #30 on: December 24, 2005, 02:16:54 14:16 » |
|
i am trying to build this programmer. Can someone tell me what are the components indicated by the arrows in the figure? Can the resonator be replaced with a crystal?
|
|
|
Logged
|
|
|
|
Wizpic
Global Moderator
Hero Member
Offline
Posts: 1200
Thank You
-Given: 543
-Receive: 408
|
|
« Reply #31 on: December 24, 2005, 03:35:23 15:35 » |
|
One at the to is a push to make button (restets the programmer) the one at the bottom is the round black thing) is a 1.5amp bridge rectifier hope this helps wizpic
|
|
|
Logged
|
When you think, "I can't do anymore. I need a break," that is the time to challenge yourself to keep going another five minutes. Those who persevere for even an extra five minutes will win in life..
|
|
|
Faros
Senior Member
Offline
Posts: 254
Thank You
-Given: 141
-Receive: 178
|
|
« Reply #32 on: December 24, 2005, 05:42:15 17:42 » |
|
I confirm what Wizpic said.... the reset is indicated on the PCB and the I/P voltage is 12 v AC , so the rectifier is needed … A lot of info about WARP13A can be found in this page .. http://www.newfoundelectronics.com/warp-13a.htm
|
|
|
Logged
|
|
|
|
pl4tonas
Active Member
Offline
Posts: 145
Thank You
-Given: 318
-Receive: 195
|
|
« Reply #33 on: January 05, 2006, 01:57:02 13:57 » |
|
Hello people, The new version of Warp13.exe (o) is here: [url=http://rapidshare.de/files/10442687/w13o.rar][color=#0000ff][url=http://rapidshare.de/files/10442687/w13o.rar]http://rapidshare.de/files/10442687/w13o.rar[/color][/url][/url] have a nice day.
|
|
|
Logged
|
|
|
|
picstart
Guest
|
|
« Reply #34 on: January 05, 2006, 02:21:43 14:21 » |
|
Thank you so much pl4tonas.Do you have the lates hex file also ..i.e 1.7 ? ps: the passwd of above file is pl4tonas
|
|
« Last Edit: January 05, 2006, 03:09:53 15:09 by picstart »
|
Logged
|
|
|
|
pl4tonas
Active Member
Offline
Posts: 145
Thank You
-Given: 318
-Receive: 195
|
|
« Reply #35 on: January 05, 2006, 06:06:18 18:06 » |
|
First, my appologies for forgetting the password and my thanks to picstart who posted it. The password is "pl4tonas" About the hex file, sorry but I dont have anything newer than 1.6j. I think there is no 1.7 available yet. When something comes to my hands I will try to post it. In case I forget again the password, this sould be tha same as before. For those that I caused inconvinience, please forgive me. regards P.
|
|
|
Logged
|
|
|
|
|
picstart
Guest
|
|
« Reply #37 on: January 09, 2006, 01:00:06 13:00 » |
|
I built this programmer using the pcb/schematic posted in this thread. But I'm getting lot of program errors after I burn a hex file. Also the red LED isn't glowing- btw when is it supposed to glow?
|
|
|
Logged
|
|
|
|
picstart
Guest
|
|
« Reply #38 on: January 13, 2006, 03:38:01 15:38 » |
|
When i try to program PIC 18f452 using my self-made warp 13 programmer ( latest firmware and software) I get program word errors on verifying. Someone please help :confused: Thank you!
|
|
|
Logged
|
|
|
|
kevin0204
Inactive
Offline
Posts: 5
Thank You
-Given: 2
-Receive: 0
|
|
« Reply #39 on: January 13, 2006, 05:59:01 17:59 » |
|
|
|
|
Logged
|
|
|
|
kevin0204
Inactive
Offline
Posts: 5
Thank You
-Given: 2
-Receive: 0
|
|
« Reply #40 on: January 14, 2006, 07:45:12 07:45 » |
|
|
|
|
Logged
|
|
|
|
Wizpic
Global Moderator
Hero Member
Offline
Posts: 1200
Thank You
-Given: 543
-Receive: 408
|
|
« Reply #41 on: January 14, 2006, 09:26:09 09:26 » |
|
Dam good work Kevein thanks for sharing we are all grateful to you does this work with the standard software which is o i think cheers wizpic
|
|
|
Logged
|
When you think, "I can't do anymore. I need a break," that is the time to challenge yourself to keep going another five minutes. Those who persevere for even an extra five minutes will win in life..
|
|
|
picstart
Guest
|
|
« Reply #42 on: January 14, 2006, 02:10:58 14:10 » |
|
Thanks kevin for latest hex file. What about my problem...if anyone has any idea:confused:
Please!!!
