|
Title: Pressure sensor Post by: cenkar on March 05, 2008, 07:46:59 19:46 Hello Pressure sensor + lm324 circuit diagram searc. Thanks Title: Re: Pressure sensor Post by: 8K51 on March 05, 2008, 09:54:02 21:54 a simple schematic with LM324 equivalent :
Title: Re: Pressure sensor Post by: POWERMAN on March 09, 2008, 11:57:01 23:57 Here a schematic for you.
Title: Re: Pressure sensor Post by: free on March 10, 2008, 10:00:03 22:00 Using Instrumentation Amplifier(InAmp) chip is better than build InAmp from general purpose opamp(GPO).
I tried build from GPO with 1% resistors, but the result is not satisfy, the gain is too far from what I want. Title: Re: Pressure sensor Post by: POWERMAN on March 11, 2008, 09:16:04 09:16 Hi,
i using this schematic for MPX2010D and is work fine, i do correction parameters (offset and range) with autocalibration by soft. Instrument amplifier is better, yes, but more expensive too. All depend about application goals. regards. Title: Re: Pressure sensor Post by: anemon06 on March 11, 2008, 11:41:10 11:41 http://www.sonsivri.com/forum/index.php?topic=10598.msg45424#msg45424
This post mpx4150 pressure sensor applicaiton Title: Re: Pressure sensor Post by: Kova on March 11, 2008, 05:00:20 17:00 This post mpx4150 pressure sensor applicaiton I haven't found the project :( In the .rar file there are 10 projects but none use the mpx4150 sensor :( Title: Re: Pressure sensor Post by: anemon06 on March 12, 2008, 10:43:57 10:43 Ok. attached this file. source kode picbasic
Title: Re: Pressure sensor Post by: armandiaz on April 18, 2008, 06:03:12 18:03 If you are looking for barometric sensor I suggest you to have a look at: www.hoperf.com www.wti.fi They have cheap sensors a lot more accurate than the Freescale ones. Title: Re: Pressure sensor Post by: AdiN on May 01, 2008, 09:06:57 21:06 lm324 circuit diagram search.
|