|
Title: interface with printer Post by: warco2551 on May 21, 2008, 03:22:12 03:22 hi friend
where can i find the information for mcs51 interface with printer Title: Re: interface with printer Post by: chaleekan on May 21, 2008, 03:37:58 03:37 you can see www.thaiio.com
Title: Re: interface with printer Post by: LabBoy on May 23, 2008, 12:14:24 12:14 Hi, Below link is the best example for printer port (Parallel Port) application.
http://engr.nmsu.edu/~etti/fall96/computer/printer/printer.html Title: Re: interface with printer Post by: oscar.inc on July 01, 2008, 07:54:24 07:54 conect the microcontroller, to the ds276 c.i, is a tranceiver rs232, configure the uart to 9600 bps,8,n,1 from bascom o other development software,make the ground common, and conecting tx to rx of te printer to the microcontroller, general , the printers have db25 conector,you will sure is rs232, , the comand is the nex "text" and (13) for enter and skip line, for more information about the conectors you can see pinout.ru, remember, the ground common 8) 8) 8) regards
|