I used the same pcb but without the extra ground copper ! does it make any difference.
Btw the input is 16v in some circuits and 12v in others...??!!
|
|
|
Logged
|
|
|
|
tdsnet
Guest
|
|
« Reply #43 on: January 14, 2006, 03:12:14 15:12 » |
|
hi, picstart
If you use the same pcb , check components.
Some pcb uses 12v AC with bridge rectifier (12*1.414=17v) other pcb uses 16-18 VDC. At 7805(pin3) you must have +5V. (for pin20 of f252) At 7815(Pin3) you must have +15V
|
|
|
Logged
|
|
|
|
Wizpic
Global Moderator
Hero Member
Offline
Posts: 1200
Thank You
-Given: 543
-Receive: 408
|
|
« Reply #44 on: January 15, 2006, 10:19:59 10:19 » |
|
Kevin what it you design your pcb in have you got the gerber files and the working schematic you made it from theres that many flying around not sure which one is which can you opload what you have got cheers wizpic
|
|
|
Logged
|
When you think, "I can't do anymore. I need a break," that is the time to challenge yourself to keep going another five minutes. Those who persevere for even an extra five minutes will win in life..
|
|
|
kevin0204
Inactive
Offline
Posts: 5
Thank You
-Given: 2
-Receive: 0
|
|
« Reply #45 on: January 15, 2006, 03:34:56 15:34 » |
|
Kevin what it you design your pcb in have you got the gerber files and the working schematic you made it from theres that many flying around not sure which one is which can you opload what you have got cheers wizpic http://rapidshare.de/files/11097547/warp13_A.rar several eagle schematic and pcb file from internet (here and other site) but this one is 100% work. i don't know who designed this file. i am only modify wire size.
|
|
|
Logged
|
|
|
|
selim
Guest
|
|
« Reply #46 on: January 19, 2006, 03:43:29 15:43 » |
|
HI kevin Please i try pass: filname or lastest for the file lastest.rar but no success please i want the pass for this file Thank you in advance
|
|
|
Logged
|
|
|
|
mmengi
Guest
|
|
« Reply #47 on: January 19, 2006, 07:14:44 19:14 » |
|
hi selim, Password is "lastest.rar"
|
|
|
Logged
|
|
|
|
stroma
Newbie
Offline
Posts: 31
Thank You
-Given: 4
-Receive: 2
|
|
« Reply #48 on: January 20, 2006, 08:13:40 20:13 » |
|
Hi guys, I’m experimenting with usb powered icsp warp13. schematic is on the links below … http://icd2.narod.ru/w13usb1.jpghttp://icd2.narod.ru/w13usb2.jpg What you think about this idea? Any suggestions and/or error correction are welcome!
|
|
|
Logged
|
best regards, stroma
|
|
|
nimdonia
Newbie
Offline
Posts: 19
Thank You
-Given: 3
-Receive: 1
|
|
« Reply #49 on: May 05, 2006, 06:06:51 18:06 » |
|
hi guys, can soemone repost the lastest.rar... need latest firmware... link to rapidshare says tht it had been deleted... thnx
|
|
|
Logged
|
|
|
|
[email protected]
Newbie
Offline
Posts: 8
Thank You
-Given: 0
-Receive: 0
|
|
« Reply #50 on: May 06, 2006, 06:12:46 18:12 » |
|
hai those two winrar files were not exist pls repost it with regards
|
|
|
Logged
|
|
|
|
aamir
Hero Member
Offline
Posts: 505
Thank You
-Given: 37
-Receive: 229
|
|
« Reply #51 on: May 07, 2006, 03:47:13 15:47 » |
|
HELLO ,
Please upload schametic and PCB for WRAP13A in orcad as i have not work on
Eagle thanks.
|
|
|
Logged
|
|
|
|
adrian
Newbie
Offline
Posts: 30
Thank You
-Given: 27
-Receive: 14
|
|
« Reply #52 on: June 18, 2006, 08:44:30 08:44 » |
|
sigh... im getting failled programming as welll... n i cant seem to burn the 252 chips... plenty of errors... anyone has a fix to this?
|
|
|
Logged
|
|
|
|
platonas
Guest
|
|
« Reply #53 on: October 06, 2006, 03:34:32 15:34 » |
|
The bluePole 1.7a firmware file is on http://rapidshare.de/files/35714923/bp1.7a.rar pass is pl4tonas
|
|
|
Logged
|
|
|
|
mizk_electro
Cracking Team
Active Member
Offline
Posts: 133
Thank You
-Given: 5
-Receive: 3
|
|
« Reply #54 on: October 15, 2006, 09:55:44 09:55 » |
|
Kevin what it you design your pcb in have you got the gerber files and the working schematic you made it from theres that many flying around not sure which one is which can you opload what you have got cheers wizpic http://rapidshare.de/files/11097547/warp13_A.rar several eagle schematic and pcb file from internet (here and other site) but this one is 100% work. i don't know who designed this file. i am only modify wire size. Kevin, Can you upload the schematic too ... because to change the Vdc (12V) connector. Thanks
|
|
|
Logged
|
|
|
|
DieSPeeK
Guest
|
|
« Reply #55 on: October 15, 2006, 07:35:36 19:35 » |
|
Hi platonas, Could you upload WARP13.EXE(o) software? Regards
|
|
|
Logged
|
|
|
|
pl4tonas
Active Member
Offline
Posts: 145
Thank You
-Given: 318
-Receive: 195
|
|
« Reply #56 on: October 22, 2006, 04:04:19 16:04 » |
|
yeap, Here it is, only the warp13o.exe file [url]http://rapidshare.de/files/10442687/w13o.rar[/url] pass is pl4tonas
|
|
|
Logged
|
|
|
|
Donovan
Newbie
Offline
Posts: 29
Thank You
-Given: 9
-Receive: 0
|
|
« Reply #57 on: January 14, 2007, 09:56:59 09:56 » |
|
Hello,
has anyone the schematic for the original Warp13a? I have some problems with my programmer and cannot get a connection to my pc.
Thanks
Donovan
|
|
|
Logged
|
|
|
|
juliano barcik
Guest
|
|
« Reply #58 on: May 08, 2007, 04:30:54 04:30 » |
|
|
|
|
Logged
|
|
|
|
Donovan
Newbie
Offline
Posts: 29
Thank You
-Given: 9
-Receive: 0
|
|
« Reply #59 on: May 13, 2007, 06:12:33 18:12 » |
|
Thanks for the files
Donovan
|
|
|
Logged
|
|
|
|
Ahmad_k
SCG Moderator
Hero Member
Offline
Posts: 747
Thank You
-Given: 169
-Receive: 1289
|
|
« Reply #60 on: June 03, 2007, 10:16:03 22:16 » |
|
Anyone Have the new bluepole 1.7.a firmware ? and an eagle file for the usb version please
|
|
|
Logged
|
|
|
|
|
Wizpic
Global Moderator
Hero Member
Offline
Posts: 1200
Thank You
-Given: 543
-Receive: 408
|
|
« Reply #62 on: August 31, 2007, 08:24:53 20:24 » |
|
anybody got the latest EXE file ?
cheers
wizpic
|
|
|
Logged
|
When you think, "I can't do anymore. I need a break," that is the time to challenge yourself to keep going another five minutes. Those who persevere for even an extra five minutes will win in life..
|
|
|
pl4tonas
Active Member
Offline
Posts: 145
Thank You
-Given: 318
-Receive: 195
|
|
« Reply #63 on: September 06, 2007, 04:52:47 16:52 » |
|
Hello people, The latest EXE file, version 1.9.8 (o) is here: http://rapidshare.com/files/53820199/warp13_o.rar no password needed. The bluep0le firmware 1.7a is here: http://rapidshare.com/files/43835626/bluepole1.7a.zip again no password needed. Regards P.
|
|
|
Logged
|
|
|
|
MAXPAYNE
Hero Member
Offline
Posts: 697
Thank You
-Given: 493
-Receive: 363
It's a little funny......
|
|
« Reply #64 on: September 19, 2007, 05:26:32 05:26 » |
|
What is warp13a ? What are the advantages
|
|
|
Logged
|
Whats the Craziest Project u have done lately...?
|
|
|
simyaci
Newbie
Offline
Posts: 16
Thank You
-Given: 226
-Receive: 31
|
|
« Reply #65 on: September 19, 2007, 06:06:40 06:06 » |
|
What are the advantages pic paralel port progremmer 16c57 vb.
|
|
|
Logged
|
|
|
|
pl4tonas
Active Member
Offline
Posts: 145
Thank You
-Given: 318
-Receive: 195
|
|
« Reply #66 on: September 19, 2007, 11:15:01 11:15 » |
|
No Warp13a is not a parallel port programmer but a serial port one. To see what are its features you can go to: www.newfoundelectronics.com where is the site of the manufacturer.
|
|
|
Logged
|
|
|
|
jzaghal
Active Member
Offline
Posts: 166
Thank You
-Given: 494
-Receive: 55
|
|
« Reply #67 on: November 09, 2007, 01:52:37 13:52 » |
|
Hello my friends,
Can somebody share the latest version of firmware and software.
Thanks.
|
|
|
Logged
|
|
|
|
hodahel
Active Member
Offline
Posts: 103
Thank You
-Given: 189
-Receive: 6
Catch me...
|
|
« Reply #68 on: November 15, 2007, 07:02:18 07:02 » |
|
Warp13 is a "DEAD" programmer i think...no more updates?
|
|
« Last Edit: November 16, 2007, 02:32:57 02:32 by hodahel »
|
Logged
|
|
|
|
Wizpic
Global Moderator
Hero Member
Offline
Posts: 1200
Thank You
-Given: 543
-Receive: 408
|
|
« Reply #69 on: November 15, 2007, 11:39:17 23:39 » |
|
yes your right you need a user name and password to again access teh that web page
Sorry but I do not know it
wizpic
|
|
|
Logged
|
When you think, "I can't do anymore. I need a break," that is the time to challenge yourself to keep going another five minutes. Those who persevere for even an extra five minutes will win in life..
|
|
|
pl4tonas
Active Member
Offline
Posts: 145
Thank You
-Given: 318
-Receive: 195
|
|
« Reply #70 on: November 16, 2007, 05:47:43 05:47 » |
|
The page is not accessible ( www.newfoundelectronics.com) it give an error "403 Forbidden", You don't have permission to access / on this server. It seems that either is closed down or a password is needed. Anyway the firmware is in my Rapidshare folder (Blu3p0le 1.7a) as is the latest executable of the software (w a r p 13 O version) I will lockate the setup file of the software and upload it some time later.
|
|
|
Logged
|
|
|
|
jzaghal
Active Member
Offline
Posts: 166
Thank You
-Given: 494
-Receive: 55
|
|
« Reply #71 on: November 18, 2007, 05:08:48 17:08 » |
|
Hello, Seems there is a new site in place of the old one. Warp-13a seems to be discontinued, check: http://www.dontronics.com/newfound.htmlI like this programmer, only snag it is serial - based. The programmer is mature with almost no problems, and you can easily build a clone. Cheers.
|
|
|
Logged
|
|
|
|
Ahmad_k
SCG Moderator
Hero Member
Offline
Posts: 747
Thank You
-Given: 169
-Receive: 1289
|
|
« Reply #72 on: December 21, 2007, 05:50:23 17:50 » |
|
The Warp13 project is closed now
|
|
|
Logged
|
|
|
|
Ahmad_k
SCG Moderator
Hero Member
Offline
Posts: 747
Thank You
-Given: 169
-Receive: 1289
|
|
« Reply #73 on: March 10, 2008, 04:55:16 16:55 » |
|
warp13 project is discontinued :-(
We know that the Warp13 project is discontinued. Read only my last reply.
|
|
|
Logged
|
|
|
|
hhh4h
Guest
|
|
« Reply #74 on: April 20, 2008, 04:49:50 16:49 » |
|
So what is a good replacement? I need something that works with microchip pics and serial eeproms
|
|
|
Logged
|
|
|
|
Wizpic
Global Moderator
Hero Member
Offline
Posts: 1200
Thank You
-Given: 543
-Receive: 408
|
|
« Reply #75 on: April 20, 2008, 05:06:48 17:06 » |
|
PICKIT2 from microchip they arecheap to buy, or do a search and you will get the info to build your own even have a look on google
wizpic
|
|
|
Logged
|
When you think, "I can't do anymore. I need a break," that is the time to challenge yourself to keep going another five minutes. Those who persevere for even an extra five minutes will win in life..
|
|
|
hhh4h
Guest
|
|
« Reply #76 on: April 20, 2008, 05:27:39 17:27 » |
|
Built a parallel port based one long ago. Warp was good with the integration into mplab. Any experience with MElabs U2? Uses a USB interface instead of serial and no external ps.
|
|
|
Logged
|
|
|
|
madhan7710
Junior Member
Offline
Posts: 74
Thank You
-Given: 48
-Receive: 155
|
|
« Reply #77 on: May 18, 2008, 11:21:30 11:21 » |
|
am using Winpic800 summer version and is working very great and it supports most of the pic chips am usinf.. the only problem in this version is I2C eeprom programming not working properly.. apart from that very best USB programmer. am using in my laptop also without any problems.
|
|
|
Logged
|
|
|
|
|